• Journal of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.809-820
• /
• 2008

A new modified full scale double tee slabs with the length of nib plate - 1,500 mm were suggested, designed, and experimentally evaluated up to the loading of flexural failure. This slabs were composed of the tee section which was same to original PCI double tee and the plate section which was modified in a new shape, and the prestressing force was applied at the bottom of tee section only. This specimens were made from the domestic precast factory. The safety and serviceability of the modified nib plate with the dapped ends were evaluated up to the ultimate flexural strength of tee section. As the experimental loading increased, the flexural crackings developed first in the bottom of the slab and they changed to the increased flexural shear and inclined shear crackings in the nib and dapped portion of the double tees. The suggested modified double tee slabs failed in ductile above the design loading with many evenly distributed flexural crackings. The thickness of nib plate - 250 mm does not show any cracking under the service loading and show several minor flexural cracking up to the ultimate state of tee portion. The proposed specimens were satisfied with the strength and ductility requirements in the design code provisions in the tests. Additional experimental tests are required to reduce the depth and tensile reinforcement of nib plate concrete for the practical use of this system effectively.

• Journal of Periodontal and Implant Science
• /
• v.26 no.1
• /
• pp.255-265
• /
• 1996

The purpose of the present study is to evaluate dimensional consistency, bristle finishes and bristle rebound rate of four brands of $Dentichek^{(R)}$ toothbrushes(regular-male, regular-female, soft-male, soft-female) to provide referneces in product enhancement and quality control for the manufacturer and to provide suggestions in selecting appropriate toothbrushes for general public. The results are as follows : 1. The size of the head is : $25.10{\times}8.10mm$ for male toothbrushes and $19.90{\times}8.10mm$ for male toothbrushes, while the size of the bristle portion is: $29.90{\times}10.65mm$ for male toothbrushes and $25.25{\times}10.65mm$ for female toothbrushes. 2. The length of the bristles is 10.70mm in all four groups. 3. The length of the toothbrush is 192mm in all four groups. 4. The number of tuft is 43 for male toothbrushes and 35 for female toothbrushes. Tuft arrangement is 4-row configuration in all four groups. 5. The number of bristles in a tuft ranges from 40-56, with higher numbers in male toothbrushes compared to the female counterparts, and higher numbers in the "soft" variety compared to the regular ones. 6. The diameter of the bristle is : 0.21mm for the outer row and 0.19mm for the inner row in the regular brand, and 0.17mm for the soft brand. 7. Irregularly finished bristle ends comprised 20-22% of the total bristles. 8. The bristle rebound rate ranges from 55.9% to 62.3%, with higher numbers in the "soft" variety compared to the regular ones. The above results show that $Dentichek^{(R)}$ toothbrushes meet the requirements of Korean Dental Association standards for toothbrushes, but further evaluations of their effects on periodontium and plaque elimination in actual in-use situation may be needed.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.5
• /
• pp.31-38
• /
• 2007

The practical design method on sandmat uses a drain length, rate of consolidation settlement and permeability of sand as a major design factors. And, on the basis of this design process, it has been installed beneath the embankment with same thickness. However, the possibility the underestimation on the thickness of sandmat and the delayed drain have been pointed out by several authors caused by a differential settlement at the center and the end of embankment. In this study, therefore, the effect of the differential settlement on the thickness of sandmat and delayed drain through the numerical analysis of embankment was analyzed. As a result, a substantial sandmat thickness becomes small and the possibility of the delayed drain can be certified because of the development of differential settlement at the center and ends of embankment. As a countermeasure to overcome this problem, the applicability of the mound type sandmat was also investigated by the numerical method. It can be concluded that it maintains the designated substantial sandmat thickness throughout consolidation process, and is useful method to maintain the drain capacity. Especially, the mound type sandmat is effective method for a construction site where can cause a differential settlement such as embankment. Furthermore, it has to be designed on the basis of the accurate prediction of consolidation settlement as well as rate of consolidation settlement, drain length and permeability of sand.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.13 no.3
• /
• pp.177-197
• /
• 2011

In this study, a series of fire experiments under $HC_{inc}$ and ISO834 (duration of 4 hour) fire scenarios were carried out for three different types of fire protection measures for the segment joint to evaluate their applicabilities to an immersed tunnel. The experimental results revealed that an expansion joint installed to allow relative movements between concrete element ends in an segment joint is the most vulnerable to a severe fire. For the fire protection measure where the originally designed steel plates at an expansion joint arc replaced by fire-resistant boards, the experiments showed that they cannot achieve good fireproofing performance under both $HC_{inc}$ fire scenario and ISO834 (4 hour) fire scenarios since the installation of fire-resistant boards results in the reduction of the sprayed fire insulation thickness. On the other hand, the application of modified bent steel plates replacing the original steel plates was proved to be very successful in fireproofing of the expansion joint due to more sprayed materials filled in bent steel plate than in the original design concept as well as higher adhesion between the steel plate and the sprayed fire insulation layer.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.5
• /
• pp.736-742
• /
• 2017

Objective: Experiments were conducted to clone the sequence of Wild Argali short palate, lung and nasal epithelium clone 1 (SPLUNC1) cDNA, and to lay the foundation for further study the biological function of Wild Argali SPLUNC1. Methods: The complete sequence of Wild Argali SPLUNC1 cDNA was generated by rapid amplification of cDNA ends. The entire coding sequence was inserted into the pPIC9K vector and expressed in Pichia pastoris (P. pastoris) GS115. The recombinant SPLUNC1 protein was detected by Western blot and purified by $Ni^{2+}$ chelate affinity chromatography. The test of effect of the protein on Mycoplasma ovipneumoniae (MO) was performed with real-time polymerase chain reaction. Results: The Wild Argali SPLUNC1 cDNA was 1,076 bp with an open reading frame of 768 bp, which encoded a 26.49 kDa protein composed of 255 amino acids. Its amino acid sequence shared 98.4%, 96.9%, 94.5%, 90.2%, 80.8%, 78.4%, 78.3%, 72.5%, 72.3%, 68.8% identity with those of SPLUNC1 cDNA from Ovis aries (accession no. NP_001288334.1), Capra hircus (accession no. XP_005688516.1), Pantholops hodgsonii (accession no. XP_005979709.1), Bos taurus (accession no. NP_776851.1), Felis catus (accession no. XP_006929910.1), Homo sapiens (accession no. NP_001230122.1), Sus scrofa (accession no. NP_001005727.1), Chinchilla lanigera (accession no. NP_001269294.1), Mus musculus (accession no. NP_035256.2), and Rattus norvegicus (accession no. NP_742028.1), respectively. The recombinant protein corresponded to the expected molecular mass of 25.47 kDa as judged by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and it was detected in the supernatant of P. pastoris, and it could be purified. The results from the test of inhibition effect of argali recombinant SPLUNC1 protein on MO showed that the product could inhibit MO very well (p<0.01). Conclusion: The amino acid sequence of Wild Argali SPLUNC1 was different from other organisms. The recombinant SPLUNC1 protein has good biological activity.

• BMB Reports
• /
• v.37 no.5
• /
• pp.538-545
• /
• 2004

A new CRT binding factor (CBF) gene designated Cbcbf25 was cloned from Capsella bursa-pastoris, a wild grass, by the rapid amplification of cDNA ends (RACE). The full-length cDNA of Cbcbf25 was 898 bp with a 669 bp open reading frame (ORF) encoding a putative DRE/CRT (LTRE)-binding protein of 223 amino acids. The predicted CbCBF25 protein contained a potential nuclear localization signal (NLS) in its N-terminal region followed by an AP2 DNA-binding motif and a possible acidic activation domain in the C-terminal region. Bioinformatic analysis revealed that Cbcbf25 has a high level of similarity with other CBF genes like cbf1, cbf2, and cbf3 from Arabidopsis thaliana, and Bncbf5, Bncbf7, Bncbf16, and Bncbf17 from Brassica napus. A cold acclimation assay showed that Cbcbf25 was expressed immediately after cold triggering, but this expression was transient, suggesting that it concerns cold acclimation. Our study implies that Cbcbf25 is an analogue of other CBF genes and may participate in cold-response, by for example, controlling the expression of cold-regulated genes or increasing the freezing tolerance of plants.

• The Journal of the Korea Contents Association
• /
• v.10 no.5
• /
• pp.285-295
• /
• 2010

The frequency in which noise energy is generated, that is, the point where the preceding vowel ends is the cut-off frequency. Thereupon, this study intends to examine the correlations between, cut-off frequencies, cut-off frequencies changed by the following vowel, and cut-off frequencies and nasalance score, of fricatives and affricates with the subjects of children with the cleft palate and normal children. The subjects of this study are total 12 children residing in Seoul and Gyeonggi area. Six are the children diagnosed to have the cleft palate and whose chronological age are more than six, and another six are the normal children who are also more than six and whose chronological age and sex correspond to those of the former. Each subject was presented with nonsyllable environment and sentence environment(50 environment) of fricatives and affricates. Regarding meaningless syllable environment and sentence environment of fricatives and affricates, children with the cleft palate had lower cut-off frequencies than normal children. As a result of comparative study on correlations between cut-off frequencies and nasalance score of children with the cleft palate and normal children, it doesn't show statistically significant correlations in both meaningless syllable environment and sentence environment of normal children, but it has statistically significant correlations in sentence environment of children with the cleft palate.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.4
• /
• pp.93-99
• /
• 2000

Treatment of shaving scrap, a chrome containing solid scrap generated by leather manufacturing process, has been so far depended on mainly incineration, soil landfill and ocean dumping, which give bad impact on environment and cause pollution. Shaving scrap generates from the mechanical work for controlling the final thickness of leather and its main components are collagen protein and pan of chromium compound. For the purpose of reusing this leather waste as resources, researches in connection with collagen fiber recovery, gelable protein recovery and liquid fertilizer is being speedily progressed. In the experiment, shaving scrap went through wet pulverizing treatment by physical and chemical methods. Then, making the leather sheet evenly, it is mixed with natural latex and every kind of binding materials in the container, and the mixtures were passed through experimental hydraulic press machine and applied to Fourdrinier machine respectively. Lastly, a test for fading out physical strength and properties of multiple-purpose of leather-like material was performed on a continuous leather sheet prepared by the experiment. In result, the physical strength and properties of leather-like material showed noticeable differences according to mixing ratio of binding materials, beating methods and the Ends of binding materials selected, and generally tear strength was the weakest property among others. Also, by the pilot scale experiment in sequence, it was possible to manufacture recycled goods made of soft and hard types of leather-like material with various performances.

• The Journal of the Korea Contents Association
• /
• v.13 no.2
• /
• pp.400-411
• /
• 2013

OCB(organizational citizenship behavior) is a employee behavior that goes above and beyond the call of duty, that is discretionary and not explicitly recognized by the employing organization's formal reward system, and that contributes to organizational effectiveness. In a word, OCB has great potential as a organizational slack. As such, researchers have been showing great interest in the antecedents of OCB, and as a result, now we can meet so many antecedents of OCB from individual level variables to group or organizational level variables that are said to be important in explaining OCB. Additionally each of these variables is known to have its own sound logic and statistically significant effect on OCB. However the results of these studies are so fragmented that researchers have a great difficulty in drawing some meaningful or coherent conclusions. In this context, we try to applicate Q-methodology to find more coherent way of explaining the motives of OCB, and briefly speaking, we find four types of the motives of OCB, that is norm-based, instrumentality-based, trait-based, and avoidance-based type. Among these the last avoidance-based type is especially interesting, because we can't find any remarks on this type in the previous studies. The paper ends with suggestions for future research directions. We expect that these suggestions could be a foundation on which more developed and coherent OCB theories stand. We don't see this approach supplanting earlier efforts; rather we believe this can offer more detailed explanation in addition to those provided by other approaches.

• Journal of the Korean Arthroscopy Society
• /
• v.9 no.1
• /
• pp.70-76
• /
• 2005

Purpose: We describe a new technique of arthroscopic repair with using autogenous hamstring tendon graft augmentation for the acute posterior cruciate ligament rupture. Operative technique: A routine arthroscopic examination of the knee joint is initially performed, then the posterior trans-septal portal is prepared with the using the posteromedial and posterolateral portals. The torn tibial stump that is retracted to the posterior compartment is repaired by a suture hook that is introduced through the anteromedial portal; visualization during this procedure is done with the arthroscope via the posteromedial portal. Using the retrieved suture, both suture ends are brought out to the anteromedial portal. The torn tibial stump is pulled to the intercondylar notch and then repaired with stitches at the anterior compartment. After the tibial and femoral tunnels are prepared without damaging the remnant PCL bundle, the combined torn PCL fibers and the autogenous single-bundle semitendinosus and gracilis tendon grafts are passed through the femoral tunnel and fixed together Conclusion: Arthroscopic repair of the torn tibial stump and autogenous hamstring tendon graft augmentation after preparing the tibial and femoral tunnels by using the trans-septal portal, without damaging the remnant PCL bundle, seems to be a very effective method for the treatment for acute PCL injuries, and especially for tears at the femoral attachment.