• 한국철도학회논문집
• /
• 제3권1호
• /
• pp.27-33
• /
• 2000

In this paper, numerically evaluated is the crashworthiness of the new design of the standard Korea Electric Multiple Unit Train(K-EMU)[developed by the Korea Railway Research Institute]. The 4-car consist of K-EMU is analyzed under collision conditions such as normal coupling, heavy shunting, light collision and heavy collision to collide against another stationary one at 5 kph, 10 kph, 25 kph and 32 kph, respectively. Energy absorbing capacity of its draftgear commercially available in the market and to be equipped in K-EMU is evaluated under each collision condition. Analytical results show that draftgear only is not enough to provide necessary energy absorbing capacity. It is therefore concluded that additional energy absorbers like mechanical fuses should be adopted to improve the crashworthiness of K-EMU.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2006년도 추계학술발표논문집
• /
• pp.313-316
• /
• 2006

눈은 자외선과 가시광선에 노출되어 있다. 눈은 자외선 노출에 해로우므로 모든 자외선으로부터 눈을 보호해야 한다. 본 연구에서는 자외선 차단을 위해 투명 플라스틱에 유-무기 하이브리드 재료와 자외선 흡수제의 배합에 의한 자외선 차단 코팅하였고, PMMA, CR 39 및 PC기재에 적용하여 자외선 차단 효과를 조사하였다. 자외선 흡수제의 양이 증가할수록 자외선의 투과도는 낮았다. PMMA의 경우 자외선 투과도를 현저히 감소시켰으며 CR 39에서도 자외선 차단 효과가 있는 것으로 나타났다. 한편, PC자체에서는 자외선 차단효과가 있는 것으로 평가되었다. CR 39 렌즈의 부착력, 내약품성, 내온수성은 우수하였고, 연필 경도의 경우 4H였으며 내마모성은 좋지 않았다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(1)
• /
• pp.52-57
• /
• 1996

The coolant void reactivity is positive for CANDU reactor loaded with DUPIC fuel which has more fissile content compared to natural uranium. A parametric study was done to reduce the void reactivity of the fuel bundle and loss in discharge burnup was estimated. It is observed that the burnable absorbers like gadolinium, boron, europium are not able to keep the reduction in void reactivity uniform throughout fuel burnup. Dysprosium and erbium can keep the void reactivity reduction uniform throughout. fuel burnup but toss in discharge burnup for erbium case is more compared to that of dysprosium case.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(1)
• /
• pp.163-168
• /
• 1996

Simulations of Wolsong-1 Phase-B commissioning measurements have been performed, as part of the program to validate WIMS-AECL lattice cell calculations for application to CANDU reactor simulations in RFSP. A required component of these simulations is the calculation of incremental cross sections representing reactivity control devices in the reactor. The incremental cross section properties of the Wolsong-1 adjusters, Mechanical Control Absorbers (MCA) and liquid Zone Control Units (ZCU) are based on the WIMS-AECL/MULTICELL modelling methods and the results are compared with those of WIMS-AECL/DRAGON-2 modelling methods.

• The Journal of the Acoustical Society of Korea
• /
• 제21권2E호
• /
• pp.81-90
• /
• 2002

Single absorbing materials and Helmholtz resonators have limited absorption characteristics over limited frequency ranges due to their structures and properties. Porous materials are highly absorptive for mid and high frequency ranges, while they have little sound absorption for low frequency sounds. Helmholtz resonators are generally used to absorb sound energy for a specified frequency range. Hence they have limited capability in controlling the overall acoustic properties of a space. Not much has been known about useful finishing materials which have enough rigidity and absorption over broad frequency range, in spite of wide demands from acoustic designers and consultants. The present work measured and analyzed absorption characteristics of a slit absorber by varying surface materials, depths of air gap, dimensions of slat and slit widths. It was found that the narrower the slit width, the larger the absorptions over the wide frequency ranges and the pattern was dependent on the presence of porous material. Narrower slat's width tend to increase the slit absorber's absorption more or less. Absorption coefficients at low frequency ranges were dramatically improved (from 0.23 to 0.56) by increasing air gap when porous materials were present.

• 한국식품위생안전성학회지
• /
• 제32권5호
• /
• pp.434-442
• /
• 2017

본 연구에서는 식품용 기구 및 용기 포장으로부터 식품유사용매로 이행되는 12종의 자외선흡수제(Uvinul 3000, Cyasorb UV 24, Uvinul 3040, Tinuvin 312 및 P, Seesorb 202, Chimassorb 81, Tinuvin 329, 234, 326, 328 및 327)의 분석법을 확립하였다. 식품유사용매 중 물, 4% 초산, 50% 에탄올의 경우 hydrophilic-lipophilic balance (HLB) 카트리지로 고체상 추출법(Solid Phase Extraction)을 이용하였고, n-헵탄의 경우 이소프로판올로 희석하여 HPLC-UVD(310 nm)로 자외선흡수제의 이행량을 분석하였다. 확립된 분석법으로 일회용기, 밀폐용기, 일회용백, 소스병, 물병, 도시락 등 국내 유통 폴리에틸렌(60건) 및 폴리프로필렌(140건) 재질의 식품용 기구 및 용기 포장 200건으로부터 식품유사용매로 이행되는 12종의 자외선흡수제 이행량 조사 결과, 물, 4% 초산, 50% 에탄올, n-헵탄 4가지 식품유사용매 모두에서 자외선흡수제는 검출되지 않았다. 따라서, 실제 가정에서 폴리에틸렌이나 폴리프로필렌 재질의 식품용 기구 및 용기 포장을 사용하는 환경에서는 자외선흡수제의 이행 정도는 안전한 수준인 것으로 판단된다. 또한, 자외선흡수제를 0.1 wt%, 0.5 wt%씩 첨가하여 제작한 시편에서의 이행정도는 0.02~0.5% 수준으로 나타나 통상적인 식품용 기구 및 용기 포장을 사용하는 조건에서 자외선흡수제의 이행량은 크지 않은 것으로 나타났고, 안전한 수준임을 확인할 수 있었다. 본 연구에서 확립된 12종 자외선흡수제의 식품유사용매로의 이행량 동시분석법은 폴리에틸렌 및 폴리프로필렌 식품용 기구 및 용기 포장의 안전관리를 위한 기초자료로 활용될 수 있을 것으로 기대된다.

• Structural Engineering and Mechanics
• /
• 제66권6호
• /
• pp.713-727
• /
• 2018

Thin-walled mental tubes under lateral crushing are desirable and reliable energy absorbers against impact or blast loads. However, the early formations of plastic hinges in the thin cylindrical wall limit the energy absorption performance. This study investigates the energy absorption performance of a simple, light and efficient energy absorber called the ring stiffened tube. Due to the increase of section modulus of tube wall and the restraining effect of the T-stiffener flange, key energy absorption parameters (peak crushing force, energy absorption and specific energy absorption) have been significantly improved against the empty tube. Its potential application in the offshore blast wall design has also been investigated. It is proposed to replace the blast wall endplates at the supports with the energy absorption devices that are made up of the ring stiffened tubes and springs. An analytical model based on beam vibration theory and virtual work theory, in which the boundary conditions at each support are simplified as a translational spring and a rotational spring, has been developed to evaluate the blast mitigation effect of the proposed design scheme. Finite element method has been applied to validate the analytical model. Comparisons of key design criterions such as panel deflection and energy absorption against the traditional design demonstrate the effectiveness of the proposed design in blast alleviation.

• Structural Engineering and Mechanics
• /
• 제44권3호
• /
• pp.325-337
• /
• 2012

In this article, the multi-objective optimization of cylindrical aluminum tubes under axial impact load is presented. The specific absorbed energy and the maximum crushing force are considered as objective functions. The geometric dimensions of tubes including diameter, length and thickness are chosen as design variables. D/t and L/D ratios are constricted in the range of which collapsing of tubes occurs in concertina or diamond mode. The Non-dominated Sorting Genetic Algorithm-II is applied to obtain the Pareto optimal solutions. A back-propagation neural network is constructed as the surrogate model to formulate the mapping between the design variables and the objective functions. The finite element software ABAQUS/Explicit is used to generate the training and test sets for the artificial neural networks. To validate the results of finite element model, several impact tests are carried out using drop hammer testing machine.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.120-125
• /
• 2012

Daegu Solar Power Tower Plant of a 200 kW thermal capacity uses an open air receiver. An air receiver is generally based on the volumetric receiver concept with porous ceramic absorbers. Because absorber material is important in the volumetric receiver, ceramic materials with excellent thermal conductivity, high solar absorptivity and good thermal stability have been researched. KIER also developed SiC honeycomb absorber modules and evaluated performance of the modules at the KIER solar furnace. For performance evaluation, we made an open volumetric receiver containing the modules and measured the outlet temperature and the efficiency. It is demonstrated that performance of the KIER absorber is comparable to that of a reference absorber developed by DLR.

• 한국연초학회지
• /
• 제2권1호
• /
• pp.61-67
• /
• 1980

韓國煙草硏究所, 大邱試驗場(北緯35$^{\circ}$49')에서 1979年 透明한 fiber glass로 지은 円柱型 greenhouse(4.50$\times$3.83$\times$2.80m)內에 乾燥室의 外壁 및 天井을 Polyurethan에 함석을 입혀 黑色 paint로 coating한 板을 heat absorber겸 斷熱板으로, 乾燥室 양편에 各各 4.5㎥의 자갈을 넣은 gravel heat storage system 그리고 greenhouse內의 加熱된 空氣를 練燒室로 誘導할 수 있는 air duct를 설치한 8.25㎥의 太陽熱 直接利用 方式의 Bulk 乾燥材와 同一한 크기의 Bulk 乾燥材를 比較 試驗하였다. 乾燥期間中 外溫 30.5~35.5$^{\circ}C$, 總日射量 1004.2~1436.2 cal/$\textrm{cm}^2$의 條件下에서 3回 乾燥 試驗한 結果, 天井 heat absorber의 最高溫度는 89$^{\circ}C$이였으며, 練燒室로 吸入되는 空氣의 最高溫度는 64$^{\circ}C$이며 평균 46$^{\circ}C$로서 外溫에 비하여 18$^{\circ}C$가 높았고, 慣行Bulk乾燥材에 비하여 25%의 燃料가 節減되였다.