• Medical Lasers
• /
• 제9권1호
• /
• pp.34-38
• /
• 2020

Recently, various lasers and energy-based devices (EBDs) have been widely used in aesthetic procedures. Although using lasers and energy-based aesthetic procedures presents a potential risk to doctors, nurses, and patients, aesthetic procedures tend to be performed without the necessary precautions. For injury prevention, it is essential to follow safety rules and be aware of potential accidents. Furthermore, it is important to understand the basic principles of the devices, including the different optical and electrical properties. Acquiring the exact knowledge to control a device is important for two reasons; to maintain a safer operating environment and prolong the lifespan of expensive devices. This review briefly summarizes the knowledge needed for better and safer aesthetic procedures and the proper control of aesthetic devices.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.272-277
• /
• 1995

The current direction of emergency procedures for CANDU reactors is reviewed and compared based on scope, methodology and format preponderantly, and an attempt is made to integrate these procedures. As a result, a recommendation for Wolsong 2, 3 & 4 emergency procedures is presented as event-specific procedures, generic procedure and whose format is combination of logic diagram and technical basis document.

• Journal of Radiation Protection and Research
• /
• 제49권1호
• /
• pp.1-18
• /
• 2024

Exponential growth has been observed in nuclear medicine procedures worldwide in the past decades. The considerable increase is attributed to the advance of positron emission tomography and single photon emission computed tomography, as well as the introduction of new radiopharmaceuticals. Although nuclear medicine procedures provide undisputable diagnostic and therapeutic benefits to patients, the substantial increase in radiation exposure to nuclear medicine patients raises concerns about potential adverse health effects and calls for the urgent need to monitor exposure levels. In the current article, model-based internal dosimetry methods were reviewed, focusing on Medical Internal Radiation Dose (MIRD) formalism, biokinetic data, human anatomy models (stylized, voxel, and hybrid computational human phantoms), and energy spectrum data of radionuclides. Key results from many articles on nuclear medicine dosimetry and comparisons of dosimetry quantities based on different types of human anatomy models were summarized. Key characteristics of seven model-based dose calculation tools were tabulated and discussed, including dose quantities, computational human phantoms used for dose calculations, decay data for radionuclides, biokinetic data, and user interface. Lastly, future research needs in nuclear medicine dosimetry were discussed. Model-based internal dosimetry methods were reviewed focusing on MIRD formalism, biokinetic data, human anatomy models, and energy spectrum data of radionuclides. Future research should focus on updating biokinetic data, revising energy transfer quantities for alimentary and gastrointestinal tracts, accounting for body size in nuclear medicine dosimetry, and recalculating dose coefficients based on the latest biokinetic and energy transfer data.

• Nuclear Engineering and Technology
• /
• 제27권4호
• /
• pp.571-581
• /
• 1995

원자력 발전소의 비상운전절차서는 작성단계부터 난점이 많이 있고, 작성된 절차서를 착인 및 검증하는 데에도 많은 어려움이 따른다 캐나다의 원자력 규제기관인 AECB에서도 원자력발전소의 운전 허가를 받는 데 있어 발전소 비상운전 절차서를 하나의 요구조건으로 삼고 있는데, 그 요구조건은 발전소 내외의 비상상황에 대처하기 위한 상세한 계획 및 절차를 개발하는 것이다. 본 보고서에서는 미국의 원자력 발전소 비상운전 계획을 참고하고 있는 캐나다 원자력 발전소용 비상운전절차 표준지침서를 검토하고, 캐나다 비상운전 절차서 들의 현재 경향을 알아보았으며, 캔두형 발전소들의 비상운전 절차를 사고의 범위(개별적인 사고의 종류 지정), 사고진단 방법(사건 대응적, 징후 대응적, 또는 이 두 가지 방법의흔합형), 절차서 형식 등을 중점으로 비교 검토하고, 각 절차서의 내용을 포괄적으로 종합하여 현재 건설중인 월성 원자력 발전소 2, 3, 4호기용 비상운전절차서의 기본방향을 징후 대응적절차서(사고진단이 안될 경우 사용)와 논리도표와 문장이 혼합된 형식의 사건파악적절차서로 이루어진 비상운전절차서로 제시하였다.

• Structural Engineering and Mechanics
• /
• 제51권4호
• /
• pp.531-546
• /
• 2014

In this paper the extension of a recently established energy-based pushover procedure in order to include the higher mode contributions to the seismic response of structures is presented and preliminary evaluated. The steps of the proposed methodology in its new formulation are quite similar to those of the well-known Modal Pushover Analysis. However, the determination of the properties of the 'modal' equivalent single-degree-of-freedom systems is achieved by a rationally founded energy-based concept. Firstly, the theoretical background and the assumptions of the proposed methodology are presented and briefly discussed. Secondly, the sequence of steps to be followed for its implementation along with the necessary equations is systematically presented. The accuracy of the methodology is evaluated by an extensive parametric study which shows that, in general, it provides better results compared to those produced by other similar procedures. In addition, the main shortcoming of the initial version of the methodology now seems to be mitigated to a large extent.

• 대한후두음성언어의학회지
• /
• 제32권3호
• /
• pp.118-123
• /
• 2021

The pulsed photoangiolytic 532-nm potassium-titanyl-phosphate (KTP) laser has emerged in recent years as an efficacious treatment modality for vocal fold lesions. It also has broadened the indications for other laryngeal laser surgery. Features of KTP laser that it is a fiber-based delivery system and its energy is selectively absorbed by oxyhemoglobin make it suitable for office-based laryngeal procedures. An office-based KTP laser surgery provides an alternative management option for benign laryngeal diseases and can be performed comfortably under flexible endoscopic guidance which is placed through the nose of a fully awake patient. Office-based laryngeal surgery with a KTP laser can alleviate the need for general anesthesia. However, there are some limitations to apply due to reduced visual precision and the fact that the vocal folds are moving during procedures. Clinicians should carefully weigh the advantages and disadvantages of office-based procedures before a treatment option is selected. Patient selection and standardized laser energy parameters may help in decreasing complications and improving the treatment results.

• Computers and Concrete
• /
• 제19권6호
• /
• pp.689-699
• /
• 2017

An energy-based approach for determining earthquake safety of reinforced concrete frame structures is presented. The developed approach is based on comparison of plastic energy capacities of the structures with plastic energy demands obtained for selected earthquake records. Plastic energy capacities of the selected reinforced concrete frames are determined graphically by analyzing plastic hinge regions with the developed equations. Seven earthquake records are chosen to perform the nonlinear time history analyses. Earthquake plastic energy demands are determined from nonlinear time history analyses and hysteretic behavior of earthquakes is converted to monotonic behavior by using nonlinear moment-rotation relations of plastic hinges and plastic axial deformations in columns. Earthquake safety of selected reinforced concrete frames is assessed by using plastic energy capacity graphs and earthquake plastic energy demands. The plastic energy dissipation capacities of the frame structures are examined whether these capacities can withstand the plastic energy demands for selected earthquakes or not. The displacements correspond to the mean plastic energy demands are obtained quite close to the displacements determined by using the procedures given in different seismic design codes.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.476-481
• /
• 2001

In this paper, based on the developed dynamic model of a vacuum circuit breaker mechanism, the development of the new circuit breaker with less energy mechanism is focused. The energy flow analysis of the original mechanism is carried out to show where the elastic potential energies of pre-loaded springs are transmitted. Through energy flow analysis, the concept design of the new circuit breaker with less energy mechanism is proposed, and then the detailed design is carried out through the design process based on the verified dynamic model. Comparing simulation results with experiment using a high-speed camera, the appropriateness of the proposed design procedures for the rapid circuit breaker mechanism is shown.

• Earthquakes and Structures
• /
• 제13권2호
• /
• pp.131-136
• /
• 2017

This paper concerns two new analytical approaches for solving high nonlinear vibration equations. Energy Balance method and Hamiltonian Approach are presented and successfully applied for nonlinear vibration equations. In these approaches, there is no need to use small parameters to solve and only with one iteration, high accurate results are reached. Numerical procedures are also presented to compare the results of analytical and numerical ones. It has been established that, the proposed approaches are in good agreement with numerical solutions.

• 신재생에너지
• /
• 제18권4호
• /
• pp.54-63
• /
• 2022

This study compared and analyzed major policies and operational processes of countries that introduced the Renewable Energy Plan Site, through literature analysis of published governmet data, and previous research results. The procedures of the Renewable Energy Plan Site were classified into planned location designations, selection of power generation business operators, designation of the business' district and development and evaluating the factors derived for each procedure. Four contries were selected to be compared and analyzed, namely: Denmark, Germany, the United Kingdom and Japan. This was based on the criteria used to introduce and operate the Renewable Energy Plan Site, activate renewable energy supply and check the applicability of Korea's policies. It was analyzed that the priority of the planned location for the procedure was different for each country depending on the conditions there.