• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2262-2267
• /
• 2008

In this paper, drying mechanism is analyzed for improving the energy efficiency of an electric clothes dryer which consumes more electric power than other appliances. For the purpose, characteristic curves of the dryer such as temperature, relative humidity, evaporation rate, mass transfer coefficient, remaining moisture content curves are experimentally obtained. Based on the experimental results and analysis of drying mechanism, the effect of power of a heater and heat loss on the power consumption of an electric clothes dryer are systematically presented. These results demonstrate the feasibility of controlling heat loss at the heater as well as backduct component to decrease the power consumption of an electric clothes dryer.

• Journal of Welding and Joining
• /
• v.13 no.2
• /
• pp.115-121
• /
• 1995

As the metal transfer in the GMAW process affects the weld quality and productivity, the mechanism of molten formation and detachment has been investigated at various welding conditions. The force balance and pinch instability models have been widely used to analyze the metal transfer in the globular and spray modes, respectively A new approach is proposed in this work by minimizing the energy of molten drop system. Effects of the surface tension, gravity, electromagnetic and drag forces are considered with no presumed molten drop geometry. Effects of various welding conditions on the metal transfer are explained. The results show that the proposed mode can be applied to the globular and spray transfer modes. When compared with other models, results of the proposed model show better agreements with the available experimental data, which demonstrates the validity of the present model.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1069-1074
• /
• 2004

This study investigated the effect of pressure variations on augmentation of heat transfer when the ultrasonic waves were applied. The augmentation ratio of heat transfer was experimentally investigated and was compared with the profiles of pressure distributions calculated applying a coupled finite element-boundary element method (coupled FE-BEM). As the ultrasonic intensities increase from 70W to 340W, the velocity of the liquid paraffin is found to increase as well as kinetic energy, This physical behavior known as quasi-Eckart streaming results from acoustic pressure variations in the liquid. Especially, the higher acoustic pressure distribution near two ultrasonic transducers develops more intensive flow (quasi-Eckart streaming), destroying the flow instability. Also, the profile of acoustic pressure variation is consistent with that of augmentation of heat transfer. This mechanism is believed to increase the ratio of hear transfer coefficient.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.962-966
• /
• 2004

Suction transfer system with air suctioning is widely used and continuously developed in production automation. Air suctioning has some drawbacks in use. To generate vacuum in the suction cup with air suctioning, complex of mechanical component like as air compressor, air tube, air value is need, and it needs continuous air supply. And if the failure of the suction in a cup in the multi-suction cup system which is generally used occurs then the suctions of all of the cup will be fail. To overcome these drawbacks, new suction mechanism which uses permanent magnet for the movement of the suction cup is proposed. The proposed mechanism activates each suction cup separately, so the air leakage of a cup is not critical. The proposed suction system wasdesigned and fabricated in real world. With some experiments, the usability and performance of the suction mechanism was proved. The strong points of the proposed suction mechanism are simple structure, high energy efficiency, and discrete energy supply.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.1165-1169
• /
• 2012

The fluorescence intensity of DNA-intercalated ethidium with [ethidium]/[DNA base] being 0.005 was quenched upon the binding of another intercalating ligand, meso-tetrakis(N-methylpyridinium-4-yl)porphyrin (TMPyP). Addition of $Ca^{2+}$ enhanced the quenching efficiency. The range of separations between donor and acceptor molecules, within which total quenching occurs, was calculated using a one-dimensional resonance energy transfer mechanism to be 9.5 base-pairs or $32.3{\AA}$ in the absence of $Ca^{2+}$ ions. The distance increased to 18.7 base-pairs or about $63.6{\AA}$ in the presence $100{\mu}M$ $Ca^{2+}$. Considering that (1) $Ca^{2+}$ had little effect on the binding modes of ethidium and TMPyP, which was investigated by reduced linear dichroism and (2) spectral overlap between the emission spectrum of ethidium and the absorption spectrum of TMPyP was maintained in the presence of $Ca^{2+}$, contributions from orientation factor and spectral overlap to $Ca^{2+}$-induced enhancement in DNA mediated energy transfer was limited. Although there is no direct evidence, electron transfer along the DNA stem may accompany the observed fluorescence quenching. In this respect, DNA bound $Ca^{2+}$ act as a partially conducting medium.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.636-640
• /
• 2012

We modify ZnO nanorods with Zn-porphyrin to obtain the improved characteristics of energy transfer, which is further investigated for the applicability to photovoltaic devices. A nitrogen heterocyclic ligand containing a thiol group is covalently grafted onto the surface of finely structured ZnO nanorods with a length of 50-250 nm and a diameter of 15-20 nm. Zn-porphyrin is then attached to the ligand molecules by the mechanism of metalligand axial coordination. The resulting energy band diagram suggests that the porphyrin-modified ZnO nanorods might provide an efficient pathway for energy transfer upon being applied to photovoltaic devices.

• Nuclear Engineering and Technology
• /
• v.43 no.3
• /
• pp.217-242
• /
• 2011

A variety of Generation III/III+ water-cooled reactor designs featuring enhanced safety and improved economics are being proposed by nuclear power industries around the world in efforts to solve the future energy supply shortfall. Thermal-hydraulics is recognized as a key scientific subject in the development of innovative reactor systems. Phase change by boiling and condensation in the reverse process is a highly efficient heat transport mechanism that accommodates large heat fluxes with relatively small driving temperature differences. This mode of heat transfer is encountered in a wide spectrum of nuclear systems,and thus it is necessary to determine the thermal limit of water-cooled nuclear energy conversion in terms of economic and safety. Such applications are being advanced with the introduction of new technologies such as nanotechnology. Here, we investigated newly-introduced nanotechnologies relevant to boiling and condensation in general engineering applications. We also evaluated the potential linkage between such new advancements and nuclear applications in terms of advanced nuclear thermal-hydraulics.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.08a
• /
• pp.212-218
• /
• 2003

In order to analyze the heat transfer phenomena in the plasma flames, a mathematical model describing heat and fluid flow in an electric arc has been developed and used to predict heat transfer from the arc to the steel bath in a DC Electric Arc Furnace. The arc model takes the separate contributions to the heat transfer from each involved mechanism into account, i.e. radiation, convection and energy transported by electrons. The finite volume method and a SIMPLE algorithm are used for solving the governing MHD equations, i.e., conservation equations of mass, momentum, and energy together with the equations describing a $\kappa-\epsilon$ model for turbulence. The model predicts heat transfer for different currents and arc lengths. Finally these calculation results can be used as a useful insight into plasma phenomena of the industrial-scale electric arc furnace. From these results, it can be concluded that higher arc current and longer arc length give high heat transfer.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.1329-1332
• /
• 2014

The kinetic studies on the reactions of O,O-diethyl Z-S-aryl phosphorothioates with X-pyridines have been carried out in dimethyl sulfoxide. The free energy correlations with X in the nucleophiles are biphasic concave upwards with a break point at X = H, while those for substituent Z variations in the leaving groups are linear. The negative sign of ${\rho}_{XZ}$ implies that the reaction proceeds through a concerted mechanism for both the strongly and weakly basic pyridines. The biphasic concave upward free energy relationships with X are rationalized by a change in the nucleophilic attacking direction from frontside with the strongly basic pyridines to backside with the weakly basic pyridines.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.1016-1022
• /
• 2014

The kinetic studies on the reactions of O-methyl N,N-diisopropylamino phosphonochloridothioate with X-anilines and X-pyridines have been carried out in acetonitrile. The free energy relationship with X in the anilines exhibits biphasic concave upwards with a break region between X = (H and 4-F), giving unusual negative ${\beta}_X$ and positive ${\rho}_X$ values with weakly basic anilines. The unusual phenomenon is rationalized by isokinetic relationship. A stepwise mechanism with a rate-limiting leaving group departure from the intermediate is proposed based on the selectivity parameter and variation trend of the deuterium kinetic isotope effects with X. The free energy relationship with X in the pyridines exhibits biphasic concave upwards with a break point at X = 3-MeO. A concerted mechanism is proposed based on relatively small ${\beta}_X$ value, and frontside and backside nucleophilic attack are proposed with strongly and weakly basic pyridines, respectively.