• Journal of the Korean Society of Food Culture
• /
• v.25 no.1
• /
• pp.100-107
• /
• 2010

This study was performed to compare the dietary intake and food sources of zinc (Zn), using a database of Zn composition developed in this study, between elementary schoolchildren in a remote rural area (RA, n=58, $9.9{\pm}1.7\;yrs$) and those in an urban area (UA, n=60, $9.4{\pm}1.8\;yrs$) in Chungnam province in Korea. A dietary survey for three days by food record method was performed. All kinds of foods (n=273) consumed by subjects were collected by aliquot sampling method, and the Zn content of these foods were analyzed by wet technique. The results showed that the daily mean intakes of energy, calcium, iron, and vitamin C from diet in the RA were in the range of 49-88% of the Korean DRI (KDRI), while those in the UA were similar to or greater than the KDRI, except for calcium and iron. The daily mean intake of Zn from the RA diet was $7.0{\pm}0.5\;mg/d$ ($114.1{\pm}8.4%$ of the KDRI), and $16.0{\pm}1.0\;mg/d$ ($258.3{\pm}16.3%$ of the KDRI) in that of the UA (p<0.001). The percentage of dietary intake of Zn less than 2/3 of the KDRI was 19.0% in the RA, in comparison to 1.7% in the UA. Those in the RA consumed Zn from plant foods more often than did those in the UA (p<0.001). Beef rib stew was the food source with highest Zn amount for the total subjects, followed by beef rib meat, roasted; and beef soup w/seasoned red pepper sauce. These results showed that some children in the RA had poor Zn nutrition based upon low intakes and poor food sources of Zn, while overall, children in the UA had good Zn nutrition. Therefore, those in RAs should have their Zn nutrition improved through government policy and nutrition education.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.7
• /
• pp.69-76
• /
• 2023

Cavity causes settlement and its remediation after an accident results in significant time and economic losses. This study aims to experimentally evaluate the prospect of using infrared camera to detect and measure underground subsidence. Emissivity is necessary to detect the energy emitted from an object and accurately assess temperature using an infrared camera. The emissivity in laboratory tests is fixed to evaluate a reasonable distance between the infrared camera and the object, and temperature values are assessed at various distances. In field experiments, the cavity of the field experiment is simulated using a PVC pipe with a diameter of 5 cm, artificially buried at depths of 5 and 25 cm from the surface. The infrared camera measurements are taken from 4 PM to 3 PM of the next day (a total of 23 h). The analysis included the time-series temperature distribution and the cooling rate index assessment, which represents the temperature change rate per unit of time. The results showed that various temperature trends are observed depending on the location of the subsidence. This study demonstrates that the infrared camera can be used to assess the condition of the subsurface.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.569-577
• /
• 2023

This study selected seven carbon-neutral villages, considering the characteristics of each region, including all five administrative districts of Changwon City, and proposed activation plans based on business evaluations through surveys of local residents and FGIs with leaders. The analysis showed that carbon-neutral education was the most important factor for activating carbon-neutral villages, with a response rate of 91.9% for 17 multiple-choice questions, followed by legal (ordinance) arrangements at 79.3% and village organization building at 74.1%. Based on this, the following activation plans through the participation of residents who are involved in the project of creating a carbon-neutral village in Changwon City were proposed. First, the characteristics of each carbon-neutral village model were classified into a resource circulation-based model, an environmental creation-based model, an environmental education and experience event-based model, and an energy efficiency-based model. Second, it is necessary to create and present carbon-neutral village growth stage guidelines for the growth of carbon-neutral villages. Third, manuals and teaching materials related to carbon neutrality, such as theories, issues, and practices, need to be produced and distributed for leaders and activists to easily apply and access for self-government operation of the village. Finally, if a carbon-neutral support center that is legally installable in Changwon City is established, it is expected that the lives of local residents will become more sustainable for carbon-neutral living in preparation for climate crises.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.2D
• /
• pp.163-170
• /
• 2008

According to the rules, a crash cushion is supposed to set up products that is satisfied with the standard of a performance test after performing the car crash test by road safety facilities and management guide. For development of crash cushion, performance should be estimated through the car crash test eventually. However, there is no reasonable design method which considers passenger's safety and only depend on crash test without an alternative plan. Therefore it incurs a loss materially and takes a lot. Therefore, we are asked to create a systematic design of the crash cushion. This study shows that a scientific basis of applying single degree of freedom when it designs the crash cushion after analyzing vehicle crash test data of crash cushion and also represents design of crash cushion through single degree of freedom response spectrum using calculated by crash test data on crash cushion.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.695-701
• /
• 2006

A toluene-degrading bacterial strain was isolated from a mixed culture that was maintained using toluene as a sole carbon and energy source. The isolated bacterium was classified as Pseudomonas sp. TBD4 based on the close relationship to bacteria belonging to this genus. A bottle study to determine biodegradation rates of individual aromatic compounds showed that the biodegradation was faster in the order of toluene, benzene, styrene, and p-xylene. However, when various mixtures were subjected to TDB4, styrene was degraded at the highest rate, indicating that both toluene and p-xylene could stimulate the degradation of other substrates whereas styrene played as an inhibitor. In addition, the mixed culture and TDB4 were inoculated to the bioactive foam reactor (BFR), and the reactor performance and the corresponding change of microbial community were monitored using the fluorescent in situ hybridization (FISH) method. When an inlet concentration of the VOC mixture increased to greater than 250 ppm, the overall removal efficiency dropped significantly. The FISH measurement demonstrated that the ratio of TDB4 to the total bacteria also decreased to less than 20% along with the decline in removal efficiency in the BFR. As a result, the periodic addition of the pre-grown TDB4 might have been beneficial to achieve a stable performance in the BFR operated over an extended period.

• Journal of the Korean Society of Food Culture
• /
• v.23 no.2
• /
• pp.258-267
• /
• 2008

The purpose of this study was to investigate the effects that body composition, nutrient intake, and biochemical indices have on skin status, as well as their associations with skin health status, by assessing 44 female university students. The subjects were classified into 3 groups according to skin sensitivity: sensitive skin (n=11), slightly sensitive skin (n=24), and normal skin (n=9). The study included anthropometric measurements and body composition analyses, dietary intake evaluations, blood chemical analyses, and skin health status assessments. Based on % body fat, the results indicated the subjects were moderately obese (29.6%). Obesity indices were not different among the groups, but the sensitive skin group tended to have higher skinfold thickness. Dry skin was determined as the skin type of all subjects. In the sensitive skin groups, U-zone and T-zone sebum were significantly lower (p<0.05), and spots were significantly higher (p<0.05) than in the normal skin group. In terms of nutrient intakes, the sensitive skin groups consumed significantly lower amounts of P and vitamins A and E (p<0.05). There were no significant differences in serum lipid fractions or total antioxidant status among the groups. In correlation coefficients analysis, skin elasticity had significant negative correlations with subscapular and midaxillary skinfold thickness, body protein, and body minerals (p<0.05). Wrinkling had positive correlations with triceps and thigh skinfold thickness (p<0.05). Skin evenness had negative correlations with energy intake, vitamins A, $B_1,\;B_2$, C, E, niacin, and zinc (p<0.05), as well as folate and P (p<0.01) and vitamin $B_6$ (p<0.001). A similar correlation tendency was observed for spots and nutrient intake, showing negative correlations with vitamins A, $B_6$, and E, as well as folate, Fe, and P. U-zone sebum showed significant positive correlations with serum levels of total cholesterol and triglycerides. From these findings, skin health status appears to be affected by both nutrient intake and body composition. Therefore, having a proper balance between dietary intake and body composition may influence skin health status in females with sensitive skin.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.3
• /
• pp.37-51
• /
• 2011

Geomorphic changes and sedimentary changes are investigated by sediment analysis from estuarine tidal flat, Mosan Bay Estuary, which is a tide-dominated and rias estuary. Sediments separatedly deposited during the early Holocene and the late Holocene. There are unconformities between the early Holocene sediment unit and the late Holocene sediment unit. Developments of these unconformities were related with fluctuated sea level change during the mid Holocene. Three deposit zones are spatially classified, which are named "intermittent tide channel deposit zone"(A1, B1, D3), "flood-dominated deposit zone"(A3, B3, C1, C3), and "fluvial sediment deposit zone"(A2, B2). This classification is explained by three main effects; laterally restricted migration of a tidal channel, diffract flood effect and settling lag effect, and fluvial induced reworking. These effects are deserved as main factors which have formed estuarine geomorphology in tidedominated and rias estuary. This study suggests research directions in reconstructing estuarine geomorphic and sedimentary change in west coast of Korea. Furthermore, it gives useful data for making a "land-ocean interaction" model for west coast of Korea.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.6
• /
• pp.66-73
• /
• 2023

The construction industry suffers losses due to failures in demand forecasting due to price fluctuations in construction raw materials, increased user costs due to project cost changes, and lack of forecasting system. Accordingly, it is necessary to improve the accuracy of construction raw material price forecasting. This study aims to predict the price of construction raw materials and verify applicability through the improvement of the Data Refactor technique. In order to improve the accuracy of price prediction of construction raw materials, the existing data refactor classification of low and high frequency and ARIMAX utilization method was improved to frequency-oriented and ARIMA method utilization, so that short-term (3 months in the future) six items such as construction raw materials lumber and cement were improved. ), mid-term (6 months in the future), and long-term (12 months in the future) price forecasts. As a result of the analysis, the predicted value based on the improved Data Refactor technique reduced the error and expanded the variability. Therefore, it is expected that the budget can be managed effectively by predicting the price of construction raw materials more accurately through the Data Refactor technique proposed in this study.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.6
• /
• pp.491-499
• /
• 2023

Scattering by Sea surface roughness occurs due to sea level roughness, communication performance deteriorates by causing frequency spread in communication signals and time variation in communication channels. In order to compare the difference in time variation of underwater acoustic communication channel according to the surface roughness, an experiment was performed in a tank owned by Hanyang University Ocean Acoustics Lab. Artificial surface roughness was created in the tank and communication signals with three bandwidths were used (8 kHz, 16 kHz, 32 kHz). The measured surface roughness was converted into a Rayleigh parameter and used as a roughness parameter, and statistical analysis was performed on the time-varying channel characteristics of the surface path using Doppler spread and correlation time. For the Doppler spread of the surface path, the Weighted Root Mean Square Doppler spread (w_fσ_ν) that corrected the effect of the carrier frequency and bandwidth of the communication signal was used. Using the correlation time of the surface path and the energy ratio of the direct path and the surface path, the correlation of total channels was simulated and compared with the measured correlation time of total channels. In this study, we propose a method for efficient communication signal design in an arbitrary marine environment by using the time-varying characteristics of the sea surface path according to the sea surface roughness.

• The Journal of Engineering Geology
• /
• v.33 no.4
• /
• pp.611-626
• /
• 2023

Overseas examples of the characterization stage of site selection proposed by the International Atomic Energy Agency were reviewed to highlight the factors necessary for consideration in the deep disposal of high-level radioactive waste. Studies in Sweden, Finland, the USA, and Canada were considered. Site investigations in Sweden and Finland commonly covered the fields of geology, hydrogeology, and hydrogeochemistry using similar field investigation techniques. The USA considered survey groups and factors under pre- and post-lockdown guidelines, as well as those for desaturated and saturated surveys. involving geophysical, hydrological, hydrogeological, hydrogeochemical, mechanical/physical, and thermal-characterization investigations. Canada provided a list of investigative methods for both preliminary and detailed site assessments including geological, physical, boring, hydrological, laboratory testing, and chemical analysis studies. Results of this study should elucidate site-selection investigation factors and survey methods applicable to Korea.