• Nuclear Engineering and Technology
• /
• 제41권5호
• /
• pp.709-714
• /
• 2009

An ion implanter, which can serve as a metal-ion supply, has been constructed and performance tested. Copper ions are generated and extracted from a Bernas ion source with a heating crucible that provides feed gases to sustain the plasma. Sable arc plasmas can be sustained in the ion source for a crucible temperature in excess of $350^{\circ}C$. Stable extraction of the ions is possible for arc Currents less than 0.3 A. Arc currents increase with the induced power of a block cathode and the transverse field in the ion source. $Cu^+$ ions in the extracted beam are separated using a dipole magnet. A $20{\mu}A$ $Cu^+$ ion current can be extracted with a 0.2 A arc current. The ion current can support a dose of $10^{16}ions/cm^2$ over an area of $15\;cm^2$ within a few hours.

• 동력기계공학회지
• /
• 제19권1호
• /
• pp.76-82
• /
• 2015

An analysis model is developed using a commercial software 'simulationX' for designing hydraulic-pneumatic system of heave compensator for offshore drilling operations. Reliability verification of the analysis model for the test equipment of 1/5 scale compensator was conducted by comparing test results and simulation results. An analysis of full scale heave compensator is developed on the basis of verified a model. Then, the results of simulation were analyzed to obtain following conclusion. The displacement of crown block about excitation input amplitude (${\pm}3,000mm$) of the steward platform using a 'simulationX' is attenuated under ${\pm}35mm$, and the compensation rate is 98.7%. In this study, goal of a compensation rate is more than 95%. The previously results are satisfied with the objectives of compensation rate.

• 한국디지털건축인테리어학회논문집
• /
• 제13권2호
• /
• pp.35-43
• /
• 2013

The green building is one of biggest factors to go the goal of energy saving and environmental conservation, "reduction of energy consumption, friendly energy technology, recycling of resource, and environmental pollution reduction technology. The purpose of these green buildings realized by the energy-saving technology such as the thermal bridge breaker(or thermal bridge block). Thermal bridges are localized elements that penetrate insulated portions of building envelope that results in heat loss. The purpose of this paper is to describe the technical interactions for patents of a thermal bridge breaker(TTB) used in green building practices, and be subject to investigation to TTB in the leading countries, that is, United State, Europe Union, Japan, and Korea. As a result, there are four TTB categories(roof, wall-slab connection, opening, footing) in house or building. The TTB categories is remarkable technology that is apparatus in slab-wall joints and sealing element of opening frame in walls.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.199-201
• /
• 2002

Cancer therapy using high-energy $^{12}$ C ions is successfully under way at HIMAC, Japan. An alternative beam to $^{12}$ C is $^{11}$ C ions. The merit of $^{11}$ C over $^{12}$ C is its capability for monitoring spatial distribution of the irradiated $^{11}$ C by observing the $\beta$$^{+}$ decay with a good position resolution. One of the several problems to be solved before its use for therapy is the amount of nuclear interaction that deteriorates the dose concentration owing to the Bragg curve. Utilizing the dedicated secondary beam course for R&D studies at HIMAC, we measured the total energy loss of $^{11}$ C ions in a scintillator block that simulates the soft tissue in human bodies. In addition to the total absorption $^{11}$ C peak, non-negligible bump-shaped contribution is observed in the energy spectrum. The origin of the bump contribution can be nuclear interaction of the incident $^{11}$ C ions with hydrogen and carbon atoms. Further studies to reduce the ambiguity in dose distribution are mentioned.

• Journal of Communications and Networks
• /
• 제9권3호
• /
• pp.265-273
• /
• 2007

This paper expands an analytical performance model of 802.11 to accurately estimate throughput and energy demand of 802.11-based wireless sensor network (WSN) when sensor nodes employ Reed-Solomon (RS) codes, one of block forward error correction (FEC) techniques. This model evaluates these two metrics as a function of the channel bit error rate (BER) and the RS symbol size. Since the basic recovery unit of RS codes is a symbol not a bit, the symbol size affects the WSN performance even if each packet carries the same amount of FEC check bits. The larger size is more effective to recover long-lasting error bursts although it increases the computational complexity of encoding and decoding RS codes. For applying the extended model to WSNs, this paper collects traffic traces from a WSN consisting of two TIP50CM sensor nodes and measures its energy consumption for processing RS codes. Based on traces, it approximates WSN channels with Gilbert models. The computational analyses confirm that the adoption of RS codes in 802.11 significantly improves its throughput and energy efficiency of WSNs with a high BER. They also predict that the choice of an appropriate RS symbol size causes a lot of difference in throughput and power waste over short-term durations while the symbol size rarely affects the long-term average of these metrics.

• 전기전자학회논문지
• /
• 제27권4호
• /
• pp.411-417
• /
• 2023

무인 항공기(UAV) 지원 중계는 분포가 쉽고 통신 채널이 양호하며, 이동성이 뛰어나 기존 지상 중계에 비해 높은 무선 연결성을 가질 수 있다. 본 논문에서는 무선 주파수(RF) 대역을 활용하여 소스로부터 에너지를 수확하고 테라헤르츠(THz) 대역을 활용하여 2차 송신기와 해당 수신기 간에 정보를 전송할 수 있는 UAV 지원 중계 네트워크를 설계한다. 그 후, 릴레이 채널 용량을 최대화하는 UAV의 최적 위치를 결정하기 위한 최적화 문제의 해를 유도하고, 유도된 해를 활용하여 두 가지 UAV 궤적(직선 궤적과 타원 궤적)을 설계하는 알고리즘을 제안한다. 시뮬레이션 결과, 제안된 알고리즘은 UAV 직선 궤도가 수확된 에너지 및 채널 용량 측면에서 더 나은 시스템 성능을 제공할 수 있음을 보여준다.

• 한국수소및신에너지학회논문집
• /
• 제16권2호
• /
• pp.103-110
• /
• 2005

Proton conducting solid polymer electrolyte (SPE) membranes have been used in many energy technological applications such as water electolysis, fuel cells, redox-flow battery, and other electrochemical devices. The availability of stable membranes with good electrochemical characteristics as proton conductivity at high temperatures above 80 $^{\circ}C$ and low cost are very important for its applications. However, the presently available perfluorinated ionomers are not applicable because of high manufacturing cost and high temperature use to the decrease in the proton conductivity and mechanical strength. In order to make up for the weak points, the block copolymer (BPSf) of polysulfone and poly (phenylene sulfide sulfone) were synthesized and sulfonated. The electrolyte membranes were prepared with phosphotungstic acid (HPA)/sulfonated BPSf via solution blending. This study would be desirable to investigate the interaction between the HPA and sulfonated polysulfone. The results showed that the characteristics of SPSf/HPA blend membrane was a better than Nafion at high temperature, 100 $^{\circ}C$. These membranes proved to have a high proton conductivity, $6.29{\times}10-2$ S/cm, a water content, 23.9%, and a ion exchange capacity, 1.97 meq./g dry membrane. Moreover, some of the membranes kept their high thermal and mechanical stability.

• 대한환경공학회지
• /
• 제30권9호
• /
• pp.955-960
• /
• 2008

본 연구는 전자빔 공정에서 실험계획법(design of experiment: DOE) 중 일반요인배치법(general factorial design)을 이용하여 2개 인자(X$_1$: benomyl concentration(mg/L), X$_2$: E-beam irradiation(Gy))를 토대로 요인(X$_1$: benomyl concentration) 1에서 3개 수준(3 level: 0.5, 1 및 1.5 mg/L)와 요인(X$_2$: E-beam irradiation) 2에서 6개 수준(6 level: 100, 800, 600, 400, 200 및 100 Gy)으로 구성된 3블록(block) 실험조합에 따라 Benomyl의 분해(Y$_1$: the % of decomposition), 무기화(Y$_2$: the % of materialization) 및 독성평가(acute toxicity assessment)를 수행하였다. 우선 HPCL 분석에 의한 Benomyl에 분해특성은 처리조합(treatment combination) 3 블록(block)의 17 및 18번을 제외한 모든 실험조건에서 100% 분해되었고 등분산(equal variance) 조건에서 일원분산분석(one-way ANOVA)결과 수준 간 유의한 차이가 없었다(p > 0.05). 전자빔 조사에 의한 Benomyl에 무기화(materialization) 특성은 각 3개의 처리조합에서 평균 46%, 36.7% 및 22%의 제거효율을 나타났고 각 조합에서 처리수준 간 예측식은 block 1(Y$_1$ = 0.024X$_1$ + 34.1(R$^2$ = 0.929)), block 2(Y$_2$ = 0.026X$_2$ + 23.1(R$^2$ = 0.976)) 및 block 3(Y$_3$ = 0.034X$_3$ + 6.2(R$^2$ = 0.98)) 등의 1차 선형 회귀식을 만족하였다. 또한 Benomyl에 무기화(materialization)에 대한 Anderson-Darling 검정을 이용한 정규성(normality)을 만족하였다(p > 0.05). 또한 무기화에 대한 반응에 대한 선형 및 비선형을 포함한 다중회귀분석(multi regression analysis)을 도출한 결과 다음과 같은 예측식 Y = 39.96 - 9.36X$_1$ + 0.03X$_2$ - 10.67X$_1{^2}$ - 0.001X$_2{^2}$ + 0.011X$_1$X$_2$(R$^2$ = 96.3%, Adjusted R$^2$ = 94.8%)을 도출하였다. 2가지 반응변수(X$_1$: benomyl concentration(mg/L), X$_2$: E-beam irradiation(Gy))에 의한 2차 반응표면 모형식 추정으로부터 정준분석을 통해 최적조건을 도출한 결과 Benomyl 초기농도(X$_1$) 0.55 mg/L, 전자빔 조사량 950 Gy에서 TOC 제거율 57.3%으로 나타났다. 마지막으로 V. fischeri를 이용한 MicrotoxTM modified 81.9% test을 이용하여 전자빔에 의한 Benomyl에 대한 급성 독성을 평가한 결과 전자빔 조사전 block 1의 0.5 mg/L에서 10.25%, block 2의 1 mg/L에서 20.14% 및 block 3의 1.5 mg/L에서 26.2%의 생물학적 방해(inhibition)작용이 발생하였으나 전자빔 조사 후 모든 조건에서 생물학적 방해영향을 나타나지 않았다.

• Current Photovoltaic Research
• /
• 제9권2호
• /
• pp.45-50
• /
• 2021

Agrovoltaic system is a concept that combines agriculture and photovoltaic (PV) system by applying a PV system to the upper part of farmland. In this study, we developed a folding drive system for an agrophotovoltaic (agroPV) module (150 Wp/4×9 cell) exclusively for pear farming with 10 kW capacity. The system was installed in 2018, and the growth characteristics and quantity of pears under the agroPV folding system have been investigated for 2 years. We found that thare is no differences of the characteristics of pears grown under the agroPV system compared to the pears grown without the system (control) except the percutaneous color L of pear. However, the weight and sugar content of the pear grown under the agroPV system were decreased by 4.5% and 1.3°Bx compared to that of the control, respectively. We assume that this is mainly due to the influenced of the delay in flowering as upper PV module block some of sunlight. However, interestingly, when we deleyed the pear harvesting by 2 weeks, the weight of pears increased by 8.5% and they became nearly the sample as the control pears harvested 2 week earlier. In addition, we also found that the agroPV modules decrease the fall rate of pear when the typoon struck, also it mitigates cold damage by 38% during April by protecting from frost. In conclusion, it can be said that the agroPV system help to protect target crops from the environmental conditions and the quality of the crops are similar to the that of control.

• ETRI Journal
• /
• 제26권6호
• /
• pp.513-519
• /
• 2004

This paper presents a low power 16-bit adiabatic reduced instruction set computer (RISC) microprocessor with efficient charge recovery logic (ECRL) registers. The processor consists of registers, a control block, a register file, a program counter, and an arithmetic and logical unit (ALU). Adiabatic circuits based on ECRL are designed using a $0.35{\mu}m$ CMOS technology. An adiabatic latch based on ECRL is proposed for signal interfaces for the first time, and an efficient four-phase supply clock generator is designed to provide power for the adiabatic processor. A static CMOS processor with the same architecture is designed to compare the energy consumption of adiabatic and non-adiabatic microprocessors. Simulation results show that the power consumption of the adiabatic microprocessor is about 1/3 compared to that of the static CMOS microprocessor.