• The Korean Journal of Ecology
• /
• v.21 no.1
• /
• pp.27-33
• /
• 1998

Arisaema robustum, which has the ability to change sex, was studied in a temperate broadleaf forest of Sanseong-ri, Joongbu-myeon, Gwangju-gun, Kyonggi Province, Korea. \ulcornerThe study, carried out from 1993 to 1997, focused on population dynamics energy budget among organs, size distribution, mortality, the relationships between sex and size, seed production and germination rate. In terms of energy budget among the organs, the ratio of aboveground to belowground biomass was 36.6 : 63.4 in non-female plants, and 81.4 : 18.6 in female plants. Also, in female plants, the ration of leaf to sexual organ biomass was 39.5 : 41.9. Therefore, the belowground ratio of female plants was lower than that of non-female plants. Plants were classified into 8 levels relative to the amount of leaf area by $100cm^2$. The rates of the smallest and the largest classes were 49% and 1%, respectively, and population distribution by size was relatively stable. The mortality averaged 13.1% per year and decreased in inverse proportion to leaf size (6.6% in the smallest and 0.0% in the largest size classes). Leaf areas were $64.1{\pm}48.5cm^2$ in non-flowering plants, $232.1{\pm}123.9cm^2$ in males and $444.8{\pm}153.9cm^2$ in females. The increase rates of leaf area per year varied from 1.9% in plants changing from female tomale, to 152.4% in plants changing from non-flowering to female. But plants which remained female for 2 years showed a decrease of 34.7%. >From this result, it is thought that the female plants invest more energy to reproduction than to vegetative organs. The correlation coefficient (CC) value between plant size and the number of seeds produced (0.55) was larger than the CC value between plant size and total seed weight (0.73). That is, the larger the plant size, the heavier the seed produced. The germination rate increased along with seed weight, and it was 95% in plants which were over 60mg fresh weight/seed.

• Transactions of the Korean hydrogen and new energy society
• /
• v.15 no.3
• /
• pp.201-207
• /
• 2004

Redox characteristics of metal oxide for hydrogen production by thermochemical water-splitting were investigated. $CuFe_2O_4$ as a redox pair that had a different molar ratio of Cu and Fe were prepared by co-precipitation method. Hydrogen production consisted of water-splitting step and thermal reduction step was performed below 1200K. Redox characteristics of Cu-ferrites were studied using the thermal gravimetric analysis technique. Also, structure change of Cu-ferrite during thermal reduction was investigated using the high temperature controlled XRD. In results, oxygen release of Cu-ferrite during the thermal reduction was initiated at oxygen site combined with Cu. Consequently, oxygen release amount of Cu-ferrite was increased with increase of Cu molar ratio of Cu-ferrite. It was found that thermal reduction of Cu-ferrite was begun at $875^\circ{C}$. It was confirmed that structure of Cu-ferrite was changed to metal and cation excess metal oxide during the thermal reduction step.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.2
• /
• pp.150-158
• /
• 2005

Added ratio of 8YSZ powder and organic compounds (solvent, plasticizer, dispersant, binder) properly. It manufactured electrolysis membrane by wet process that make slurry and dry process that do not use organic compounds. In the case of wet process, harmony combination and method of organic compound are an importance element in slurry manufacture. This slurry did calcine at temperature of 140$^{\circ}C$ in Furnace and manufactured electrolyte disk by Dry pressing method. Like this, manufacturing disk sintered at temperature of $1300^{\circ}C,\;1400^{\circ},\;1500^{\circ}C$ in Furnace and completed electrolysis membrane. Confirmed change of crystal structure and decision form through analysis of density, SEM, XRD according to change of sintering temperature, and considered relation with ion conductivity.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.35-35
• /
• 2011

Phase change material(PCM) has thermal energy storage and been attracted attention. Latent heat of the organic PCM can keep maintaining temperature when the change of outside energy conditions influence to PCM. Thus, many researchers have interested to thermal energy storage ability and investigated to applications such as thermal storage of solar energy, bioclimatic building, icebank, medical application, clothing industry and so on. Among the many applications, investigation of the PCM in clothing industry is also important because the people has interest functional factor called health-care in the clothing. In addition, PCM can give them mild environment condition such suitable temperature control or humidity. To fabrics, the PCM has various methods such as microcapsule, padding and modified cross-section formation(Sheath/core). Sheath core PCM fabric has a better benefit of durability than other method. However, PCM sheath/core spinning is difficult. In addition, dyeing property is important to use clothing industry due to visual images. In this study, we investigated dyeing properties of Nylon/PCM sheath/core fabrics. Especially, we observed the relation between dyeing property and PCM including ratio. Various temperature and pH conditions were also studied to optimize dyeing properties as acid dye.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.7
• /
• pp.590-600
• /
• 2012

In this research, generalized sizing methods were studied that can be applied to an aircraft which uses solar cell or fuel cell as energy sources. To consider multiple propulsion systems and energy resources, multiple power paths were modeled and the weight of consumable and non-consumable energy was reflected in the weight change calculation for each mission segments. In the constraint analysis, power to weight ratio was selected instead of thrust to weight ratio and used in the sizing process of balancing power and energy.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.5
• /
• pp.473-479
• /
• 2013

This study focused on a heavy-duty natural gas engine fuelled with HCNG (CNG: 70 vol%, hydrogen: 30 vol%) and CNG. To study the emission characteristics of an HCNG engine with high compression ratio, the exhaust gas of CNG and HCNG fuel were analyzed in relation to the change in the compression ratio at the half load condition. The results showed that the thermal efficiency improved with an increase in the compression ratio. Consequently, $CO_2$ emission decreased. CO emission increased with inefficient oxidation due to the low exhaust gas temperature. $NO_x$ emission with high compression ratio was increased at the same excess air ratio condition. However, $NO_x$ emission was not affected by a compression ratio exceeding ${\lambda}$ = 1.9 because of the same MBT timing.

• Structural Engineering and Mechanics
• /
• v.54 no.2
• /
• pp.239-256
• /
• 2015

An adaptive-scale damage detection strategy based on a wavelet finite element model (WFEM) for thin plate structures is established in this study. Equations of motion and corresponding lifting schemes for thin plate structures are derived with the tensor products of cubic Hermite multi-wavelets as the elemental interpolation functions. Sub-element damages are localized by using of the change ratio of modal strain energy. Subsequently, such damages are adaptively quantified by a damage quantification equation deduced from differential equations of plate structure motion. WFEM scales vary spatially and change dynamically according to actual needs. Numerical examples clearly demonstrate that the proposed strategy can progressively locate and quantify plate damages. The strategy can operate efficiently in terms of the degrees-of-freedom in WFEM and sensors in the vibration test.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.668-671
• /
• 2001

For the saving of energy consumption, it is necessary that the high efficient energy transfer machine. We found the optimum operating condition of screw water chiller during this performance test. The specifications of compressor for this performance test are as follows. Built-in volume ratio; Vi=2.4, using refrigerant; HCFC-22, nominal motor output; 60kW(80Hp). We found the test results on water cooled chiller standard test condition that the evaporating capacity is increased 8% maximum and 5.6% under same operating condition. and COP is increased 11 % max. and 8% under same operating condition with change of the evaporating inlet/outlet condition. For the results of these test, we can estimate the optimum operating condition of water cooled type screw chiller.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.21-23
• /
• 2002

We designed and manufactured helical magnetic flux compression generator, in which, the current density was reduced by increasing the number of wires by stages, and the voltage between wires was reduced by decreasing the time rate of inductance change. The figure of merit and the energy multiplication ratio of the generator were measured as a function of current density flowing through coil and their characteristics were analyzed. When the current density of coil was more than 250 kA/cm, the figure of merit and the energy multiplication ratio were decreased rapidly.

• Korean Journal of Organic Agriculture
• /
• v.9 no.3
• /
• pp.23-44
• /
• 2001

To address complex solutions to tack1e the cost rise with the increasing of the prices of crude oil, and to lower warming gas discharge in agricultural sector in line with the framework Convention on Climate Change, we need to net only develop the methods of simply reducing energy use ratio, but also effectively energize resources discharged in the course of agricultural production aimed at enabling repealed farming, and develop systems to reinvest such energy into agricultural production and apply them to actual farming. To that end, specifically, we need to reduce the energy cost in agricultural production, and produce and harness bio gas that makes it possible to stabilize the continued supply of energy. Thus, in this research, we seek to discuss energy use volume and warming gas discharge, and the characteristics of bio gas and its use methods alike, in agricultural sector, and thus present methods for environment-friendly and continual development in agriculture.