• 한국초지조사료학회지
• /
• 제20권3호
• /
• pp.147-154
• /
• 2000

This study was conducted to increase the utility and productivity of forage crops at high altitued areas. For that purpose, 21 cultivars of corn and 2 cultivars of rye were cultivated for 3 years using a randomized block designed with 3 replications. The results obtained were as follows. 1. In the Taekwallyong area (800m above sea level) which has a short frostless period, all the seeding and harvest of corn must be finished within about 135 days between mid May, the time of the last frost, and late September, the time of the first frost 2. It was relatively safe for the early maturity cultivar(ll0days) and the medium maturity cultivar(l20days), compared to the late maturity cultivar(l30days) which might have had the possibility of an overlapping period between the time of harvest and the first frost in high altitude areas 3. The productivity of forage corn, which is the most efficient crop for capturing solar energy, varied significantly with the climate circumstances but the productivity of Taekwallyong showed similar results of 19 M/T/ha, compared with 20 M/T/ha in Suwon from the '96-'98 study 4. Rye could be cultivated in high altitude areas and when corn was raised as a second crop after rye in the same year, it was possible to increase the productivity of dry matter yield by 20% through double cropping(P < 0.05). (Key words : Cropping system, Corn, Rye, Forage production)

• Journal of Radiation Protection and Research
• /
• 제23권4호
• /
• pp.219-227
• /
• 1998

온실내에서 $^{85}Sr$, $^{103}Ru$, $^{134}Cs$의 혼합용액을 배추의 생육중 다섯 차례에 걸쳐 엽면에 분무처리 하였다. 처리된 핵종이 작물체에 의해 차단되는 정도는 핵종간에 차이가 없었고 처리시기가 수확기에 가까울수록 점점 증가하였다. 측정된 차단계수의 최고치는 0.87이었다. 작물체에 침적한 핵종의 수확시 잔류율은 처리시기에 따라 전체잎의 경우 $^{85}Sr$가 $16{\sim}58%$, $^{103}Ru$이 $15{\sim}73%$, $^{134}Cs$가 $33{\sim}64%$ 였고 속잎(6장의 겉잎 제거)의 경우 각각 $2{\sim}35%$, $0.4{\sim}46%$ 및 $14{\sim}40%$였다. 강우가 방사성 핵종의 환경제거 정도를 결정하는 데 중요한 역할을 한다는 것이 확인되었다. 배추의 생육후기 처리시 상단부를 묶었을 때 차단계수와 속잎 잔류율이 서너배씩 감소되었다 본 연구결과는 배추의 생육중 사고방출시 배추내 핵종농도 예측 및 대책수립에 활용될 수 있다.

• Journal of Radiation Protection and Research
• /
• 제25권1호
• /
• pp.21-30
• /
• 2000

벼의 방사성 핵종 직접오염 경로를 분석하기 위하여 동위원소 실험온실내에서 $^{54}Mn,\;^{57}Co,\;^{85}Sr,\;^{134}Cs$의 혼합용액을 벼의 생육중 여섯 차례에 걸쳐 작물체 지상부에 처리하였다. 작물체 차단계수는 핵종 간에 차이가 없었고 처리시기가 수확기에 가까울수록 증가하여 최고 약 0.94에 달리하였다. 작물계에 침적한 각 핵종의 수확시 잔류율은 방사능 붕괴가 없다고 가정할 예 처리시기에 따라 각각 $19{\sim}47%,\;17{\sim}43%,\;19{\sim}42%,\;23{\sim}61%,\;11{\sim}69%$였다. 종실 전류계수는 처리시기에 따라 각각 $6.9{\times}10^{-4}{\sim}3.8{\times}10^{-2},\;3.6{\times}10^{-3},\;1.6{\times}10^{-1}{\sim}5.8{\times}10^{-4}{\sim}3.2{\times}10^{-2},\;1.6{\times}10^{-4}{\sim}7.6{\times}10^{-5},\;3.2{\sim}10^{-2}{\sim}2.0{\times}10^{-1}$의 범위였고 모두 종실의 발육성기 처리시 가장 높았다. 강우 빈도의 차이가 2배 이내일 때는 강우빈도가 잔류율과 전류계수에 큰 영향을 미치지 않는 것으로 나타났다. 본 연구결과는 벼의 생육중 사고침적시 쌀알 내 핵종농도 예측에 활용될 수 있다.

• 에너지공학
• /
• 제9권4호
• /
• pp.366-371
• /
• 2000

본 연구는 동적형 빙축열시스템에 있어서 증발판이 축열조 상부에 설치되어 생성된 얼음을 주기적으로 분리, 이탈시켜 하부에 설치된 축열조에 저장하는 기존의 하베스트형 빙축열시스템과는 반대로 축열조 내에 증발판을 설치하여 수중에서 얼음을 생성시키고 분리시켜 부럭에 의해 얼음을 띄워 저장하는 새로운 방식의 수중 하베스트형 빙축열시스템 개발에 관한 연구이다. 본 방식은 축열조 내에 증발판이 설치되어 제빙과 탈빙이 이루어짐으로서 기존 시스템에 설치되는 순환펌프나 순환수 분배기 및 배관 등의 설비가 불필요하고, 또한 조내 물과 증발판이 직접접촉에 의해 열교환이 이루어지므로 기존 공기 중에서의 열교환 방식보다 전열효율이 우수한 장점을 가지고 있다. 따라서 본 연구에서는 상기의 수중 빙제조 방식에있어 빙 제조시와 방냉시 축열조의 열특성을 실험적으로 밝혀 시스템 최적화 및 성능 향상에 대한 기초 자료를 제공하고자 하였다.

• Journal of Power Electronics
• /
• 제5권4호
• /
• pp.247-256
• /
• 2005

In order to harvest power in an efficient manner from a micro piezoelectric (PZT) device for charging the battery of a remote system, a new AC/DC resonant pulse power converter is proposed. The proposed power converter has two stages in the power conversion process. The first stage includes N-type MOSFET full bridge rectifier. The second stage includes a boost converter having an N-type MOSFET and a P-type MOSFET. MOSFETs work in the $1^{st}$ or $3^{rd}$ quadrant region. A small inductor for the boost converter is assigned in order to make the size of the power converter as small as possible, which makes the on-interval of the MOSFET switch of the boost converter ultimately short. Due to this short on-interval, the parasitic junction capacitances of MOSFETs affect the performance of the power converter system. In this paper, the performance of the new converter is analytically and experimentally evaluated with consideration of the parasitic capacitance of switching devices.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 추계학술대회
• /
• pp.74-75
• /
• 2010

As global warming due to burning fossil fuels and natural resource depletion issues have emerged, the development of renewable energy sources such as photovoltaics (PV) has been brought to recent interest. Amongst the vast efforts to harvest and convert solar energy into electricity, the module integrated converters (MIC) has become a worthy topic of research for grid-connected photovoltaic systems. Due to the required high-boosting qualities, only a restricted amount of DC/DC converter topologies can be applied to MICs. This paper investigates the possibility of a tapped-inductor boost converter as a candidate for PV MICs. A dual-inductor interleaving scheme operating slightly above the boundary of the two conduction modes (BCM) is suggested for reduction of input current ripple and minimization of component stress. A digital controller is used for implementation, assuring maximum power tracking and transfer while providing sufficient computational space for other grid connectivity applications, etc. For verification, a 200W converter is designed and simulated via computer software including component losses. High efficiency over a wide power range proves the feasibility of the proposed PV MIC system.

• 한국멀티미디어학회논문지
• /
• 제23권12호
• /
• pp.1507-1518
• /
• 2020

Recently, as the proportion of the elderly population in Korea has increased rapidly, it has entered an aging society. As the scope of social activities of the elderly increases, the risk of safety accidents is also increasing. The traffic accident rate of elderly pedestrians is higher than ordinary people. Although various smart devices for the elderly are researched and developed, electronic components are often used. Electronic devices may not be able to be used if charging is not regularly. In this paper, a smart hat, a smart system for the elderly and the weak, was implemented using solar panels. The system uses solar energy to provide reliable use of smart devices. It is believed to be helpful not only for the elderly but also for the weak people by easy to wear the hat.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권1호
• /
• pp.1-19
• /
• 2020

In an underlay cognitive simultaneous wireless information and power transfer (SWIPT) network, communication from secondary user (SU) to secondary destination (SD) is accomplished with decode-and-forward (DF) relays. Multiple energy-constrained relays are assumed to harvest energy from SU via power splitting (PS) protocol and complete SU secure information transmission with beamforming. Hence, physical layer security (PLS) is investigated in cognitive SWIPT network. In order to interfere with eavesdropper and improve relay's energy efficiency, a destination-assisted jamming scheme is proposed. Namely, SD transmits artificial noise (AN) to interfere with eavesdropping, while jamming signal can also provide harvested energy to relays. Beamforming vector and power splitting ratio are jointly optimized with the objective of SU secrecy capacity maximization. We solve this non-convex optimization problem via a general two-stage procedure. Firstly, we obtain the optimal beamforming vector through semi-definite relaxation (SDR) method with a fixed power splitting ratio. Secondly, the best power splitting ratio can be obtained by one-dimensional search. We provide simulation results to verify the proposed solution. Simulation results show that the scheme achieves the maximum SD secrecy rate with appropriate selection of power splitting ratio, and the proposed scheme guarantees security in cognitive SWIPT networks.

• 한국전기전자재료학회논문지
• /
• 제25권3호
• /
• pp.176-181
• /
• 2012

Due to the high etch rate and low fabrication cost, the wet etching of silicon using KOH etchant is widely used in MEMS fabrication area. However, anisotropic etch characteristic obstruct intuitional mask design and compensation structures are required for mask design level. Therefore, the accurate modeling for various types of silicon surface is essential for fabrication of three-dimensional MEMS structure. In this paper, we modeled KOH etch profile for MEMS based energy harvester using fuzzy logic. Modeling results are compared with experimental results and it is applied to design of compensation structure for MEMS based energy harvester. Through Fuzzy inference approaches, developed model showed good agreement with the experimental results with limited etch rate information.

• 전기전자학회논문지
• /
• 제27권4호
• /
• pp.411-417
• /
• 2023

무인 항공기(UAV) 지원 중계는 분포가 쉽고 통신 채널이 양호하며, 이동성이 뛰어나 기존 지상 중계에 비해 높은 무선 연결성을 가질 수 있다. 본 논문에서는 무선 주파수(RF) 대역을 활용하여 소스로부터 에너지를 수확하고 테라헤르츠(THz) 대역을 활용하여 2차 송신기와 해당 수신기 간에 정보를 전송할 수 있는 UAV 지원 중계 네트워크를 설계한다. 그 후, 릴레이 채널 용량을 최대화하는 UAV의 최적 위치를 결정하기 위한 최적화 문제의 해를 유도하고, 유도된 해를 활용하여 두 가지 UAV 궤적(직선 궤적과 타원 궤적)을 설계하는 알고리즘을 제안한다. 시뮬레이션 결과, 제안된 알고리즘은 UAV 직선 궤도가 수확된 에너지 및 채널 용량 측면에서 더 나은 시스템 성능을 제공할 수 있음을 보여준다.