• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.04a
• /
• pp.393-398
• /
• 2008

The environment is the important resource to use as well as to conserve for the development. Since 1990s, it has accentuated the importance of the environment and tried to conserve the environment in many areas. Among many area, the building industry has played a role to destruct the environment for providing the living decent space and brought the environmental affect. Therefore, the building industry should endeavor to mitigate the environmental affect. In building life cycle, it consumes the energy and natural resources. But it is difficult to evaluate the environmental affect during the whole building life. It is impossible to calculate the environmental affect without the much time and effort. Therefore. it requires the easy and handing program to calculate the affect to environment in each building life cycle. Until now, many program for assessing the affect to the environment have been developed and limitedly used because of the assessment scope and contents. In this paper, it aimed at developing the assessment program of LCA, focused on the energy consumption and carbon-dioxide emission compared with the domestic and foreign concerned programs. The developed program is divided into 3 areas; construction, maintenance, demolition.

• KIEAE Journal
• /
• v.13 no.4
• /
• pp.33-41
• /
• 2013

The impervious area on the surface of urban area has been increased as buildings and artificial land cover have continually been increased. Urban development has gradually decreased the green zone in downtown and alienated the city from the natural environment on outskirt area devastating the natural ecosystem. There arise the environmental problems to urban area including urban heat island phenomenon, urban flood, air pollution and urban desertification. As one of urban plans to solve such problems, green roof system is attracting attentions. The purpose of this study was to investigate flood discharge and heat reduction effect according to the green roof system and to quantify effect by analyzing through simulation water and heat cycle before and after green roof system. For the analysis, Distributed hydrologic model, WEP (Water and Energy transfer Processes) and WEP+ model were used. WEP was developed by Dr. Jia, the Public Works Research Institute in Japan (Jia et al., 2005), which can simulate water and heat cycle of an urban area with complex land uses including calculation of spatial and temporal distributions of water and heat cycle components. The WEP+ is a visualization and analysis system for the WEP model developed by Korea Institute of Construction Technology (KICT).

• International journal of advanced smart convergence
• /
• v.7 no.1
• /
• pp.42-47
• /
• 2018

Recently, as the demand for limited resources continues to rise and problems of resource depletion rise worldwide, the importance of renewable energy is gradually increasing. In order to solve these problems, various methods such as energy conservation and alternative energy development have been suggested, and biogas, which can utilize the gas produced from biomass as fuel, is also receiving attention as the next generation of innovative renewable energy. New and renewable energy using biogas is an energy production method that is expected to be possible in large scale because it can supply energy with high efficiency in compliance with energy supply method of recycling conventional resources. In order to more efficiently produce and manage these biogas, a biogas plant has emerged. In recent years, a large number of biogas plants have been installed and operated in various locations. Organic wastes corresponding to biogas production resources in a biogas plant exist in a wide variety of types, and each of the incoming raw materials is processed in different processes. Because such a process is required, the case where the biogas plant process is inefficiently operated is continuously occurring, and the economic cost consumed for the operation of the biogas production relative to the generated biogas production is further increased. In order to solve such problems, various attempts such as process analysis and feedback based on the feedstock have been continued but it is a passive method and very limited to operate a medium/large scale biogas plant. In this paper, we propose "CNN-based production yield prediction algorithm for increasing process efficiency of biogas plant" for efficient operation of biogas plant process. Based on CNN-based production yield forecasting, which is one of the deep-leaning technologies, it enables mechanical analysis of the process operation process and provides a solution for optimal process operation due to process-related accumulated data analyzed by the automated process.

• ETRI Journal
• /
• v.37 no.2
• /
• pp.380-386
• /
• 2015

Guaranteeing quality of service over a multihop wireless network is difficult because end-to-end (ETE) delay is accumulated at each hop in a multihop flow. Recently, research has been conducted on network coding (NC) schemes as an alternative mechanism to significantly increase the utilization of valuable resources in multihop wireless networks. This paper proposes a new section-based joint NC and scheduling scheme that can reduce ETE delay and enhance resource efficiency in a multihop wireless network. Next, this paper derives the average ETE delay of the proposed scheme and simulates a TDMA network where the proposed scheme is deployed. Finally, this paper compares the performance of the proposed scheme with that of the conventional sequential scheduling scheme. From the performance analysis and simulation results, the proposed scheme gives more delay-and energy-efficient slot assignments even if the NC operation is applied, resulting in a use of fewer network resources and a reduction in ETE delay.

• Journal of Climate Change Research
• /
• v.3 no.2
• /
• pp.143-151
• /
• 2012

This study analyzes United Nations Framework Convention on Climate Change and domestic-foreign support policy for renewable, also confirms the need for sound and sustainable development to minimize adverse impacts on the environment. Main source of greenhouse gas emissions leading to global warming needs to be resolved through the introduction of renewable energy system by developing low-carbon city. Case studies show the directions for practical response to climate change on the basis of introduction of renewable energy. This case studies can be served as the base model that reduces greenhouse gases with the introduction of renewable energy facilities in the new land development project and obtains economic benefits from CDM project.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.4
• /
• pp.201-212
• /
• 2016

A Wind resource assessment and optimal micrositing of wind turbines were implemented for the development of an onshore wind farm of 30 MW capacity on Gadeok Island in Busan, Republic of Korea. The wind data measured by the automatic weather system (AWS) that was installed and operated in the candidate area were used, and a reliability investigation was conducted through a data quality check. The AWS data were measured for one year, and were corrected for the long term of 30 years by using the modern era retrospective analysis for research and application (MERRA) reanalysis data and a measure- correlate-predict (MCP) technique; the corrected data were used for the optimal micrositing of the wind turbines. The micrositing of the 3 MW wind turbines was conducted under 25 conditions, then the best-optimized layout was analyzed with a various wake model. When the optimization was complete, the estimated park efficiency and capacity factor were from 97.6 to 98.7 and from 37.9 to 38.3, respectively. Furthermore, the annual energy production (AEP), including wake losses, was estimated to be from 99,598.4 MWh to 100,732.9 MWh, and the area was confirmed as a highly economical location for development of a wind farm.

• Journal of Environmental Science International
• /
• v.19 no.11
• /
• pp.1397-1405
• /
• 2010

Mass mortalities of cultivated organisms have occurred frequently in Korean coastal waters causing enormous losses to cultivating industry. The preventive measures require continuous observation of farm environment and real-time provision of data. However, line hanging aquaculture farm are generally located far from monitoring buoys and has limitations on installation of heavy equipments. Substituting battery pack for solar panels and miniaturizing size of buoy, newly developed system can be attached to long line hanging aquaculture farm. This system could deliver measured data to users in real-time and contribute to damage mitigation and prevention from mass mortalities as well as finding their causes. The system was installed off Gijang and Yeongdeck in Korea, measuring and transmitting seawater temperature at the sea surface every 30 minutes. Short term variation of seawater temperature, less than one day, in Gijang from June to July 2009 corresponded tidal period of about 12 hours and long term variation seemed to be caused by cold water southeast coast of Korea, particularly northeast of Gijang. Seawater temperature differences between Gijang station and the other station that is about 500 m away from Gijang station were $1^{\circ}C$ on average. This fact indicates that it is need to be pay attention to use substitute data even if it is close to the station. Daily range of seawater temperature, one of crucial information to aquaculture, can be obtained from this system because temperature were measured every 30 minutes. Averages of daily range of temperature off Gijang and Yeongdeok during each observation periods were about $2.9^{\circ}C$ and $4.7^{\circ}C$ respectively. Dominant period of seawater temperature variation off Yeongdeok was one day with the lowest peak at 5 a.m. and the highest one at 5 p.m. generally, resulting from solar radiation.

• Journal of Biosystems Engineering
• /
• v.30 no.6 s.113
• /
• pp.354-359
• /
• 2005

This is a fundamental study to develop a bio-gas utilization technology using livestock manure. Especially, this study was carried out to develop an engine using bio-gas. A bio-gas engine was designed and manufactured by modification of a diesel engine of 3 cylinders powering 13.31 kW/2800 rpm, changing the fuel supplying system fit for bio-gas. The result showed that, when the Air/Fuel ratio was controlled with fixed spark timing, the power of biogas-fueled engine is about $10.6{\~}14.6\%$ lower then that of LNG-fueled engine because of low volumetric efficiency. The engine output and torque was $11.85{\~}13.3$ kW, $39.5{\~}40.8\;N{\cdot}m$, respectively at the engine speed of 2600 rpm. Bio-gas consumption rate was 260.20 g/kW/hr, 315.20 g/kW/hr in engine speed or 1000 rpm, 2800 rpm, respectively.

• International Area Studies Review
• /
• v.14 no.1
• /
• pp.77-97
• /
• 2010

Recently, countries on the Caspian Sea were had heavily interested due to instability of international resource market. These countries having been developed basing on energy exports, especially Kazakhstan have drastically grown during a decades. However economy, heavily relied on the exports of energy, is influenced on fluctuation in the international energy price as well as sometimes exposed at Dutch disease. These days, Kazakhstan, increased trade and investment with Korea, has been on the rise as new supplier for energy. Therefore, economic change in Kazakhstan can be an important issue. In this paper, we analyze relations among oil price, interest rate, and real exchange rate during sample period from January 1999 to December 2008 expanding Balasa-Samuelson model. Empirical results present that oil price, interest rate, and real exchange rate mutually keep their balance. Eventually, we find out Kazakhstan has exposed at Dutch disease since oil price and interest rate have negative impacts on real exchange rate respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.196-206
• /
• 2012

AESA radar is able to instantaneously and adaptively position and control the beam, and such adaptive beam pointing of AESA radar enables to remarkably improve the multi-mission capability, compared with mechanically scanned array radar. AESA radar brings a new challenges, radar resource management(RRM), which is a technique efficiently allocating finite resources, such as energy and time to each task in an optimal and intelligent way. Especially radar beam scheduling is the most critical component for the success of RRM. In this paper, we proposed stochastic radar beam scheduling algorithm using simulated annealing(SA), and evaluated the performance on the multi-function radar scenario. As a result, we showed that our proposed algorithm is superior to previous dispatching rule based scheduling algorithm from the viewpoint of beam processing latency and the number of scheduled beams, with real time capability.