• Nuclear Engineering and Technology
• /
• 제42권6호
• /
• pp.690-703
• /
• 2010

Sampling based uncertainty analysis was carried out to quantify uncertainty in predictions of best estimate code RELAP5/MOD3.2 for a thermal hydraulic test (10% hot leg break LOCA) performed in the Large Scale Test Facility (LSTF) as a part of an IAEA coordinated research project. The nodalisation of the test facility was qualified for both steady state and transient level by systematically applying the procedures led by uncertainty methodology based on accuracy extrapolation (UMAE); uncertainty analysis was carried out using the Latin hypercube sampling (LHS) method to evaluate uncertainty for ten input parameters. Sixteen output parameters were selected for uncertainty evaluation and uncertainty band between $5^{th}$ and $95^{th}$ percentile of the output parameters were evaluated. It was observed that the uncertainty band for the primary pressure during two phase blowdown is larger than that of the remaining period. Similarly, a larger uncertainty band is observed relating to accumulator injection flow during reflood phase. Importance analysis was also carried out and standard rank regression coefficients were computed to quantify the effect of each individual input parameter on output parameters. It was observed that the break discharge coefficient is the most important uncertain parameter relating to the prediction of all the primary side parameters and that the steam generator (SG) relief pressure setting is the most important parameter in predicting the SG secondary pressure.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.465-465
• /
• 2011

In recent years, electrochemical supercapacitors have attracted much attention due to their high power density, long life cycles, and high efficiency. Some supercapacitors using CNTs have been reported, but there are several issues to be resolved for further development of CNT based supercapacitors. One issue is time consuming procedures to prepare CNT films, which may provide poor control of CNT uniformity over the large area of the substrates. Another is new electrolytes replacing the conventional liquid electrolytes in supercapacitors. In this work, We have successfully demonstrated that spray deposition method of multiwalled CNT films using gel electroytes could be promising for CNT-based supercapacitors on ITO substrates. Specific capacitances using gel electrolyte reached up to 1.5 F/g and 9 mF/$cm^2$, and internal resistance was 28 ${\Omega}$. Specific capacitances and internal resistance of supercapacitors with gel electrolyte were better than or comparable to those with liquid electrolytes($KNO_3$, $Na_2SO_4$), indicating that gel electrolytes could replace liquid counterparts in CNT-based supercapacitors. Combined with gel electrolyte, spray deposition method could provide low cost and easily scalable process for high performance supercapacitors using CNT films on ITO for applications in display devices.

• 태양에너지
• /
• 제12권1호
• /
• pp.15-24
• /
• 1992

태양열이용 LiBr-water 흡수식 냉난방시스템의 시간단위의 simulation model을 SuperCalc spreadsheet를 사용해서 제시하였고 전체시스템의 열성능을 분석함으로써 spreadsheet simulation 방식의 가치를 입증하였다. Arizona, Tucson에 위치한 사무실형 건물의 시간단위의 냉난방 부하를 ASHRAE 방식에 의하여 계산하였으며 전체 시스템의 구성요소 및 제어 방식에 대한 알고리즘을 제시하였다. 두 종류의 흡수식 시스템의 열성능을 시스템 매개변수를 이용해서 비교하였다.

• 한국정보통신학회논문지
• /
• 제10권8호
• /
• pp.1380-1385
• /
• 2006

Pipelined Tone Wakeup(PTW) 구조(1)는 패킷 전송에 있어서 비동기 wakeup 파이프라인을 제공을 통하여 wakeup 절차를 중복함으로써 센서 네트워크에서 에너지 절약과 종단간의 지연을 지원하기 위해 제안되었다. 그러나 PTW 구조는 2개의 radios를 사용하고 에러가 없는 환경을 가정한다. 본 논문에서는 전송 노드와 수신 노드사이에 주고 받는 패킷의 적은 수정을 통하여 지연 및 에너지 절약을 얻을 수 있는 수정된 PTW 구조를 제안한다.

• 경영과학
• /
• 제31권1호
• /
• pp.41-48
• /
• 2014

This study presents a bottom-up approach for analyzing greenhouse gas (GHG) emissions for the shipbuilding industry in Korea. The overall procedures for deriving GHG emissions from the Korean shipbuilding industry are presented. Based on the long-term forecast on energy demands of the Korean shipbuilding industry, reference energy system (RES) and energy balance (EB) for the shipbuilding process are derived for bottom-up modeling.

• 대한소아치과학회지
• /
• 제23권3호
• /
• pp.631-639
• /
• 1996

Electrosurgical technique have been used in dentistry as an aid to soft tissue management for nearly 60 years. However, it was not until the late 1960s that the principles of electrosurgery were understood and improved equipment became available. Electrosurgery is a surgical procedure performed on soft tissue utilizing controlled high frequency electricaI(radio-frequency) currents in the range of 1,500,000 to 7,500,000 cyclesper second. The radio-frequency energy used in electrosurgery is able to cut and coagulate tissue because it focuses the energy at the small, active electrode. Advantages of electrosurgery for soft-tissue management during dental procedures include improved hemostasis, ease of tissue modification, improved visibility and so on, but adverse healing responses-including necrosis of soft tissue and sequestration of alveolar bone-have been reported. The present report provides examples of treatment of soft tissue and pulp tissue of primary teeth by electrosurgery. The results are as follows; 1. Electrosurgical techniques can be used for various procedures in pedodontics. 2. Electrosurgical procedures provide improved hemostasis and visibility in the operating field, which enable to remove, reshape, and contour soft tissues easily. 3. In pulpotomy technique, it was difficult to expect the variable pulpal response based on the degree of heat accumulation and the conditions of pulp tissues. Therefore, electrosurgical pulpotomy could not be considered as a method superior to formocresol pulpotomy. 4. A greater degree of dexterity and experiences in manipulation of the electrode is required compared with the conventional scalpel surgery.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제11B권3호
• /
• pp.104-111
• /
• 2001

The design procedures and experimental results of a single-stage electronic ballast using half-bridge resonant inverter are presented in this paper. The proposed topology is based on a single-stage ballast which combines a boost converter and a half-bradge series resonant inverter. High power factor is achieved by using the boost semi-stage operating in discontinuous conduction mode and inverter semi-stage operated above resonant frequency to provide zero voltage switching is empolyed to ballast the fluorescent lamp Experimental results from the ballast system with 36W fluorescent

• Bulletin of the Korean Chemical Society
• /
• 제10권2호
• /
• pp.185-190
• /
• 1989

Geometries for a number of representative ${\beta}$ -lactam antibiotics (penams, cephems and monobactams) have been calculated by computer graphics/molecular mechanics energy minimization procedures using both MM2 and AMBER force fields. The calculated geometries have been found in reasonable agreement with the geometries reported in the X-ray crystal structures, especially in terms of the pyramidal character of the amide nitrogen in the ${\beta}$-lactam ring and the Cohen distance. Based on these calculations, it is suggested that the nitrogen atom in the monobactams may also have pyramidal geometries in the biologically active conformations.

• 한국환경교육학회지:환경교육
• /
• 제7권1호
• /
• pp.46-87
• /
• 1994

Our country has been consuming a huge amount of energy in the course of industrialization and its demand is expected to increase enormously in the future. However, the deposits of energy resources are so limited that the settlement of energy problem comes up the essential subject. To solve the energy problem, it is requested that new resources to gain energy stably should be developed and also energy should be economized and used effectively. The effective use of energy and an the wisdom of economy in energy are requested to everybody and these things should be habitualized from very young age through education. Nevertheless, almost every school in our country hasn’t been concerned about energy education. Even though they have a concern, they are very short of the energy education materials and the quality of the materials is not so good. Therefore it is very meaningful to the settlement of energy problem of the country to make the students who will lead our country to make the students who will lead our country in the future realize the seriousness of energy problem and to provide them the necessary knowledge and methods to solve this problem so that they practice those things in everyday life. Having these necessities, this research, supported by The Korea Energy Management Corporation(KEMCO), was performed for 8 months from April 17, 1994 to December 17, 1994. Many peoples participated in this study such as 30 staffs of researchers and authors, 5 staffs of photographers and illustrators, and 3 VCR program producers developing an energy education material set for middle school students that includes a printed material for student, a diskette for computer simulation, a teacher's guidebook, VCR material and its guidebook. The following main development direction was established : First, the material for student should be consisted of units that let students know the seriousness of energy problem. Second, the focus should be put on the necessary method and practice to economize energy actually in real life based on the basic knowledge learned in elementary school. Third, material for student should be consisted of modules to be student activity-oriented teaching-learning rather than lecture-oriented one. The activity, to maximize student's interests, should be presented in various forms such as experiments, investigation, play, data interpretation, computer simulation, visits, expression and appreciation, etc. To develop the energy education materials for middle school students, a research plan was made first. After literature review about domestic and foreign energy education materials, several research trips home and abroad, and discussion meetings, the basic theory of energy education such as the principle, objective, contents, teaching-learning method, and evaluation method was established. Material for student was developed through the following procedures : The activities in the existing energy education materials were analysed and were divided into four categories related to energy using places of home, school, community, and country, and which were again divided into three categories related to time of past, present, and future, Considering these division, nine modules which are structure units of material for student were chosen, Each module comprises 2-4 activities. Totally 31 activities were designed in this way. The syllabi were made out for each activity and writing was asked for to experts related to each activity after several discussions and revision. To complement the draft, another several discussions and revision were also made on it and then pictures and illustrations were asked for. All these procedures complete the material for student, titled ; Energy Inquiry of Middle School Students', which totals 129 pages and is all in color. As the manuscript of material for student was fixed, writing for teacher's guidebook was asked for to the same writers. The draft of teacher's guidebook was also complemented through the several concentrated works and discussions. Teacher's guidebook focused on the teaching-learning principle and methods of energy education and on the concrete instruction cases for effective instruction of material for student. It is organized with two parts : the one is 'general outline' which introduces theoretical contents and the other is 'details' which are practically helpful to teaching-learning. It is totally 131 pages including both 'general outline' and 'details'. The VCR material and its guidebook consist of contents that cultivate the good attitude trying to economize energy and raise student's interests with a purpose of strong motivation to recognize the necessity of economy and practice it. After establishing development direction of VCR material through discussion meetings and research trips, its script was made by relevant experts. Then the script was also reviewed two times. The drafted VCR material made by a video material developing expert was examined and modified by previews twice. After completion of VCR material, the VCR guidebook was made. All these procedures led to the development of VCR material which runs 20 minutes in VHS type. The VCR guidebook shows a production purpose of the program, structure of contents, evaluation methods, and contents of the program in detail to give help to instructors when they use this VCR material, When these energy education materials are used, it is desirable that the VCR material should be presented first to induce student's motive, and then material for student is introduced Since the material for student is composed of activity-oriented modules and each module is independent one another in general, and each activity is, too. the necessary module or activity can be chosen and utilized in any order according to school or class conditions. This energy education materials will contribute to the development of student's ability to solve energy problem in everyday life and teacher's ability to teach the fundamental knowledge and method in solving energy problem.

• 에너지공학
• /
• 제23권4호
• /
• pp.150-159
• /
• 2014

2020년을 목표로 한 국내 중기 온실가스 감축목표가 2009년에 발표된 이후 다양한 온실가스 방안들이 제시되고 있다. 장기적인 온실가스 감축 정책들을 체계적으로 평가하기 위해 대부분의 국가에서는 상향식 모형 또는 하향식 모형이 이용이 되고 있다. 본 연구에서는 상향식 모형의 일반적인 현황 및 적용방안에 대해서 알아보고, 또한 가장 많이 사용되는 LP를 이용한 상향식 모형에 대한 이론적 고찰을 수행하였다. 특히 새롭게 제시된 단순화된 LP 정식화를 제시하기 위해, 의사결정변수 분석, 목적함수에 대한 분석, 기본적인 제약식인 흐름보존제약 및 용량제약에 대한 보다 간결한 정식화를 제시하고 있으며, 다양한 시나리오나 정책의 효과를 LP에 포함시킬 수 있도록 선형제약식을 만드는 방법도 제시하고 있다.