• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.72-72
• /
• 2010

The PV module company use variable process step and type. Especially soldering process is important, because crystalline cell can be bow by beating temperature. Most PV module company use hot air soldering type in the tabbing & string process. Although hot air type is used widely but this type is bound to influence on cell damage. So recently new way is introducing like a high current way. In this paper, we compare with characteristics of each soldering type and then conform a method to minimize solar cell deformation. Actually solar cell deformation show many difference by fix position and cooling time after soldering step.

• Nuclear Engineering and Technology
• /
• v.27 no.5
• /
• pp.760-766
• /
• 1995

A general method is proposed for elastic stiffness analysis of the leaf type holddown springs using only the geometric data and Young's modulus of the springs. In this method, an engineering beam theory and Castigliano's theory are applied to elastic stiff analysis of the leaf type holddown springs. To show reliability and effectiveness of this method, the elastic stiffness from the proposed method is compared with test result and from the comparison, the unposed method has been proven to be effective for estimating the elastic stiffness of the leaf springs.

• Journal of Power Electronics
• /
• v.19 no.5
• /
• pp.1315-1325
• /
• 2019

Aiming at the negative sequence and harmonic problems in the operation of railway static power conditioners, an optimization compensation strategy for negative sequence and harmonics is studied in this paper. First, the hybrid RPC topology and compensation principle are analyzed to obtain different compensation zone states and current capacities. Second, in order to optimize the RPC capacity configuration, the minimum RPC compensation capacity is calculated according to constraint conditions, and the optimal compensation coefficient and compensation angle are obtained. In addition, the voltage unbalance ${\varepsilon}_U$ and power factor requirements are satisfied. A PSO (Particle Swarm Optimization) algorithm is used to calculate the three indexes for minimum compensating energy. The proposed method can precisely calculate the optimal compensation capacity in real time. Finally, MATLAB simulations and an experimental platform verify the effectiveness and economics of the proposed algorithm.

• Journal of the Korean Society of Food Culture
• /
• v.25 no.6
• /
• pp.755-763
• /
• 2010

The purpose of this study was to select market variables that a foodservice company should consider when expanding overseas and to regional market analysis by variables. Twenty-three different variables were derived from 17 previous studies. These were: population, urbanization rate, women employed, enrollment in tertiary education, gross domestic product, value added by service, total number of mobile cellular telephone subscribers, number of internet users, total Asian highway, inward foreign direct investment, total service imports, inflation rate, international tourist arrivals, energy use by industry, growth rates of the food consumer price index, access to urban sanitation, per capita total expenditure on health, male life expectancy at birth, adult literacy rate, contributing women family workers, passenger car, and country risk assessment. The selected variables were collected as secondary data from the UN, Asian Development Bank, International Bank for Reconstruction and Development, and Michigan State University.

• Journal of Environmental Policy
• /
• v.3 no.1
• /
• pp.71-94
• /
• 2004

The purpose of this study is to propose a way to develop and disseminate the renewable energy technologies and industries in the local community. Fundamentally, the renewable energy is able to reduce environmental pollution and diminish a use of fossil-fuel energy in the local area. And it will lead to promoting regional sustainable energy in the future, as well as making contributions to local economic development. Above all, based on the environmental conservation project, including greening of the city and improving water quality, Daegu metropolitan city has launched a series of renewable energy projects, such as solar city programs and local energy plan. But, some problems still exist, due to the technological, economic and socio-political barriers. Thus, to encourage and disseminate a renewable energy in Daegu city, we need to examine a present condition on renewable energy and analyze constraint elements to prevent its distribution. Based on the results, we have to set the feasible strategy to develop and disseminate renewable energy in Daegu city and help it systematically integrate renewable energy technologies and industries into environmental economics and city planning. Ultimately, to achieve this purpose, we need to adopt the following policy measures: (1) establishment of a master plan for renewable energy; (2) interconnection between local development project and energy industry; (3) promotion of technological development; (4) inducement of and assistance to renewable energy industry; (5) fostering venture companies; (6) specializing Daegu's public office by energy-specific education programs. In particular, local entities including local company, consumers, policy-makers and citizen's groups have to pay attention to local energy plan for the regional sustainable energy future. These measures will lead to establishing an environmentally friendly and sustainable city.

• Journal of Power Electronics
• /
• v.18 no.4
• /
• pp.1111-1126
• /
• 2018

In modern power systems, distributed generators (DGs) result in high stress on system frequency stability. Apart from the intermittent nature of DGs, most DGs do not contribute inertia or damping to systems. As a result, a new control method referred to as a virtual synchronous machine (VSM) has been proposed, which brought new characteristics to inverters such as synchronous machines (SM). DGs employing an energy storage system (ESS) provide inertia and damping through VSM control. Meanwhile, energy storage presents some physical constraints in the VSM implementation level. In this paper, a VSM mathematical model is built and analyzed. The dynamic responses of the output active power are presented when a step change in the frequency occurs. The influences of the inertia constant, damping factor and operating point on the ESS volume margins are investigated. In addition, physical constraints are proposed based on these analyses. The proposed physical constraints are simulated using PSCAD/EMTDC software and tested through RTDS experiment. Both simulation and RTDS test results verify the analysis.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.7
• /
• pp.97-104
• /
• 2011

This paper presents modeling and control for the emerging IGBT converter-based high-voltage direct-current system (IGBT-HVDC). This paper adds to the representation of the IGBT-HVDC system in the dq-synchronous reference frame and its decoupled control scheme. Additionally, since the IGBT-HVDC is able to actively support the grid due to its capacity to control independently active and reactive power production, a reactive power control scheme is presented in order to regulate/contribute to the voltage at a remote location by taking into account its operational state and limits. The ability of the control scheme is assessed and discussed by means of simulations using ahybrid power system, which consists of a permanent magnetic synchronous-generator (PMSG) based wind turbine, an IGBT-HVDC, and a local load.

• Solar Energy
• /
• v.10 no.1
• /
• pp.92-97
• /
• 1990

The electrochemical approach to the characteristics of black chrome solar selective coatings has been reviewed. Based on the formula of the ChromOnyx bath solution manufactured by Harshaw Company, the chromic acid-propionic acid bath solutions have been prepared by KIER. Comprehensive review of the black chrome electrodeposition mechanism also has been performed on the role played by constituents in the bath solution during electrodeposition. The optical properties such as absorption and emittance of electrodeposited black chrome coatings obtained from the new formula and their surface analysis will be reported in detail.

• New & Renewable Energy
• /
• v.8 no.1
• /
• pp.35-43
• /
• 2012

Patent analysis is the extracting knowledge which is needed for the company's research and development strategy through accumulated worldwide patent database. In order to set the future direction corresponding technology which is scheduled to be developed, the technology trends and deployment processes are identified by analyzing results of present patent applications. The patent analysis provides the required results for analyzing present patent applications. In this paper, technology classification for related patent analysis methods and system, and patent analysis for desalination technology using solar energy development was carried out as well. The patents in Korea, USA, Japan, China, and Europe were searched. The technology trend desalination technology using solar energy was analyzed based on patent application year, countries, main applications, and each technologies. The application status of desalination patents showed a tendency to increase slightly. It was found that the number of patent for applied desalination was USA patent 21.0%, Japan patent 27.0%, China 24.8%, EU 2.7% and Korea patent 24.5%, respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.4
• /
• pp.529-546
• /
• 2010

Greedy forwarding is the key mechanism of geographic routing and is one of the protocols used most commonly in wireless sensor networks. Greedy forwarding uses 1-hop local information to forward packets to the destination and does not have to maintain the routing table, and thus it takes small overhead and has excellent scalability. However, the signal intensity reduces exponentially with the distance in realistic wireless sensor network, and greedy forwarding consumes a lot of energy, since it forwards the packets to the neighbor node closest to the destination. Previous proposed greedy forwarding protocols are the sender-based greedy forwarding that a sender selects a neighbor node to forward packets as the forwarding node and hence they cannot guarantee energy efficient forwarding in unpredictable wireless environment. In this paper, we propose the receiver-based greedy forwarding called RGF where one of the neighbor nodes that received the packet forwards it by itself. In RGF, sender selects several energy efficient nodes as candidate forwarding nodes and decides forwarding priority of them in order to prevent unnecessary transmissions. The simulation results show that RGF improves delivery rate up to maximum 66.8% and energy efficiency, 60.9% compared with existing sender-based greedy forwarding.