• Progress in Medical Physics
• /
• v.17 no.1
• /
• pp.17-23
• /
• 2006

In Vivo dosimetry is a method to evaluate the radiotherapy; it is used to find the dosimetric and mechanical errors of radiotherapy unit. In this study, on-line In Vivo dosimetry was enabled by measuring the skin dose with MOSFET detectors attached to patient's skin during treatment. MOSFET dosimeters were found to be reproducible and independent on beam directions. MOSFET detectors were positioned on patient's skin underneath of the dose build-up material which was used to minimize dosimetric error. Delivered dose calculated by the plan verification function embedded in the radiotherapy treatment planning system (RTPs), was compared with measured data point by point. The dependency of MOSFET detector used in this study for energy and dose rate agrees with the specification provided by manufacturer within 2% error. Comparing the measured and the calculated point doses of each patient, discrepancy was within 5%. It was enabled to verify the IMRT by using MOSFET detector. However, skin dosimetry using conventional ion chamber and diode detector is limited to the simple radiotherapy.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.3
• /
• pp.58-65
• /
• 2014

This study aims to understand the environmental impact reduction of green buildings that are certified by Green standard for energy and environmental design(G-SEED). To ensure this end, this study assessed and compared the environmental impacts(global warning, ozone layer depletion, acidification, and eutrophication) of a G-SEED-certified elementary school building(green building) and an uncertified elementary school building(traditional building) using the life cycle assessment methodology. This study considered the environmental impacts from the material manufacturing, material transportation, on-site construction, and operation during 40 years. The comparison of the environmental impact intensity of two buildings showed that the green building generated much more environmental impacts than the traditional building. For example, the global warming potential of the green building was approximately 12.5% higher than of the traditional building since the global warming potential of the green building was 3.751 $t-CO_2eq./m^2$ while that of the traditional building was 3.282 $t-CO_2eq./m^2$. It signifies that the G-SEED doesn't guarantee the reduction of the environmental impacts in terms of four impact categories. Therefore, the G-SEED should be complemented and improved to achieve the environmental impact reduction.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.6
• /
• pp.69-75
• /
• 2010

Total suspendid solid (TSS) of non point source pollutants in construction site are in higher concentration than others (BOD, COD etc). Also, the TSS concentration is very sensitive to the rainfall intensity in early stage of construction. There are two methods for treatment of non point source pollutants, which are temporary treatment facility and filtering one. But they have disadvantages. Temporary facility system has very low efficiency and filtering system consumes high energy and takes up large footprint. This study shows how prefabricated flocculation/coagulation system is developped to cover the above weakness and evaluation of the system performance in construction site. The prefabricated flocculation/coagulation system has very high treatment efficiency comparing with temporary and filtering system and takes small footprint. Therefore, it expects that the system leads to prevention of pollution near construction site and reduction of public grievance. Proper coagulant dosage and sludge circulation facility application, controlling the height of sludge interfacial are necessary to maximize the system efficiency.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.493-496
• /
• 2005

비정질 실리콘 (a-Si)의 수소화를 통해 활성화 수소가 비정질 실리콘내의 댕글링본드 (dangling bond) 와 결합 하므로 에너지밴드의 국재준위(localized state)를 감소시켜 불순물 도핑이 가능하게 되므로 a-Si 이 전자소자로서 이용 가능하게 되었다. 이에 착안하여 본 연구에서는 경사($0^{\circ}$, $45^{\circ}$, $80^{\circ}$) 증착을 통해 비정질 칼코게나이드($a-As_{40}Ge_{10}Se_{15}S_{35}$) 박막을 제작하고 그 박막을 수소화처리 (15~20atm at $150\sim190^{\circ}C$)하여 처리 전 후의 surface morphology 변화 및 광학적 특성 변화를 고찰하였다. $a-As_{40}Ge_{10}Se_{15}S_{35}$ 박막의 SEM 측정을 통해 $40^{\circ}$와 $80^{\circ}$ 경사 증착된 $a-As_{40}Ge_{10}Se_{15}S_{35}$ 박막에서 각각 18.8nm 와 160nm의 transition layer와 박막의 기둥(columnar)구조가 형성됨을 관찰하였다. 특히, $80^{\circ}$ 증착박막의 경우 수소처리전 columnar구조는 약 $65\sim70^{\circ}$의 기둥 각을 가지고 형성되었고 수소화 처리를 통해 기둥구조가 붕괴 되었다. $70^{\circ}$ 경사 증착된 $a-As_{40}Ge_{10}Se_{15}S_{35}$ 박막은 $0^{\circ}$에 따른 박막 보다 흡수단 부근에서 약 20%의 투과도 증가와 광 에너지 갭 ($E_{op}$)의 증가를 관찰 할 수 있었다. $80^{\circ}$경사 증착된 수소처리 박막에서 흡수단 부근의 투과도가 약 10%증가 되었고, 광 에너지 갭은 약 0.07eV 증가 하였고, PL intensity는 흡수단 부근에서 증가한 것을 확인 할 수 있었다. 이러한 변화들은 경사 증착된 $a-As_{40}Ge_{10}Se_{15}S_{35}$ 박막 내의 상대적으로 원자 밀도가 큰 기둥(columnar)구조가 생성되고, 이 원자 밀도가 높은 기둥구조의 댕글링본드와 주입된 수소가 흡착하여 에너지대의 국재준위를 감소시키기 때문으로 판단된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.276-276
• /
• 2010

Localized surface plasmon resonance (LSPR) has been explored recently as a promising approach to increase energy conversion efficiency in photovoltaic devices, particularly for thin film hydrogenated amorphous silicon (a-Si:H) solar cells. The LSPR is frequently excited via an electromagnetic (EM) radiation in proximate metallic nanostructures and its primary con sequences are selective photon extinction and local EM enhancement which gives rise to improved photogeneration of electron-hole (e-h) pairs, and consequently increases photocurrent. In this work, high-dielectric-constant (k) $ZrO_2$ (refractive index n=2.22, dielectric constant $\varepsilon=4.93$ at the wavelength of 550 nm) is proposed as spacing layer to enhance the LSPR for application to the thin film silicon solar cells. Compared to excitation of the LSPR using $SiO_2$ (n=1.46, $\varepsilon=2.13$ at the wavelength of 546.1 nm) spacing layer with Au nanoparticles of the radius of 45nm, that using $ZrO_2$ dielectric shows the advantages of(i) ~2.5 times greater polarizability, (ii) ~3.5 times larger scattering cross-section and ~1.5 times larger absorption cross-section, (iii) 4.5% higher transmission coefficient of the same thickness and (iv) 7.8% greater transmitted electric filed intensity at the same depth. All those results are calculated by Mie theory and Fresnel equations, and simulated by finite-difference time-domain (FDTD) calculations with proper boundary conditions. Red-shifting of the LSPR wavelength using high-k $ZrO_2$ dielectric is also observed according to location of the peak and this is consistent with the other's report. Finally, our experimental results show that variation of short-circuit current density ($J_{sc}$) of the LSPR enhanced a-Si:H solar cell by using the $ZrO_2$ spacing layer is 45.4% higher than that using the $SiO_2$ spacing layer, supporting our calculation and theory.

• Korean Journal of Materials Research
• /
• v.3 no.3
• /
• pp.230-236
• /
• 1993

We have the homoepitaxiallayers on the surfaces of Si(111) with and without the adsorbed surfactants, for example, Ag or Sn. In this paper, We have studied the difference of growth for these two cases by the observation of intensity oscillations of RHEED specular spots during the growing processes. In the case of growth without the adsorbed surfactants, the Si atoms fill first the stacking fault layer of Si(111) 7 ${\times}$7 structure. Therefore, the irregular oscillations are observed in the early stage of growing process. However, in the case of growth with the adsorbed surfactants, the surfactants already have the ${\sqrt}{3}$ ${\times}$ ${\sqrt}{3}$ structures on the surfaces of Si(111) at the adjucate temperatures of 300`$600^{\circ}C$ and 190~$860^{\circ}C$ for the surfactants of Ag and Sn, respectively. We also find that the number of oscillations is a little larger for the case of growth with the adsorbed surfactants. The reason for this is that for the case of growth with the adsorbed surfactants, the activation energies of Si atoms decrease due to the segregation of surfactants toward the growing surfaces.

• Horticultural Science & Technology
• /
• v.34 no.1
• /
• pp.84-93
• /
• 2016

Plant factories with artificial lights require a large amount of electrical energy for lighting; therefore, enhancement of light use efficiency will decrease the cost of plant production. The objective of this study was to enhance the light use efficiency by using filters to diffuse the light from LED sources in plant factory conditions. The two treatments used diffuse glasses with haze factors of 40% and 80%, and a control without the filter. For each treatment, canopy light distribution was evaluated by a 3-D ray tracing method and canopy photosynthesis was measured with a sealed acrylic chamber. Sixteen lettuces for each treatment were cultivated hydroponically in a plant factory for 28 days after transplanting and their growth was compared. Simulation results showed that the light absorption was concentrated on the upper part of the lettuce canopy in treatments and control. The control showed particularly poor canopy light distribution with hotspots of light intensity; thus the light use efficiency decreased compared to the treatments. Total light absorption was the highest in the control; however, the amount of effective light absorption was higher in treatments than the control, and was highest in treatment using filters with a haze factor of 80%. Canopy photosynthesis and plant growth were significantly higher in all the treatments. In conclusion, application of the diffuse glass filters enhanced the canopy light distribution, photosynthesis, and growth of the plants under LED lighting, resulting in enhanced the light use efficiency in plant factory conditions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.2
• /
• pp.94-102
• /
• 1991

This study was directed to further clarify the effect of resting time or dietary condition for the improvement of exercise capacity and physical fitness, and the changes of some body consitiuents and physiological functions which are related to the exercise metabolism. Sixteen male students(8 athletes and 8 nonathletes)were participated during 3 weeks(Aug. 20-Sep.9, 1989). Each subject performed two treadmill running trials at an absolute intensity (1 mintute in 3.4mph/15% slope and 2 minutes in 5.5mph/20% slope). In the resting time trials, general diet was fed before 1, 2, 4 and 12 hours of the treadmill exercise loaded. in the dietary condition trials, high carbohydrate(HC), high fat(HF) and high protein(HP) diet were fed before 2 hours of the treadmill exercise loaded. Control trial was that of resting time before treadmill exercise loaded after 12 hours of general diet feeding. Measurement were made to study the change of blood glucose, palmitate, lactate, blood pressure and heart rate. The results obtained are summarized as follows: Mean daily metabolizable period. In resting time trial, the blood glucose concentration of athlete and nonathlete from 2 hours group was similar to control group. The blood palmitate concentration of athlete was increased in 1 and 2 hours group but those of nonathlete was not only increased in 1 and2 hours group but was more increased in 12 hours group, compared with both control group. The blood lactate concentration was increased in all experimental group, compared with both control group and those of nonathlete was much higher than athlets. The elevation rate of blood pressure in pre-and after-exercise of athlete was lower than those of nonathlete. In dietary composition trial, the blood glucose concentration of athlete and nonathlete in HC group was higher than other diet groups. The blood lactate concentration of athlete and nonathlete in HC group was lower than other diet groups. There was no remarkable change of the blood palmitate concentration and heart rate in each dietary composition trial, but those of nonathlete was low in HC and high in HP group. In above results, it was suggested that the effective condition of resting time and dietary composition for the improvement of exercise capacity of nonathlete may be 2 hours and HC diet, respectively. But it was showed that the exercise capacity of athlete may not be affected by experimental condition of resting time, except 1 hour after feeding or of dietary composition because of well adaptation in new exercise condition.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2335-2342
• /
• 2007

Laser stimulation has been widely studied and used in clinic. However, electrical response by laser stimulation on meridians has not been investigated. In this study, we compared electric potential of laser and acupuncture stimulation on meridians. We measured electric potential variation at acupoints(Samgan(LI3) and Hapgok(LI4)) on Large Intestine Meridian. In laser stimulation results, average peak electric potential is very low($7.53{\pm}3.44{\mu}V$) for before and after stimulation. However, acupuncture stimulation was performed in ground connection condition and resulted in huge variation of average peak electric potential($2.65{\pm}1.53mV$). That is, the intensity and pattern of electric potential were dependent on the ground connection condition and individual. Also, the electric potential pattern was very similar to the pattern of electric charge and discharge of capacitor. The acupuncture stimulation using a insulating needle resulted in lower average peak electric potential variation($0.25{\pm}0.16mV$) than that of acupuncture stimulation. It might present little electrical response of acupuncture stimulation using insulating needles. In point of electrical response, the laser stimulation was determined to be no acupuncture effect at meridian. Acupuncture stimulation seems to be most effective method to induce electrical response at meridians. The procedure and effect of acupuncture might be considered as energy consensus phenomenon by transportation of bio-ion charge between a practitioner and patient.

• Food Engineering Progress
• /
• v.13 no.2
• /
• pp.138-146
• /
• 2009

The crude polysaccharide fraction from fruit body of Auricularia auricula were obtained by using hot water extraction and ethanol precipitation. As the crude polysaccharide fraction contained the brownish dark colored compounds, the adsorption study of pigments from the crude polysaccharide using activated carbon was carried out. The pigment compounds showed an absorption characteristic with $\lambda_{max}$ of 230 nm and the absorbance at 230 nm was taken as color intensity. Adsorption capacity of pigment depended on increase of the activated carbon to sample loading ratio. The adsorption capacity increased with increase of pH and temperature in the pH range of 3.0-7.0 and temperature range of 25-40$^{\circ}C$, but decreased in the temperature range of 40-70$^{\circ}C$. The optimum capacity was obtained at addition of 16.7 mg activated carbon per mL sample solution (concentration = 3 mg/mL) at pH of 7.0 and temperature of 40$^{\circ}C$. Treatment for 10 min was sufficient to achieve the 80% decolorization and 1.25 fold purification of polysaccharide. Langmuir isotherm and pseudo second-order kinetic model provided the best fitting for adsorption of the brownish dark colored compounds onto powdered active carbon. The activation energies of adsorption from the Langmuir isotherm parameter in the ranges of 25-40$^{\circ}C$ and 40-70$^{\circ}C$ was -2.54 and 4.38 kcal/g, respectively. The results of low activation energy also indicated that the adsorption process was a physical adsorption which was controlled by diffnsion.