• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3599-3616
• /
• 2023

After a nuclear power plant (NPP) accident, it would be helpful to predict the movement of the radioactive plume emitted from the NPP as accurately as possible to protect the nearby population. Radioactive plumes are mainly affected by wind direction and speed. Since it is difficult to identify the wind direction and speed immediately after the accident, a good understanding of the historical wind data could save many lives and ensure smoother evacuation procedures. In this study, wind data for the past 10 years are analyzed for the five NPPs in the Republic of Korea (ROK). The analyzed data include wind direction and wind speed from 2012 to 2021. In particular, the characteristics of the wind field blowing from the NPPs to the nearest densely populated regions are examined. Finally, suggestions to improve evacuation plans are made.

• Journal of Magnetics
• /
• 제15권3호
• /
• pp.116-122
• /
• 2010

An accurate analytical equation for the total energy in the framework of the single domain model is used to study the thermal stability of nanostructured synthetic ferrimagnets. Elliptical cells are considered that have lateral dimensions of 160 nm (long axis)$\times$80 nm (short axis) and varying values of thickness asymmetry for the two magnetic layers. The direction of the applied magnetic field, which points to the $45^{\circ}$ direction, is in the opposite direction to the thicker layer magnetization. A significant difference is observed in the applied magnetic field dependencies of the equilibrium magnetic configuration and the magnetic energy barrier when using the simplifying assumption that the self-demagnetizing field is identical in magnitude to the dipole field. At a small thickness asymmetry of 0.2 nm, for example, the magnetic energy barrier is reduced from 68 kT (T=300 K) to 6 kT at the remanent state and a progressive switching behavior changes into a critical behavior, as the simplifying assumption is used. The present results clearly demonstrate the need for an accurate analytical equation for the total energy in predicting the thermal stability of nanostructured synthetic ferrimagnets.

• 환경영향평가
• /
• 제20권2호
• /
• pp.175-185
• /
• 2011

It is usual for energy consumption in accordance with facing and sitting direction of tower-type apartments to be calculated by the official statistics or computer simulation. Previous studies for energy consumption appear to be very limited due to the dependence on flat type of apartment. Acknowledging these constraints, an empirical study for a tower type apartment was conducted to demonstrate how a on-site indoor temperature measurement in spring can be used to assist in estimating the total energy consumption in terms of facing and sitting orientation specific settings. The results indicate that maximum temperature difference in spring was identified as $1.16^{\circ}C$ between south and eastern direction. It is known that raising $1^{\circ}C$ indoor temperature require 7% more energy consumption than normal. The $1.16^{\circ}C$ difference means that sitting direction of tower type apartment is a crucial explanatory variable as unit of analysis for energy consumption. It was demonstrated that the indoor temperature could be used effectively as an indicator to estimate energy consumption among various sitting direction of tower type apartments. It is anticipated that this research output could be used as a valuable reference to support more scientific and objective decision-making for facing and sitting orientation of tower type apartments.

• 자원환경지질
• /
• 제24권3호
• /
• pp.219-226
• /
• 1991

High quality quartz crystals are grown in 0.5N NaOH + LiOH solution on the seed crystal at $370-395^{\circ}C$ and $1200-1300kg/cm^2$ condition. Growth rates are determined by the crystal thickness grown on the seed crystals with Z(0001) and X($11\bar{2}0$) direction. Relatively high growth rate of Z(0001) direction gradually changes as the temperaure difference (${\Delta}$ Ti) between growth and dissolution zones from 25 to $10^{\circ}C$. The X axis direction is affeced by ${\Delta}$ Ti, and +X($11\bar{2}0$) direction shows a high growth rate than -X($\bar{1}\bar{1}20$) direction. According to the variation with kinds of solutions used, the crystal growth that in NaOH solution is found to be slower than that in $Na_2CO_3$ solution. However, for the case in the NaOH solution mixed with LiOH, it shows a favorable growth rate in terms of grown crystal quality.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.272-277
• /
• 2004

The elastic waves in the plate are dispersive waves with the characteristics of Lamb waves. However, $S_0$ symmetric mode is less dispersive in the frequency region less than first cut-off frequency. And, in anisotropic plates such as CFRP plates, the propagation velocities vary with the direction. So, the wave vector direction to be the phase velocity direction is not accord with the energy flow direction to be the group velocity direction. In this work, the group velocities of the $S_0$ symmetric mode less than the first cut-off frequency was analyzed with the group velocity dispersion curves in unidirectional CFRP plate. And, the group velocity curve obtained by the group velocity dispersion curves are compared with the measured velocities as varied the propagation direction of the Lamb wave. The measured velocities are good agreement with the corrected group velocity curve except near the fiber direction which is called the cusp region. When the propagation direction is not accorded with the principal axis, the direction of the group velocities declines to the fiber direction in the unidirectional CFRP plates. This implies that the energy propagates preferentially toward fiber direction.

• 한국소음진동공학회논문집
• /
• 제11권6호
• /
• pp.181-192
• /
• 2001

The power flow analysis (PFA) has been performed to analyze the vibration of coupled plates excited by a point force in an arbitrary direction. The point force generates the out-of-plane vibration associated wish flexural waves and the in-plane vibration associated with longitudinal and shear waves. The energy governing equation for each type of waves was introduced and solved to Predict the vibrational energy density and intensity generated by the out-of-plane and in-plane components of the point force in an arbitrary direction. The wave transmission approach was used to consider the mode conversion at the joint of the coupled plates. Numerical results for vibrational energy density and intensity on the coupled plates were presented. Comparison of the results by PFA with exact results showed that PFA can be an effective tool to predict the spatial variation of the vibrational energy and intensity on the coupled plates at high frequencies.

• 한국태양에너지학회 논문집
• /
• 제31권5호
• /
• pp.1-8
• /
• 2011

In this study, we performed a sensitivity analysis to see how the true north error of a wind direction vane installed to a meteorological mast affects predictions of the annual-average wind speed and the annual energy production. For this study, two meteorological masts were installed with a distance of about 4km on the ridge in complex terrain and the wind speed and direction were measured for one year. Cross predictions of the wind speed and the AEP of a virtual wind turbine for two sites in complex terrain were performed by changing the wind direction from $-45^{\circ}$ to $45^{\circ}$with an interval of $5^{\circ}$. A commercial wind resource prediction program, WindPRO, was used for the study. It was found that the prediction errors in the AEP caused by the wind direction errors occurred up to more than 20% depending on the orography and the main wind direction at that site.

• 한국태양에너지학회 논문집
• /
• 제27권4호
• /
• pp.77-85
• /
• 2007

With the increase in the demand for sustainable and environment-friendly development all over the world, it becomes an urgent issue for Korea to reduce $CO_2$ emission. Since building industry accounts for about 40% of international energy and resource consumption and $30{\sim}40%$ of $CO_2$ emission, it is essential to prepare for energy-efficient building. This study aims to seek for improvement direction for a domestic Building Energy Efficiency Rating System through the comparison with foreign systems. Two foreign building energy rating systems which have the similar application scope with domestic one, HERS(Home Energy Rating System) and SAP(Standard Assessment Procedure)2005 were selected. As compared with foreign systems, we intended to suggest improvement direction for effective application of Building Energy Efficiency Rating System in Korea.

• 한국정보통신학회논문지
• /
• 제17권11호
• /
• pp.2699-2707
• /
• 2013

본 논문에서는 이동 에드 혹 네트워크(Mobile Ad-hoc network: MANET)에서의 상황인식 기반의 스케쥴링 기법인 DDV(Dynamic Direction Vector)-hop 알고리즘을 제안한다. 기존 MANET에서는 노드의 이동성으로 인한 동적 네트워크 토폴리지, 네트워크 확장성 결여의 대한 취약성을 지니고 있다. 또한 노드들의 이동성에 따라 에너지 소모율이 다르며, 에너지 소모율을 최소화하는 라우팅 기법을 선택하는 것이 중요하다. 따라서 본 논문에서는 계층적 클러스터 단위의 동적인 토폴로지에서 노드가 이동하는 방향성 및 시간에 따른 노드의 이동 속성 정보를 고려하여 클러스터를 생성 및 유지하는 DDV-hop알고리즘을 제안한다. 또한 주어진 노드의 위치정보를 이용하여 토폴로지를 형성함에 있어 보다 에너지 효율적인 경로를 탐색하여 최적화된 경로를 제공함에 연구의 목적이 있다. 주어진 모의 실험환경에서 노드의 방향성 및 시간에 따른 이동성을 반영함으로써 에너지 효율적인 클러스터링 및 라우팅 경로 알고리즘이 제공되어 네트워크의 최적화된 에너지 소모 결과를 보여주었다.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1486-1495
• /
• 2019

Dealing with the DC link fault poses a technical problem for an HVDC based on a modular multilevel converter. The fault suppressing mechanisms of several sub-module topologies with DC fault current blocking capacity are examined in this paper. An improved half-bridge sub-module topology with double direction control switch is also designed to address the additional power consumption problem, and a sub-module topology called hybrid double direction blocking sub module (HDDBSM) is proposed. The DC fault suppression characteristics and sub-module capacitor voltage balance problem is also analyzed, and a self-startup method is designed according to the number of capacitors. The simulation model in PSCAD/EMTDC is built to verify the self-startup process and the DC link fault suppression features.