• Journal of Radiation Protection and Research
• /
• v.22 no.3
• /
• pp.171-181
• /
• 1997

A mixed solution of $^{54}Mn$, $^{60}Co$, $^{85}Sr$ and $^{137}Cs$ was applied to the soil of culture boxes in a greenhouse 2 days before transplanting red pepper and at 3 different times during its growth for investigating transfer factors ($m^2/kg-dry$) for its green and red fruits. Transfer factors varied with radionuclide, application time and harvest time by factors of about $20{\sim}100$. They decreased mostly in the order of $^{85}Sr>^{54}Min>^{60}Co>^{137}Cs$ while $^{54}Mn$ and $^{60}Co$ was higher than $^{85}Sr$ when time lapse between application and harvest was short. Transfer factors of $^{85}Sr$ and $^{137}Cs$ at the last application were lower than those at the previous one by factors of $3{\sim}20$ depending on harvest time. Variations in $^{54}Mn$ and $^{60}Co$ transfer factors with application time after transplanting were comparatively low. Transfer factors of $^{54}Mn$, $^{60}Co$ and $^{85}Sr$ mixed with topsoil before transplanting were up to $3{\sim}9$ times higher than those for the application onto soil surface 2 days after transplanting while there was no difference in $^{137}Cs$. The present results can be referred to in estimating root-uptake concentrations of the radionuclides in red pepper fruit and taking proper measures for its harvest and consumption at the event of an accidental release during the growing season of red pepper.

• Journal of Radiation Protection and Research
• /
• v.29 no.4
• /
• pp.213-219
• /
• 2004

Soybean plants were exposed to HTO vapor in an exposure box for 1 hour at different growth stages. Relative concentrations of TFWT at the end of exposure (percent ratios of TFWT concentrations to mean HTO concentrations in air moisture in the box during exposure) decreased on the whole in the order of leaf > shell > seed > stem with the highest values of 40.2% and 6.4% for leaf and stem, respectively. TFWT concentrations reduced by factors of several thousands to several hundred-thousands from the end of exposure till the harvest. The reduction factor decreased in the order of leaf > shell > seed > stem. Relative OBT concentrations at harvest (ratios of the OBT concentration in the dry plant part at harvest to the initial leaf TFWT concentration, ml $g^{-1}$) were in the range of $2.2{\times}10^{-5}{\sim}9.5{\times}10^{-3}$ for seeds being the highest when the exposure was performed at the actively seed-developing stage. The exposure time-dependent variation in the OBT concentration was much greater in seeds and shells than in leaves and stems. It was indicated that OBT would contribute to almost all the radiation dose due to the consumption of soybean seeds in most cases after an acute exposure of growing plants to HTO vapor. Present results are applicable to establishing and validating soybean $^3H$ models for an acute accidental release of HTO.

• Journal of Biosystems Engineering
• /
• v.41 no.3
• /
• pp.177-183
• /
• 2016

Purpose: Mee (Madhuca longifolia) is an economically important tree growing throughout Sri Lanka. Its importance is mainly attributed to its oil with high nutritional and medicinal values. However, an inefficient extraction method limits its use. This study revealed the possibility of extracting oil from mee seeds by using a screw-type oil expeller. Methods: A popular screw-type oil expeller was used in the experiment. Extract bar clearance and speeds of the main spiral shaft were altered to increase the oil expelling efficiency of the machine. The quality of refined oil at the optimum oil yield was determined by measuring the refractive index, saponification value, iodine value, unsaponifiable matter, free fatty acid, and specific gravity. Results: An optimum yield of 35% oil was obtained when the machine capacity was 30 kg/h and energy consumption was 0.13 kWh/kg. This optimum machine condition was observed at an extract bar clearance of 0.5 mm and a main spiral shaft speed of 90 rpm. The refractive index, saponification value, iodine value, unsaponifiable matter, free fatty acid, and specific gravity of the oil were 1.4, 203, 59, 3.5%, 0.2%, and 0.907 g/cm3 respectively. Color of the mee oil was closer to yellow, which is revealed by the lightness value (L) of 24.93 and positive value (b) of 11.81. Conclusion: The screw-type oil expeller can be used for economically extracting mee oil on a commercial scale.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.12
• /
• pp.1705-1711
• /
• 2001

Silage corn (Zea mays L) is grown extensively in livestock operations, and many managements focus on forage yield. This experiment was conducted at Seoul National University (SNU) Experimental Livestock Farm, Suwon in 1998. We determined the effect of planting date and harvest stage on forage yield and quality responses of corn hybrids (five relative maturity groups). The five maturity groups (100 d, 106 d, 111 d, 119 d and 125 d) were planted on 15 April and 15 May, and harvested at maturity stages (1/3, 1/2 and 2/3 kernel milkline). Whole plant dry matter (DM) and ear percentages had significant differences among corn hybrids. Ear percentages of early maturing corns (100 d and 106 d) were higher than for other hybrids. Ear percentage at the early planting date was higher than that at the late planting date for all corn hybrids. The DM and total digestible nutrients (TDN) yields of the 106 d and 111 d corn hybrids were higher than other hybrids, and the DM and TDN yields at the early planting date were higher than that at the late planting date. The acid detergent fiber (ADF) and neutral detergent fiber (NDF) percentages were greater for the late maturity corn hybrids. For plants of the early planting date, the ADF and NDF percentages were lower than for those of late planting date for hybrids. From the comparison among harvest stages, ADF and NDF percentages were decreased as harvest stage progressed. The TDN, net energy for lactation (NEL), and cellulase digestible organic matter of dry matter (CDOMD) were decreased as maturity of corn hybrid delayed. The TDN, NEL, and CDOMD values at the early planting date were higher than those at the late planting date among for corn hybrids. From the comparison among harvest dates, TDN, NEL, and CDOMD values were increased as harvest stage progressed. The correlation coefficient for DM percentage of grain at harvest with DM and TDN yields were 0.68*** and 0.76***, respectively. And the correlation coefficient for ear percentage with ADF, NDF, and CDOMD were -0.81***, -0.82*** and 0.73***, respectively. Our study showed differences of silage corn in forage production and quality resulting from hybrid maturity, planting date, and harvest stage. We believe that for the best silage corn, selection of the hybrid and best management practices are very important.

• Smart Structures and Systems
• /
• v.16 no.4
• /
• pp.623-640
• /
• 2015

This paper presents techniques to harvest higher voltage from piezoelectric cantilever energy harvester by structural alteration. Three different energy harvesting structures are considered namely, stepped cantilever beam, stepped cantilever beam with rectangular and trapezoidal cavity. The analytical model of three energy harvesting structures are developed using Euler-Bernoulli beam theory. The thickness, position of the rectangular cavity and the taper angle of the trapezoidal cavity is found to shift the neutral axis away from the surface of the piezoelectric element which in turn increases the generated voltage. The performance of the energy harvesters is evaluated experimentally and is compared with regular piezoelectric cantilever energy harvester. The analytical and experimental investigations reveal that, the proposed energy harvesting structures generate higher output voltage as compared to the regular piezoelectric cantilever energy harvesting structure. This work suggests that through simple structural modifications higher energy can be harvested from the widely reported piezoelectric cantilever energy harvester.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.593-596
• /
• 2006

This paper introduces various natural energy systems installed at the Eco-Science Center in Geumsan near Taejon. The center, especially, features different solar energy systems to harvest the solar energy to its full extent. Such passive schemes as direct gain and at lacked sun space are applied along with active solar ingredients using flat plate and double skin solar collectors. Space and water heating depends very little on the conventional means. Also a number of photovoltaic modules deployed within its premise supplies power to drive a water pump for the biotop. Combined with other natural energy utilizing systems, the solar energy systems make an exemplary model of a self sustainable public facility which is the first of its kind in Korea.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.1
• /
• pp.48-56
• /
• 2018

The present study aimed to understand the variation in seed germination according to the storage period after harvest in the accessions of cultivated and weedy types of Perilla species in Korea. In this milieu, we investigated the germination rate and germination energy of 59 Perilla accessions (15 cultivated var. frutescens type I, 4 cultivated var. frutescens type II, 20 weedy var. frutescens, and 20 weedy var. crispa), which were harvested in autumn 2016. The accessions of cultivated var. frutescens (type I) showed an average germination rate of 80.8% 6 months after harvest; however, the accessions of weedy var. frutescens and var. crispa showed an average germination rate of 0.9% and 8.7%, respectively. Furthermore, the accessions of cultivated var. frutescens (type II) showed an average germination rate of 18.2%. The accessions of cultivated var. frutescens (type I) showed an average germination energy of 75.8%, while the accessions of weedy var. frutescens and var. crispa showed an average germination energy of 0.6% and 6.9%, respectively. In addition, the accessions of cultivated var. frutescens (type II) showed an average germination energy of 14.3%. The germination rate and germination energy for the accessions of cultivated and weedy types of Perilla species increased marginally at 2 months from the first month after harvest. However, it did not significantly increase until six months after that. According to our results, there are two types of cultivated var. frutescens, namely, type I, which showed high germination rate and germination energy, and type II, which showed low germination rate and germination energy. The results of this study will provide basic information to understand variations in the germination of seeds during 6 months of storage period after harvest in the accessions of cultivated and weedy types of Perilla species in Korea.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.243-248
• /
• 2022

As the scope of use of portable and wearable electronic devices is expanding, the limitations of heavy and bulky solid-state batteries are being revealed. Given that, it is urgent to develop a small energy harvesting device that can partially share the role of a battery and the utilization of energy sources that are thrown away in daily life is becoming more important. Contact electrification, which generates electricity based on the coupling of the triboelectric effect and electrical induction when the two material surfaces are in contact and separated, can effectively harvest the physical and mechanical energy sources existing in the surrounding environment without going through a complicated intermediate process. Recently, the interest in the harvest and utilization of wind energy is growing since the wind is an infinitely ecofriendly energy source among the various environmental energy sources that exist in human surroundings. In this study, the optimization of the energy harvesting device for the effective harvest of wind energy based on the contact electrification was analyzed and then, the utilization strategy to maximize the utilization of the generated electricity was investigated. Natural wind based Fluttering TENG (NF-TENG) using fluttering film was developed, and design optimization was conducted. Moreover, the safe high voltage generation system was developed and a plan for application in the field requiring high voltage was proposed by highlighting the unique characteristics of TENG that generates low current and high voltage. In this respect, the result of this study demonstrates that a portable energy harvesting device based on the contact electrification shows great potential as a strategy to harvest wind energy thrown away in daily life and use it widely in fields requiring high voltage.

• Journal of Communications and Networks
• /
• v.14 no.2
• /
• pp.130-139
• /
• 2012

Energy harvesting has emerged as a powerful technology for complementing current battery-powered communication systems in order to extend their lifetime. In this paper a general framework is introduced for the optimization of communication systems in which the transmitter is able to harvest energy from its environment. Assuming that the energy arrival process is known non-causally at the transmitter, the structure of the optimal transmission scheme, which maximizes the amount of transmitted data by a given deadline, is identified. Our framework includes models with continuous energy arrival as well as battery constraints. A battery that suffers from energy leakage is studied further, and the optimal transmission scheme is characterized for a constant leakage rate.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3365-3370
• /
• 2007

We developed micro power generation system using piezoelectric materials. In our system, the ambient vibrating energy is converting to electric energy by deflection of piezoelectric beams. The system consists of energy generating parts, converting enhancement parts, electric regulation and charging parts, and interface with small-energy-consuming mobile devices. The geometry of piezoelectric beams, the source of vibrating energy, and the electric load of target application determine the characteristics of generating electric power, such as impedance, voltage, current and power density. Therefore, we made a model for analysis of generating power with given information such as piezoelectric materials, geometry, vibration type, and mass. With this model, we can calculate capacitance of piezoelectric beams, generating voltage, current, and power. To obtain maximum energy transfer efficiency, we approached this study in the view of material, electrical, and mechanical engineering