• Composites Research
• /
• v.36 no.6
• /
• pp.441-447
• /
• 2023

Recently, as demand for high-strength, lightweight materials has increased, there has been great interest in joining with metals. In the case of mechanical bonding, such as bolting and riveting, chemical bonding using adhesives is attracting attention as stress concentration, cracks, and peeling occur. In this paper, surface treatment was performed to improve the adhesive strength, and the change in adhesive strength was analyzed. For the adhesive strength test were conducted with Carbon Fiber Reinforced Plastic(CFRP), CR340(Steel), and Al6061(Aluminum), and laser and plasma surface treatment were used. After plasma surface treatment, the adhesive strength improved by 7.3% and 39.2% in CFRP-CR340 and CFRP-Al6061, respectively. CR340-Al6061 was improved by 56.2% in laser surface treatment. Surface free energy(SFE) was measured by contact angle after plasma treatment, and it is thought that the adhesion strength was improved by minimizing damage through a chemical reaction mechanism. For laser surface treatment, it is thought that creates a rough bonding surface and improves adhesive strength due to the mechanical interlocking effect. Therefore, surface treatment is effect to improve adhesive strength, and based on this paper, the long-term fatigue test will be conducted to prevent fatigue failure, which is a representative cause of actual structural damage.

• Animal Bioscience
• /
• v.37 no.8
• /
• pp.1474-1482
• /
• 2024

Objective: The experiment aimed to determine the standardized ileal digestibility (SID) of crude protein (CP) and amino acids (AA) in 10 brown rice samples fed to pigs, and to construct predictive models for SID of CP and AA based on the physical characteristics and chemical composition of brown rice. Methods: Twenty-two cannulated pigs (initial body weight: 42.0±1.2 kg) were assigned to a replicated 11×3 incomplete Latin square design, including an N-free diet and 10 brown rice diets. Each period included 5 d adaptation and 2 d ileal digesta collection. Chromic oxide was added at 0.3% to all the diets as an indigestible marker for calculating the ileal CP and AA digestibility. Results: The coefficients of variation of all detected indices for physical characteristics and chemical composition, except for bulk weight, dry matter (DM) and gross energy, in 10 brown rice samples were greater than 10%. The SID of CP, lysine (Lys), methionine, threonine (Thr), and tryptophan (Trp) in brown rice was 77.2% (62.6% to 85.5%), 87.5% (80.3% to 94.3%), 89.2% (78.9% to 98.9%), 55.4% (46.1% to 67.6%) and 92.5% (86.3% to 96.3%), respectively. The best prediction equations for the SID of CP, Lys, Thr, and Trp were as following, SID_CP = -664.181+8.484×DM (R² = 0.40), SID_Lys = 53.126+6.031×ether extract (EE)+0.893×thousand-kernel volume (R² = 0.66), SID_Thr = 39.916+7.843×EE (R² = 0.41), and SID_Trp = -361.588+4.891×DM+0.387×total starch (R² = 0.85). Conclusion: Overall, a great variation exists among 10 sources of brown rice, and the thousand-grain volume, DM, EE, and total starch can be used as the key predictors for SID of CP and AA.

• Journal of Korean Medicine for Obesity Research
• /
• v.24 no.1
• /
• pp.87-93
• /
• 2024

Objectives: Obesity is a globally prevalent public health issue. Hence, there is a need for the development of safer and more effective anti-obesity drugs. Lythrum salicaria, a traditional medicinal herb used for centuries, has been reported to improve lipid metabolism and fat accumulation. It also has a low toxicity profile. Therefore, its potential as a functional ingredient in health functional foods needs to be evaluated. Methods: In this randomized, double-blind, placebo-controlled clinical trial, 90 participants will be randomly assigned to either the experimental or control group. Each subject will orally receive L. salicaria extract (1,350 mg/day) (500 mg L. salicaria+850 mg lactose as vehicle) or lactose (1,350 mg/day) as a hard capsule formula for 84 days (12 weeks). The primary outcome will be body fat mass (kg), which will be assessed using dual-energy x-ray absorptiometry (DXA) (performed only at visits 2 and 4). Secondary outcomes include body mass index, body weight, waist-to-hip ratio, body fat percentage (%) measured using DXA, lean body mass (kg) measured using DXA (assessed only at visits 2 and 4), lipids (total cholesterol, triglyceride, high-density lipoprotein cholesterol, and calculated low-density lipoprotein cholesterol), free fatty acid, high sensitivity C-reactive protein, adiponectin, and leptin. Conclusions: This protocol will be implemented after approval of Institutional Review Board of Pusan National University Korean Medicine Hospital (approval number: PNUKHIRB-2022-08-002) and registration with the Korean National Clinical Research Information Service (CRIS) (CRIS-KCT0008060). The results of this trial will provide potential of L. salicaria as a new anti-obesity functional food with fat-reducing effects and low toxicity.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.4
• /
• pp.7-18
• /
• 2024

Because of their mineral composition, tire chips have very low thermal conductivity compared with natural geomaterials, leading to the use of sand-tire rubber mixtures in thermally insulating applications. However, systematic studies evaluating factors affecting the thermal conductivity of sand-tire rubber mixtures have been very limited. Thus, this study investigated the thermal conductivity of sand-tire rubber mixtures with varying size ratios and tire chip fractions according to the degree of saturation (S). Specimens were prepared in insulated cells, and thermal needle probe tests were performed. In addition, the contact angle and solid surface free energy of sand-tire rubber mixtures were investigated. The results of this study revealed that the thermal conductivity decreased with increasing tire chip fraction but increased with increasing water content (or S). However, the trend of increasing thermal conductivity with S varied with the tire chip fraction, and the specimens with tire chip fraction > 0.4 clearly showed a delayed increase in thermal conductivity with increasing S. This reflected that hydrophobic particles (tire chip) affected the dependency of thermal conductivity on S because of the delayed formation of capillary water bridges, which served as additional thermal conduction paths with increased moisture content.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.4
• /
• pp.416-423
• /
• 2013

Germination is controlled by internal factors of seeds and external factors such as water, temperature and light. We investigated the relationship between germination characteristics of four waxy rice cultivars and patterns of water uptake, antioxidant enzymes and free soluble sugars during early imbibition. Seed viabilities by tetrazolium test of four different rice cultivars were higher than 95% and germination rates of the hulled rice seeds were on 95% average. However, germination rate of intact rice among four cultivars showed a big difference depending on temperature. Water uptake of hulled and intact rice seeds during imbibition reached a stationary phase at around 30% moisture content. Although rates of water uptake were faster in hulled rice and high temperature than intact rice and low temperature condition, difference of those among cultivars was greater under low temperature than high temperature. The time required for rice seeds to uptake 30% water was negatively correlated with percentage of germination, germination energy, germination speed and mean germination time. Guaiacol peroxidase activity at 24h of imbibition was correlated with germination energy and germination speed but not percentage of germination. Catalase activity, soluble protein and maltose concentration at 24h of imbibition were not correlated with characteristics of germination. These results suggest that a time required for rice seeds to uptake 30% of water significantly correlated with germination and guaiacol peroxidase activity during early imbibition plays an important role in initiation of germination.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.1
• /
• pp.49-56
• /
• 2000

In the present we.k, temperature dependence of oxygen diffusivity in the polyvinyl chloride (PVC) film $D_f$ formed on gold electrode was investigated using steady-state rotating disk electrode (RDE) technique and modulated electrohydrodynamic (EHD) impedance technique. Both the diffusion rate defined as the ratio of oxygen diffusivity in the PVC film to the film thickness $D_f/\delta_f$ and the time constant $\delta_f^2/D_f$ for oxygen diffusion through the PVC film were obtained from plot of the limiting current versus disk rotation speed and from filing the EHD impedance spectra experimentally measured to those theoretically calculated on the basis of the diffusion equation for mass transport through the non-conductive and porous film, respectively. By combining measured $D_f/\delta_f$ with $\delta_f^2/D_f$, we determined $\delta_f\;and\;D_f$ at room temperature separately. As temperature increased, it appeared that the $D_f$ value measured for the PVC film-covered gold RDE was enhanced more rapidly than that $D_s$ value in the solution measured for the PVC film-free gold RDE. This means that the pores glowing with increasing temperature act as effective diffusion paths within the film. The present in-situ steady-state and modulated EHD measurements prove to be effective for determining $\delta_f\;and\;D_f$, separately and at the same time the porosity of the PVC film at temperatures below glass temperature $T_g$ of the film.

• Korean Journal of Environmental Agriculture
• /
• v.32 no.3
• /
• pp.193-200
• /
• 2013

BACKGROUND: Plant factory system of an artificial light type using Light-Emitting Diodes (LEDs), fluorescent light, or metal halide lamp instead of sun light is an ultimated method for plant production without any pesticides regardless of seasonal changes. The plant factory is also completely isolated from outside environmental conditions such as a light, temperature, or humidity compared to conventional greenhouse. Light-environment control such as a quality or quantity in the plant factory system is essential for improving the growth and development of plant species. However, there was little report that the effects of various light qualities provided by LEDs on Ledebouriella seseloides growth under the plant factory system. METHODS AND RESULTS: Ledebouriella seseloides seedlings transplanted at urethane sponge were grown in the plant factory system of a horizontal type with LED artificial lights for 90 days. Yamazaki solution for hydroponic culture of the seedlings was regularly irrigated by the deep flow technique (DFT) system on the culture gutters. Electrical Conductivity (EC) and pH of the solution was recorded at 1.4 ds/m and 5.8 in average, respectively during the experimental period. Number of unfolded leaves, leaf length, shoot fresh and dry weight of the seedlings were three times measured in every 30 days after beginning of the experiment. Blue LEDs, red LEDs, and fluorescent lights inside the plant factory were used as light sources. Conventional fluorescent lamps were considered as a control. In all the treatment, light intensity was maintained at $100{\mu}mol/m^2/s$ on the culture bed. Fresh weight of the seedlings was 3.7 times greater in the treatment with the mixture radiation of fluorescent light and blue+red LEDs (1:3 in energy ratio; Treatment FLBR13) than in fluorescent light treatment (Treatment FL). In FLBR13 treatment, dry weight per seedling was two times greater than in FL or BR11 treatment of blue+red LEDs (1:3 in energy ratio; Treatment BR11) during the culture period. Increasing in number of unfolded leaves was also significantly affected by the FLBR13 treatment comparing with BR11 treatment. CONCLUSION(S): Hydroponic culture of Ledebouriella seseloides seedlings was successfully achieved in the plant factory system with mixture lights of blue, red LEDs and fluorescent lights. Shoot growth of the seedlings was significantly promoted by the FLBR13 with the mixture radiation of fluorescent light, blue, and red LEDs under 1:3 mixture ratio of blue and red LEDs during the experimental period compared to conventional light conditions.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.2
• /
• pp.131-146
• /
• 2014

High-resolution seismic profiles coupled with sediment sampling were analyzed to investigate the acoustic characters and distribution patterns of the late Holocene sediments in Gamak Bay of the South Sea, Korea. The mean grain size of surficial sediment lies around $6.3{\sim}9.7{\Phi}$. Sediments in the bay consist of silt and clay with progressive decrease toward the inner bay. The seismic sedimentary sequence overlying the acoustic basement can be divided into two sedimentary units (GB I and II) by a prominent mid-reflector (Maximum Flooding Surface; MFS). The acoustic basement occurs at the depth between 20 m and 40 m below the sea-level and deepens gradually southward. The GB I, mostly occupying the channel-fill, is characterized by reflection-free seismic facies. It can be formed as late Transgressive System Tract (TST), interpreted tidal environment deposits. MFS appears at the depth of about 15~28 m below the sea-level and is well defined by even and continuous reflectors on the seismic profile. The GB II overlying MFS is composed of acoustically transparent to semitransparent and parallel internal reflectors. GB II is interpreted as the Highstand System Tract (HST) probably deposited during the last 6,000 yrs when the sea level was close to the present level. Especially, it is though that the GB II was subdivided into two layers (GB II-a and II-b) by a HST-reflector and this was classified by wind, sea water flux, and tidal current.

• Environmental and Resource Economics Review
• /
• v.14 no.4
• /
• pp.817-838
• /
• 2005

In this paper, the resource adequacy as well as the optimum fuel mix is obtained by the following procedures. First, the regulation body, the government agency, determine the reliability index as well as the optimum portfolio of the fuel mix during the planning horizon. Here, the resources with the characteristics of public goods such as demand-side management, renewable resources are assigned in advance. Also, the optimum portfolio is determined by reflecting the economics, environmental characteristics, public acceptance, regional supply and demand, etc. Second, the government announces the required amount of each fuel-type new resources during the planning horizon and the market participants bid to the government based on their own estimated fixed cost. Here, the government announces the winners of the each auction by plant type and the guaranteed fixed cost is determined by the marginal auction price by plant type. Third, the energy market is run and the surplus of each plant except their cost (guaranteed fixed cost and operating cost) is withdrew by the regulatory body. Here, to induce the generators to reduce their operating cost some incentives for each generator is given based on their performance. The performance is determined by the mechanism of the performance-based regulation (PBR). Here the free-riding performance should be subtracted to guarantee the transparent competition. Although the suggested mechanism looks like very regulated one, it provides two mechanism of the competition. That is, one is in the resource construction auction and the other is in the energy spot market. Also the advantages of the proposed method are it guarantee the proper resource adequacy as well as the desired fuel mix. However, this mechanism should be sustained during the transient period of the deregulation only. Therefore, generation resource planning procedure and market mechanisms are suggested to minimize possible stranded costs.

• Journal of Yeungnam Medical Science
• /
• v.3 no.1
• /
• pp.269-278
• /
• 1986

The purpose of this study was to know the effect of shourt termed fasting on the usage of metabolic energy sources and the metabolic differences between non-athletic and athletic subjects. Subjects were divided into non-athletic and athletic group and exercise was loaded on both groups after feeding and fasting. Exercise was loaded by a treadmill running at the speed of 8km/hour for 30 minutes in both groups. The experiment yielded following results. In the fed state, the level of plasma FFA increased markedly after 15 and 30 minutes of exercise compared with it's level of pre-exercise period in both groups. In the fasted state, the level of plasma FFA in non-athletic group increased steadily according to the duration of exercise, while it's level in athletic group showed no changes. At pre-exercise period, the level of plasma FFA was higher in fasted state than fed state. Immediately before the exercise and 15 and 30 minutes after the exercise, blood for the determination of plasma free fatty acid(FFA), glucose, triglyceride(TG)and cholesterol was sampled from antecubital vein, and simultaneously heart rate was measured. In the fed state, the level of plasma glucose was increased mildly according to exercise, and in the fasted state it's level increased according to exercise in both groups also. In the fasted state, the level of plasma TG was lower than that in the fed state. The level of plasma TG and cholesterol in the fed state was no changed by the exercise from the pre-exercise period. The level of plasma cholesterol in athletic group had tendency to lower than that in non-athletic group. Heart rate increased markedly according to exercise in both groups, but the athletic group's increasing rate of heart rate was lower than the non-athletic group's heart rate increased according to exercise and athletic groups heart rate increased early period of exercise, but did not change during lates post-period of exercise.