• Journal of Sensor Science and Technology
• /
• v.11 no.5
• /
• pp.309-318
• /
• 2002

A stoichiometric mixture of evaporating materials for $CdIn_2S_4$ single crystal thin films was prepared from horizontal electric furnace. To obtain the single crystal thin films, $CdIn_2S_4$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperatures were $630^{\circ}C$ and $420^{\circ}C$, respectively. The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $CdIn_2S_4$ single crystal thin films measured with Hall effect by van der Pauw method are $9.01{\times}10^{16}\;cm^{-3}$ and $219\;cm^2/V{\cdot}s$ at 293 K, respectively. The temperature dependence of the energy band gap of the $CdIn_2S_4$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)=2.7116\;eV-(7.74{\times}10^{-4}\;eV)T^2/(T+434)$. The crystal field and the spin-orbit splitting energies for the valence band of the $CdIn_2S_4$ have been estimated to be 0.1291 eV and 0.0248 eV, respectively, by means of the photocurrent spectra and the Hopfield quasi cubic model. These results indicate that the splitting of the ${\Delta}so$ definitely exists in the ${\Gamma}5$ states of the valence band of the $AgInS_2$/GaAs epilayer. The three photocurrent peaks observed at 10K areascribed to the $A_1$-, $B_1$-, and C1-exciton peaks for n = 1.

• Journal of Nutrition and Health
• /
• v.35 no.3
• /
• pp.322-331
• /
• 2002

This study was carried out to evaluate the effect of vitamin $B_{6}$ intake by normal term delivery pregnant women on the concentration of vitamin $B_{6}$ in the material plasma, the umbilical cord plasma, and the placental tissue. Dietary intake data were obtained from a semi-quantitative frequency questionnaire. The daily mean energy and protein intakes were 2189.5 kcal (93.2% of RDA) and 79.3 g (113.3% of RDA), respectively. The average daily vitamin $B_{6}$ intake was 1.7 mg (91.4% of RDA) for the pregnant women. Their main sources of vitamin $B_{6}$ were cereal & starch (50%), and vegetables & fruits (33%). The pyridoxal phosphate (PLP) concentration of the maternal plasma, the umbilical cord plasma, and the placenta were 16.7 $\pm$ 4.1 nmol/1, 61.3 $\pm$ 19.8 nmol/l and 898.6 $\pm$ 159.2 ng/g, respectively. The PLP level was the highest in the placenta. The PLP level of the maternal plasma was significantly lower than the of the umbilical cord plasma (p < 0.001). The PLP level of maternal plasma correlated positively with that of the placenta (p < 0.0001) and the umbilical cord plasma (p < 0.05). Also the PLP level of the placenta correlated positively with that of the umbilical cord plasma (p < 0.05). These findings indicate that the vitamin $B_{6}$ nutritional status of the fetus is affected by placental vitamin $B_{6}$ levels, and that the placental vitamin B$_{6}$ levels reflect the maternal vitamin $B_{6}$ status. The umbilical cord plasma PLP level showed a positive correlation with the gestational length (p < 0.05). A negative association was observed between the PLP level showed of the umbilical cord plasma and the pregnancy weight gain (p < 0.03). The results suggest that the transfer of PLP from maternal plasma to the placental tissue could be an active transport, white the transfer of PLP from the placenta to the fetus is by means of simple diffusion. Thus, neonatal vitamin $B_{6}$ nutrition is influenced by the maternal nutritional status.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.7 no.1
• /
• pp.27-32
• /
• 2008

Purpose: To evaluate the clinical results of the patients who underwent radiofrequency thermal shrinkage (RFTS) for treatment of anterior cruciate ligament (ACL) laxity after ACL reconstruction. Material and Methods: From October 1999 to March 2006, we performed 133 cases of ACL reconstruction. Among them we experienced 16 patients who had the laxity of reconstructed ACL in second look arthroscopy. Mean follow-up was 20.4 months. Mean age was 33.5 years. 12 cases were male and 4 cases were female. The elongated ACL were treated by bipolar radiofrequency energy with an output of grade II. Subjective and objective parameters were utilized in analyses, such as: the mean range of motion, Lysholm knee score, Tegner activity score, Lachman test, IKDC score. Wilcoxon signed-rank test was used to perform the data analysis. P<0.05 was considered to be statistically significant. Results: Postoperative mean Lysholm knee score (preop: $82.2{\pm}5.2(77{\sim}85))$ (P=0.04), postop: $85.2{\pm}4.8$(82-90)) and anterior displacement by the Telos stress test (preop: $5.4{\pm}4.6(3{\sim}10)mm$, postop: $2.1{\pm}1.9(0{\sim}4)mm)$ (P=0.02), Lachman's test, and IKDC scores (P=0.04) demonstrated significant differences statistically compared to the preoperative. There were no statistical differences in mean range of motion, Tegner activity scale. Conclusions: Arthroscopic shrinkage for the ACL laxity after ACL reconstruction with radiofrequency device showed good clinical results and was applicable operative technique.

• Journal of Dairy Science and Biotechnology
• /
• v.16 no.2
• /
• pp.119-136
• /
• 1998

The lipids of milk provide energy and many essential nutrients for the newborn animal. They also have distinctive physical properties that affect the processing of dairy products. Milk fat globules mainly consist of neutral lipids like triacylglycerols, whereas the globule membranes contain the complex lipids mostly, Phospholipids are a small but important fraction of the milk lipids and are found mainly in the milk fat globule membrane and other membranous material in the skim-milk phase. The milk fats of ruminant animals are characterized by the presence of relatively high concentrations of short-chain fatty acids, especially butyric and hexanoic acids, which are rarely found in milks of non-ruminants. The fatty acids of milk lipids arise from de novo synthesis in the mammary gland and uptake from the circulating blood. The fatty acid compositions of milks are usually complex and distinctive, depending on the nature of the fatty acids synthesized de novo in the mammary gland and those received from the diet in each species. The content and composition of milks from different species vary widely; presumably, these are evolutionary adaptations to differing environments. The actual process by which these globules are formed is unkonwn, but there are indications that triglyceride-containing vesicles which bleb from endoplasmic reticulum may serve as nucleation sites for globules. Recent studies on milk have centred on the manipulation of milk lipids to increase specific fatty acids, i.e. 20-carbon omega-3 fatty acids (eicosapentaenoic acid 20:5n3, decosahexaenoic acid 22:6n3) from marine sources because the fatty acids are closely associated with a decreased risk of coronary heart disease.

• Korean Journal of Food Science and Technology
• /
• v.26 no.6
• /
• pp.670-678
• /
• 1994

The effects of amylase addition during extrusion cooking of rice on the physico-chemical properties of the extrudates were investigated in order to develop rice-based Korean style weaning food products. A laboratory-built single screw extruder was used, the enzymes used were Termamyl 120LS(amylase from Bacillus licheniformis, NOVO Co.), BAN 240L(amylase from Bacillus amylolichuefaciens, NOVO Co.) and malt powder. By the addition of enzymes, the water soluble index of the extrudates increased by 3 times compared to that of the extrudates without enzyme and the concentration of reducing sugar in the extrudates increased drastically at 28 feed moisture. The gel permeation chromatographic pattern showed that the large molecular starch fractions diminished by the addition of enzyme during extrusion and the low molecular fraction increased. The residual enzyme activity in the extrudate were 27% for the most thermo-resistance enzyme by treating at $140^{\circ}C$ in the metering section of the extruder. The sediment volume of the extrudate dispersion increased as the metering section temperature increased to $140^{\circ}C$ . By the addition of enzymes the viscosity of extrudate dispersion was redused $1/4{\sim}1/200$ of that of the extrudates without enzyme. It allowed to use 1.8 times of solid material to the weaning food formulation to attain the same level of consistency as the commercial products. It proves that the addition of amylase during rice extrusion is effective to increase the energy density of weaning food by starch degradation, which results in the increases of water solubility, reducing sugar content, dispersibility and fluidability.

• Korean Journal of Soil Science and Fertilizer
• /
• v.10 no.3
• /
• pp.135-151
• /
• 1977

The present paper summerizes the studies on clay mineralogical characteristics of Korean soil, relationship between potassium and clay minerals, potassium release pattern of clay minerals and utilization of clay minerals for soil conditioner and fertilizers, which have been carried out in this laboratory. 1. The red yellow podzolic soil is mostly abundant in the upland of Korea and mainly consists of halloysite and weathered intermediates of mica such as illite and vermiculite. 2. With regard to soil parent material, kaolin mineral occurs abundant in soils derived from granite and granite gneiss. Mica is dominant in basaltic soil. The main clay mineral of the soil, originated from the Tertiary, is found montmorillonite and the volcanic soil of Jeju Island has plenty of allophane as its main clay mineral. 3. It is confirmed that the soil fertility depends on the composition of clay minerals. The red yellow podzolic soil, containing lot of kaolin, shows low productivity while the montmorillonite soil has higher productivity. 4. The release rate of solid phase potassium (micas and fixed potassium) follows the 1st order reaction equation in the equilibrium solution of $IN-NH_4OAc$. The potassium release constant is positively correlated with the mica content of the clay but negatively correlated with the content of $14.5{\AA}$ minerals. On the other hand, the potassium release constant has very high correlation with the ratio(Kex/Kt) of exchangeable potassium(Kex) to total potassium(Kt). 5. It is also found that Kex/Kt has rather high correlation with the content of mica and $14.5{\AA}$ minerals existed in the clay as well as the mica content of the soil.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.580-587
• /
• 2017

Woodfiber insulation board can be considered as a one of the key material for low energy consumption, comfortable and safety construction of residential space because of its eco-friendly and high thermal insulation performance. This study was carried out to investigate the formaldehyde (HCHO) total volatile organic compounds (TVOC) emission properties and combustion shapes by flame test of low density fiberboards (LDFs) prepared with different adhesives. HCHO TVOC emission and combustion properties of LDFs prepared by melamine urea formaldehyde (MUF), phenol formaldehyde (PF), emulsified methylene diphenyl diisocyanate (eMDI) and latex resin adhesives were measured by desiccator method, 20 L chamber method, and flame test, respectively. As results, LDFs manufactured by MUF, eMDI and latex resin adhesives satisfied the Super $E_0$ grade of HCHO emission performance except PF resin. Furthermore, TVOC emission of all LDFs were satisfied the Korean indoor air quality standard (below $400{\mu}g/m^2{\cdot}h$). Especially, LDF with eMDI resin adhesive showed the lowest HCHO and TVOC emissivity, that $0.14mg/{\ell}$, $12{\mu}g/m^2{\cdot}h$, respectively. However, eMDI emitted the small amount ($3{\mu}g/m^2{\cdot}h$) of toluene in VOC components. In the flame test, LDF with MUF resin adhesives showed the most favorable shape after flame test compare to LDFs prepared other adhesives. Based on HCHO and TVOC emission, and combustion shapes, MUF resin adhesive may be recommended to prepare LDF for insulation purpose.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.3
• /
• pp.271-282
• /
• 2020

Sewage treatment plants are social infrastructure of cities. The sewage distribution rate in Korea is reaching 94% based on the sewage statistics based in the year of 2017. In Korean sewage treatment plants, use of PAC (Poly Aluminum Chloride) accounts for 58%. It contains a large amount of impurities (heavy metal) according to the quality standards, however, there have been insufficient efforts to reinforce the standards or technically improve the quality, which resulted in secondary pollution problems from injecting excessive coagulant. Also, the increase in the use of chemicals is leading to the increases in the annual amount of sewage sludge generated in 2017 and the need to reuse sludge. As such, this study aims to verify the possibility of reusing sludge by evaluating the stability of heavy metals based on the injection of coagulant mixture during water treatment which uses the torrefield wood powder and natural materials, and evaluating the sedimentation and heating value of sewage sludge. As a result of analyzing heavy metals (Cr, Fe, Zn, Cu, Cd, As, Pb, and Ni) from the coagulant mixture and PAC (10%), Cr, Cd, Pb, Ni, and Hg were not detected. As for Zn, while its concentration notified in the quality standards for drinking water is 3 mg/L, only a small amount of 0.007 mg/L was detected in the coagulant mixture. Maximum amounts of over double amounts of Fe, Cu, and As were found with PAC (10%) compared to the coagulant mixture. Also, an analysis of sludge sedimentation found that the coagulant mixture showed a better performance of up to double the speed of the conventional coagulant, PAC (10%). The dry-basis lower heating value of sewage sludge produced by injecting the coagulant mixture was 3,378 kcal/kg, while that of sewage sludge generated due to PAC (10%) was 3,171 kcal/kg; although both coagulants met the requirements to be used as auxiliary fuel at thermal power plants, the coagulant mixture developed in this study could secure heating values 200 kal/kg higher than the counterpart. Therefore, utilization of the coagulant mixture for water treatment rather than PAC (10%) is expected to be more environmentally stable and effective, as it helps generating sludge with better stability against heavy metals, having a faster sludge sedimentation, and higher heating value.

• Journal of Chest Surgery
• /
• v.32 no.2
• /
• pp.130-137
• /
• 1999

Background: In cardiac surgery, hypothermia is associated with a number of major disadvantage, including its detrimental effects on enzymatic function, energy generation and cellular integrity. Warm cardioplegia with normothermic cardiopulmonary bypass cause three times more incidence of permanent neurologic deficits than the cold crystalloid cardioplegia with hypothermic cardiopulmonary bypass. Interruptions or inadequate distribution of warm cardioplegia may induce anaerobic metabolism and warm ischemic injury. To avoid these problems, tepid blood cardioplegia was recently introduced. Material and Method: To evaluate whether continuous tepid blood cardioplegia is beneficial in clinical practice during valvular surgery, we studied two groups of patients matched by numbers and clinical characteristics. Warm group(37$^{\circ}C$) consisted of 18 patients who underwent valvular surgery with continuous warm blood cardioplegia. Tepid group(32$^{\circ}C$) consisted of 17 patients who underwent valvular surgery with continuous tepid blood cardioplegia. Result: Heartbeat in 100% of the patients receiving continuous warm blood cardioplegia and 88.2% of the patients receiving continuous tepid blood cardioplegia converted to normal sinus rhythm spontaneously after removal of the aortic cross clamp. There were no differences between these two groups in CPB time, ACC time, the amount of crystalloid cardioplegia used and peak level of potassium. During the operation, the total amount of urine output was more in the warm group than the tepid group(2372${\pm}$243 ml versus 1535${\pm}$130 ml, p<0.01). There were no differences between the two groups in troponin T level measured 1hr and 12hrs after the operation. Conclusion: Continuous tepid blood cardioplegia is as safe and effective as continuous warm blood cardioplegia undergoing cardiac valve surgery in myocardial protection.

• Journal of the Korea Concrete Institute
• /
• v.22 no.6
• /
• pp.851-858
• /
• 2010

In this study, waste glass and bottom ash were used as basic materials in order to secure a recycling technology of by-products which was mostly discarded and reclaimed. In addition, because softening point of waste glass is less than $700^{\circ}C$ and bottom ash includes combustible material, it was possible to manufacture low-temperature sintering lightweight aggregates for energy saving at $800{\sim}900^{\circ}C$ that it is as much as 20~30% lower than sintering temperature of existing lightweight aggregates. Thermal conductivity of newly-developed lightweight aggregates was 0.056~0.105W/m. K and its porosity was 40.36~84.89%. A coefficient of correlation between thermal conductivity and porosity was -0.97, it showed very high negative correlationship. With this, we were able to verify that porosity is key factor to affect thermal conductivity. Microstructure of lightweight aggregates by $CaCO_3$ content and replacement ratio of bottom ash in the variation of temperature were that $CaCO_3$ content increased along with pore size while replacement ratio of bottom ash increased as pore size decreased. Specially, most pores were open pore instead of closed pore of globular shape when replacement ratio of bottom ash was 30%, and pore size was small about 1/10~1/5 as compared with case in bottom ash 0~20%. In addition, open pore shapes were remarkably more irregular form of open pore in $900^{\circ}C$ than $700^{\circ}C$ or $800^{\circ}C$ when replacement ratio of bottom ash was 30%. We reasoned hereby that these results will influence on absorption increase, strength and thermal conductivity decrease of lightweight aggregates.