• Journal of Korean Home Economics Education Association
• /
• v.31 no.3
• /
• pp.179-192
• /
• 2019

This study was performed to analyze the contents of food intake in middle school Home Economics textbook and the trends of food intake of middle school students in Korea to figure out the education direction of food intake. The contents of food intake were analyzed in major three kinds of middle school Home Economics textbook according to 2015 curriculum and the trends of food and nutrient intake were analyzed in 2,543 subjects aged 13 to 15 years using 2007~2015 Korea National Health and Nutrition Examination survey by logistic regression analysis or Pearson correlation coefficient. As a result, contents of food intake of textbook included food source of nutrient, food group name, necessity of eating diverse foods, recommended daily eating frequency of food group and menu planning according to meal composition guideline, however food intake trends were not included. Consumption of grains and grain products was increased until 2007 to 2010 year and was decreased after 2011 year(p=0.0012). Sugars and sweets, beverages and alcohols, and fish and shellfish consumption were increased during 2007~2015 year(p<0.0001). Carbohydrate, fat, vitamin A, thiamin and iron intakes were increased(p=0.0052), and energy ratio by carbohydrate was decreased(p=0.0009) and energy ratio by fat was increased(p<0.0001) during 2007~2015 year. Mean ratios of nutrient intake compared to the dietary reference intakes for Koreans were very low in dietary fiber(19-27%) and calcium(46-56%), but was higher in sodium(221-289%)(p<0.0001) regardless of year. There was a significant positive correlation between most food group intakes except sugars and sweets, bean and bean products, nuts and seeds, seaweeds, and beverages and alcohols and energy, protein, dietary fiber, vitamin A, riboflavin, calcium and iron intakes(p=0.0375). In the above, during the period from 2007 to 2015 year, intakes of sugars and sweets, beverages and alcohols, and fish and shellfish were increased, and intakes of dietary fiber and calcium were low and energy ratio by fat was increased, thus these trends are concerned to threaten nutritional balance and health of subjects. Therefore, Home Economics textbook of middle school needs to include food intake trends of adolescents with basic concepts to help them maintain balanced diet in the rapid change of food intake patterns for maintaining optimal nutrition and health.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.147-158
• /
• 2008

In this study, fermentation characteristics of waste agricultural and forest biomass for production of heat energy were focused to be used in agricultural farm households. The purpose of this study was focused on seeking practical utilization of agricultural and forest biomass wastes in agricultural farm households in the form of thermal energy by means of simple fermentation process. Fermentation process was performed in terms of different raw-materials and their mixture with different ratios. Urea, lime, and bioaids were added as fermenting aids. Moisture contents of fermenting substrates were adjusted to 55~65%. In order to optimize the fermentation process various factors, such as raw-materials, moisture contents, amount of fermenting aids, and practical measurement of hot-water temperature during fermentation were carefully investigated. The optimum condition of fermenting process were obtained from hardwood only and hardwood: softwood (50 : 50) beds. In case of hardwood only the highest temperature was recorded between 60 to $90^{\circ}C$ the lowest temperature was determined to more or less $40^{\circ}C$ and the average temperature was ranged to $50{\sim}60^{\circ}C$ and this temperature ranges were maintained up to 20~30 days. The optimum amount of additives were estimated to ca. 15 kg of urea, 20 kg of bioaids, and 10 kg of lime for 1 ton of substrate. To reach the highest temperature the optimum moisture content of fermenting substrate was proved to 55% among three moisture content treatments of 45%, 55% and 65%. The temperature of hot-water tank installed in fermenting bed of hardwood : grass (50 : 50) showed very different patterns according to measuring positions. In general, temperatures in the mid- and upper-parts of substrate piling were relative higher than lower and surface parts during 45-day fermentation process. The maximum temperature of fermenting stage was determined to $65^{\circ}C$, minimum temperature, more or less $40^{\circ}C$, and average temperature was $60^{\circ}C$. The water temperature of tank exit was ranged to $33{\sim}48^{\circ}C$ during whole measuring periods. It could be concluded that fermentation process of waste agricultural and forest biomass produces a considerable amounts of heat, averaging about $50{\sim}60^{\circ}C$ for maximum 3 months by using the heat exchanger (HX-helical type).

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.3
• /
• pp.278-285
• /
• 2008

This research was performed to evaluate the landfilling method of organic sludge from mix of pre-treated organic sludge (OS) and municipal solid waste(MSW). Organic sludges were dried, composted, and solidified as pre-treatment and the OS and MSW were mixed in ratios of 2 to 8 and 4 to 6. Approximately 1,800$\sim$2,500 L of landfill gas(LFG) was generated in the lysimeter with solidified-OS, which was higher than 1,150$\sim$1,650 L of the dried- and composted- ones. Maximum H$_2$S concentration was found in the following order : Composted-20(80 ppmv) > Composted-40(55 ppmv) > Dried-20(30 ppmv) > Dried-40 $\fallingdotseq$ Solidified-20 $\fallingdotseq$ Solidified-40 (20 ppmv). BOD$_5$ at initial leachate generation period was 38,000 mg/L for Composted-40, 28,000 mg/L for Dried-40, 26,000 mg/L for Dried-20, 21,000 mg/L for Composted-20 and Solidified-40, and Solidified-20 for 17,000 mg/L. In the final period of experiment, BOD$_5$ was low as 300$\sim$500 mg/L in the lysimeter with solidified-OS and MSW and showed 2,000$\sim$3,500 mg/L in dried- and composted- ones. As the results, landfilling by mix of solidified-OS and MSW was evaluated as the most appropriate method for biodegradable organics. Direct landfilling of OS is permitted for landfill site with CDM facility. Therefore, mixed landfilling of solidified-OS and MSW should be considered for much more LFG generation as methane.

• Journal of Nutrition and Health
• /
• v.41 no.8
• /
• pp.754-766
• /
• 2008

This study was performed to evaluate the effect of nutrient intake levels on the relative risk of breast cancer in the Daegu and Gyeongbuk area. The case subjects were 103 patients newly diagnosed as breast cancer at Kyungpook National University Hospital. The control subjects were 159 healthy women without breast cancer-related disease in the same community selected by frequency matching of age and menopausal status. The survey was administered by individual interviews by trained dietitians using semiquantitative food frequency questionnaires. The odds ratios were determined by using unconditional logistic regression after adjusting for the confounding factors found in the analysis of general characteristics of the subjects. In overall, it has been found that high consumptions of energy and carbohydrates significantly raised the relative risk of breast cancer, and that high intakes of total fat, plant fat, dietary fiber, all kinds of fatty acids, vitamin E and calcium significantly lowered the risk of breast cancer. The results of the study suggest that the possible protective factors to the breast cancer risk include a higher intakes of total fat, especially plant fat, dietary fiber, and micronutrients such as vitamin E, folic acid, calcium, phosphorus and potassium. On the other hand, high intakes of energy and carbohydrate appeared to be the risk factors.

• Journal of Nutrition and Health
• /
• v.52 no.1
• /
• pp.47-57
• /
• 2019

Purpose: This study was conducted to investigate the relationship between atopic dermatitis and dietary fat and fatty acid (FA) intakes in 9 ~ 11 year old children. Methods: We analyzed data from the combined 2013 ~ 2015 KNHANES (Korean National Health and Nutrition Examination Survey). Subjects were divided into two groups according to atopic dermatitis (AD); with AD and without AD. Data pertaining to macronutrients and FA intakes were obtained by a single 24-h dietary recall. Food sources were identified based on the amounts of total fat and FA consumption according to each food. The associations between each FA intake and atopic dermatitis were analyzed using simple and multiple logistic regression analyses. Age, sex, body mass index (BMI) and income levels were adjusted as covariates. Results: Of the participants, 17.69% suffered from atopic dermatitis. Children with AD had significantly lower fat percentages of total energy and higher carbohydrate percentages of total energy than normal children. Percentages of energy and intakes of polyunsaturated fatty acid (PUFA), n-3 FA and n-6 FA in children with AD were significantly lower than those in normal children. In the FA, linoleic acid, ${\gamma}$-linoleic acid and ${\alpha}$-linolenic acid levels of children with AD were significantly lower than those of normal children. However, the P/S ratio and n-6/n-3 ratio did not differ significantly between children with AD and normal children. Soybean oil was the main contributor to PUFA, n-3 FA and n-6 FA in both groups, while perilla seed oil and mackerel were the major food sources of n-3 FA in children with atopic dermatitis. Atopic dermatitis was significantly correlated with low-fat and high-carbohydrate diets. The adjusted odds ratios were 0.966, 0.776 and 0.963 for PUFA, n-3 FA, and n-6 FA intakes, respectively. Conclusion: The present study provides reliable evidence regarding the relationship between fat and FA intakes and AD in Korean children 9 ~ 11 years of age.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.103-113
• /
• 2020

Jack-up drilling rigs are widely used in the offshore oil and gas exploration industry. Although originally designed for use in shallow waters, trends in the energy industry have led to a growing demand for their use in deep sea and harsh environmental conditions. To extend the operating range of jack-up units, their design must be based on reliable analysis while eliminating excessive conservatism. In current industrial practice, jack-up drilling rigs are designed using the working(or allowable) stress design (WSD) method. Recently, classifications have been developed for specific regulations based on the load and resistance factor design (LRFD) method, which emphasises the reliability of the methods. This statistical method utilises the concept of limit state design and uses factored loads and resistance factors to account for uncertainly in the loads and computed strength of the leg components in a jack-up drilling rig. The key differences between the LRFD method and the WSD method must be identified to enable appropriate use of the LRFD method for designing jack-up rigs. Therefore, the aim of this study is to compare and quantitatively investigate the differences between actual jack-up lattice leg structures, which are designed by the WSD and LRFD methods, and subject to different environmental load-to-dead-load ratios, thereby delineating the load-to-capacity ratios of rigs designed using theses methods under these different enviromental conditions. The comparative results are significantly advantageous in the leg design of jack-up rigs, and determine that the jack-up rigs designed using the WSD and LRFD methods with UC values differ by approximately 31 % with respect to the API-RP code basis. It can be observed that the LRFD design method is more advantageous to structure optimization compared to the WSD method.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.3
• /
• pp.36-44
• /
• 2007

The purpose of this study was to investigate thermal stability, reactivity, and bonding strength of existing epoxy resin mixed with the epoxidized soybean oil (ESBO) in order to use soybean oil economically. In the dry shear test, the marked strengths showed $30.5kgf/cm^2$ at the ratio of ESBO to epoxy resin 9 : 1 and $6.2kgf/cm^2$ at the ratio 8 : 2. The bonding strengths of the others, except mixing ratios 2 : 8 and 1 : 9, exceeded the requirement of Korean plywood standard of $7.0kgf/cm^2$. In the wet shear test, the result was $5.8kgf/cm^2$ at the ratio 9 : 1. There were no thickness swelling and moisture absorption in the water resistance of the film. The value of activation energy, Tg (${\Delta}E$), by DSC analysis showed between $110^{\circ}C$ and $120^{\circ}C$ through all ratios. Epoxy in the epoxy resin fully reacted with the hardener (TETA), but it is difficult to decide that epoxys in the ESBO were reacted directly with the hardener from FT-IR analysis. As the mixing ratio of ESBO increased, the thermal stabilities dropped from TGA analysis. From the comprehensive view on the results of above experiments, it could be confirmed through experiments that the ESBO in the mixed adhesive of epoxy resin/ESBO played a role as an extending agent level of epoxy adhesive, and we were able to know that in order to utilize ESBO as an adhesive, a study should be performed on the condition of hardening, inducible of the hardening reaction.

• Applied Chemistry for Engineering
• /
• v.21 no.2
• /
• pp.217-223
• /
• 2010

In general, fiber-reinforced plastics (FRP) wastes are simply buried or burned. Landfill brings about a permanent contamination of soil due to the inability of FRP to decompose and incineration causes an issue of generating toxic gases and dusts. There have been several ways to treat the FRP wastes such as landfill, incineration, chemical recycling, material recycling and the utilization of energy from combustion. Most methods excluding material recycling are known to have critical limitations in economic, technical and environmental manners. However it is known that material recycling is most desirable among the methods handling FRP wastes. In this study, to investigate the purpose of feasibility of material recycling, various bulk molding compound (BMC) specimens were prepared with the various contents of unsaturated polyester resin binder (25, 30, 35 wt%) and the various replacement ratios of FRP wastes powder (0, 25, 50, 75, 100 wt%) substituted for filler. To evaluate the physical properties BMC specimens, various tests such as tensile strength, flexural strength, impact strength, hot water resistance and SEM imaging were conducted. As a results, mechanical strengths decreased with an increase of replacement ratio of FRP waste powder and physical properties of BMC specimens were deteriorated in the hot water resistance. The fluidity of BMC with more than 50 wt% of the replacement ratio of FRP wastes powder decreased remarkably, causing a problem in the BMC composite.

• Journal of Fashion Business
• /
• v.13 no.6
• /
• pp.125-136
• /
• 2009

The main objective of this research was to understand the characteristics of complementary color scheme through the analysis of contemporary women's fashion color coordination as they appear in the 'Collections'. Data collection of 115 was done through review of 'pr$\hat{e}$t-$\grave{a}$-porter Collections' of four cities; Milan, London, New York, Paris. Statistical analysis of frequency and also qualitative interpretation of characteristics of complementary color harmony characteristics which appeared in four collections were completed. The main findings were as followed; (1) Only 115 complementary color schemes out of 4968 two color combinations appeared. Compared the comparative ratios of appearance frequency between the two color combination and the complementary color harmony, London showed the highest, and followed by New York, and Milan and Paris. (2)The combined color type of 'red+green' was the most frequently appeared, and followed by 'violet+yellow' and 'orange+blue'. For the type of tone harmony, the contrast tone showed the most, and followed by the similarity and identity. According to the type of complementary color combination, the type of tone harmony used differently. Some differences showed in the types of color harmony and tone harmony between collections. (3) The complementary color scheme which shown in four collections harmonized two opposite colors mainly through the strong tone contrast and this could cause tension along with interest in the image. The complementary colors intensified and brought out the attributes each other. More details, high contrast of two complementary colors of yellow and violet created a vibrant look especially when used at higher saturation. Sometimes, however, some tone variations of two hues neutralized the strong effect and sometimes enhanced each other. When they used in similarity tones or identity tones in light colors, the tension was reduced and became softened but still presented nice harmony. In the type of 'red+green' color harmony, the various color combinations were demonstrated, mostly through tone manipulation of green color. The similarity tone harmony, which used the most, could effect a better sense of harmony and present more sophisticated looks. When used in contrast tone harmony, some changes in its own color which have only one color of two the excessive intensity led a good harmony. The 'orange+blue' color harmony was shown the least and used three tone harmony almost the same ratio. In this color harmony, blue amplified its energy and brilliance of orange and seemed to work better when one color was at a lower intensity than the other. In harmony with a similarity and an identity tone, this color harmony produces a stable and calm image. (4) The complementary scheme appeared more frequently in the S/S collections than in A/W collections and showed some differences in the types of color harmony and tone harmony between seasons, however, no big differences between collections.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.2
• /
• pp.209-215
• /
• 2002

This study investigated the crystal growth, crystalline structure and the basic optical properties of $SnSe/BaF_2$ epilayers. The SnSe epilayer was grown on $BaF_2$(111) insulating substrates using a hot wall epitaxy(HWE) technique. It was found from the analysis of X-ray diffraction patterns that $SnSe/BaF_2$ epilayer was growing to single crystal with orthorhombic structure oriented [111] along the growth direction. Using Rutherford back scattering(RBS), the atomic ratios of the SnSe was found to be stoichiometric, almost 50 : 50. The best values for the full width at half maximum (FWHM) of the DCXRD was 163 arcsec for SnSe epilarer. The epilayer-thickness dependence of the FWHM of the DCXRD shows that the quality of the $SnSe/BaF_2$ is as expected. The dielectric function ${\varepsilon}$(E) of a semiconductor is closely related to its electronic energy band structure and such relation can be drawn from features around the critical points in the optical spectra. The real and imaginary parts(${\varepsilon}_1$ and ${\varepsilon}_2$) of the dielectric function ${\varepsilon}$ of SnSe were measured. These data are analyzed using a theoretical model known as the model dielectric function(MDF). The optical constants related to dielectric function such as the complex refractive index(n*-n+ik), absorption coefficient (${\alpha}$) and normal- incidence reflectivity (R) are also presented for $SnSe/BaF_2$.