• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.9
• /
• pp.1354-1360
• /
• 2006

Maize-soybean meal diets with 0, 100, 200 and 300 g/kg double zero rapeseed meal ('00' RSM) with and without an enzyme mixture (xylanase, pectinase, cellulase) at a level of 1.6 g/kg were evaluated with 624 day-old broiler chicks for 5 weeks. The birds were randomly allocated to eight dietary treatments with three replicates of 26 birds each. Average daily gain (ADG) and feed intake (FI) were recorded weekly and ileal viscosity, organ weights, serum enzyme activity, hormonal profile and hematological parameters were measured at the end of week 5. Average daily gain during the weekly periods was significantly influenced by the dietary level of '00'RSM (p<0.01). Inclusion of '00' RSM improved the ADG up to day 28 with the increased level; beyond that time no improvement was recorded when compared to control groups. However, ADG from 1-35 days was significantly different between 300 g/kg inclusion level of '00' RSM and the control diet. Inconsistent decline in feed intake and feed conversion ratio was observed up to day 21 and the trend was reversed thereafter. The proportion of '00' RSM in the diet had a significant ($p{\leq}0.05$) influence on thyroid weight but had no effect on the relative weights of liver and heart, serum enzyme activities (${\gamma}$-glutamyl transferase, alanine amino transferase and aspartate amino transferase), thyroid hormones ($T_3$ and $T_4$), hemoglobin level and hematocrit. Significant improvement in ADG was recorded during the 2nd week of age with the addition of enzyme, whereas for all other periods, including the whole period of the trial, higher but non-significant ADG was observed. FI and FCR were not affected by the addition of enzyme but there was a numerical reduction in FCR during the whole period. The addition of enzyme reduced the ileal viscosity at all levels of '00' RSM inclusion. The results suggest that '00' RSM can be included up to 300 g/kg in broiler diets without any adverse effects on health and performance. The addition of commercial enzyme mixture containing xylanase, pectinase, cellulase to broiler diets containing '00'RSM has some effect on growth rate and feed conversion efficiency.

• Journal of Animal Science and Technology
• /
• v.59 no.12
• /
• pp.28.1-28.8
• /
• 2017

Background: Major amino acids in pig diets are Lys, Met, Thr, and Trp, but little is known about the requirements for the other essential amino acids, especially on odorous compounds and microbial characteristics in feces of growing-finishing pigs. To this end, different levels of amino acid composition added to diets to investigate the effects of amino acid composition on microbial characteristics and odorous compounds concentration. Methods: A total eight (n = 8) barrows (Landrace ${\times}$ Yorkshire ${\times}$ Duroc) with an average bodyweight of $89.38{\pm}3.3kg$ were individually fed diets formulated by Korean Feeding Standards 2007 (old version) or 2012 (updated with ideal protein concept) in metabolism crates with two replication. After 15-day adaptation period, fresh faecal samples were collected directly from pigs every week for 4 weeks and analysed for total volatile fatty acids (VFA), phenols and indoles by using gas chromatography. The nitrogen was determined by Kjeldahl method. Bacterial communities were detected by using a 454 FLX titanium pyrosequencing system. Results: Level of VFA tended to be greater in 2012 than 2007 group. Among VFAs, 2012 group had greater (p < 0.05) level of short chain fatty acids (SCFA) than control.Concentration of odorous compounds in feces was also affected by amino acid composition in pig diet. Levels of ammonium and indoles tended to be higher in 2012 group when compared with 2007 group.Concentration of phenols, p-cresol, biochemical oxygen demand, and total Kjeldahl nitrogen, however, were lower (P < 0.05) in 2012 treatment group compare to 2007. The proportion of Firmicute phylum were decreased, while the Bacteriodetes phylum proportion increased and bacterial genera includingCoprococcus, Bacillus, and Bacteroides increased (p < 0.05) in 2012 compare to 2007 group. Conclusion: Results from our current study indicates that well balanced amino acid composition reduces odor by modulating the gut microbial community. Administration of pig diet formulated with the ideal protein concept may help improve gut fermentation as well as reduce the odor causing compounds in pig manure.

• The Korean Journal of Applied Statistics
• /
• v.10 no.1
• /
• pp.69-84
• /
• 1997

We consider a linear calibration problem, $y_i = $$\alpha + \beta (x_i - x_0) + \epsilon_i$, $i=1, 2, {\cdot}{\cdot},n$ $y_f = \alpha + \beta (x_f - x_0) + \epsilon, $ where we observe $(x_i, y_i)$'s for the controlled calibration experiments and later we make inference about $x_f$ from a new observation $y_f$. The objective of the calibration design problem is to find the optimal design $x = (x_i, \cdots, x_n$ that gives the best estimates for $x_f$. We compare Kim(1989)'s Bayesian design which minimizes the expected value of the posterior variance of $x_f$ and some optimal designs from literature. Kim suggested the Bayesian optimal design based on the analysis of the characteristics of the expected loss function and numerical must be equal to the prior mean and that the sum of squares be as large as possible. The designs to be compared are (1) Buonaccorsi(1986)'s AV optimal design that minimizes the average asymptotic variance of the classical estimators, (2) D-optimal and A-optimal design for the linear regression model that optimize some functions of $M(x) = \sum x_i x_i'$, and (3) Hunter & Lamboy (1981)'s reference design from their paper. In order to compare the designs which are optimal in some sense, we consider two criteria. First, we compare them by the expected posterior variance criterion and secondly, we perform the Monte Carlo simulation to obtain the HPD intervals and compare the lengths of them. If the prior mean of $x_f$ is at the center of the finite design interval, then the Bayesian, AV optimal, D-optimal and A-optimal designs are indentical and they are equally weighted end-point design. However if the prior mean is not at the center, then they are not expected to be identical.In this case, we demonstrate that the almost Bayesian-optimal design was slightly better than the approximate AV optimal design. We also investigate the effects of the prior variance of the parameters and solution for the case when the number of experiments is odd.

• Korean Journal of Optics and Photonics
• /
• v.31 no.5
• /
• pp.205-212
• /
• 2020

In the performance of a wind turbine system, the blades play a vital role. However, they are susceptible to damage arising from complex and irregular loading (which may even cause catastrophic collapse), and they are expensive to maintain. Therefore, it is very important both to find defects after blade manufacturing is completed and to find damage after the blade is used for a certain period of time. This study provides a new perspective for the detection of internal defects in glass-fiber- and carbon-fiber-reinforced panels, which are used as the main materials in wind turbine blades. A gap or fracture between fiber-reinforced materials, which may occur during blade manufacturing or operation, is simulated by drilling a hole 5 mm in diameter in the middle layer of the laminated material. Then, a digital-image-correlation (DIC) method is used to detect internal defects in the blade. Tensile load is applied to the fabricated specimen using a tensile tester, and the generated changes are recorded and analyzed with the DIC system. In the glass-fiber-reinforced laminated specimen, internal defects were detected from a strain value of 5% until the end of the experiment, while in the case of the carbon-fiber-reinforced laminated specimen, internal defects were detected from 1% onward. It was proved using the DIC system that the defect was detected as a certain level of strain difference developed around the internal defects, according to the material properties.

• Journal of the HCI Society of Korea
• /
• v.11 no.3
• /
• pp.5-12
• /
• 2016

The number of visually-impaired people using a smartphone is currently increasing with the help Text-to-Speech(TTS). TTS converts text data in a mobile application into sound data, and it only allows sequential search. For this reason, the location of buttons and contents inside an application should be determined carefully. However, little attention has been made on TTS service environment during the development of mobile newspaper application. This makes visually-impaired people difficult to use these applications. Furthermore, a mobile application interface which also reflects the desire of the low vision is necessary. Therefore, this paper presents a mobile newspaper interface which considers the accessibility and the desire of various visually impaired people. To this end, the proposed interface locates buttons with the consideration of TTS service environment and provides search functionality. The proposed interface also enables visually impaired people to use the application smoothly by filtering out the words that are pronounced improperly and providing the proper explanation for every button. Finally, several functionalities such as increasing font size and color reversal are implemented for the low vision. Simulation results show that the proposed interface achieves better performance than other applications in terms of search speed and usability.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.9
• /
• pp.1249-1254
• /
• 2000

A study was conducted to evaluate the replacement value of Leucaena leucocephala and Gliricidia sepium as nitrogen sources in commercial type supplements for dairy goats. Six crossbred $(Toggenburg{\times}Saanen)$ goats at late stage of lactation were allocated to three dietary treatments in a double $3{\times}3$ Latin square design. The animals were offered rhodes grass (Chloris gayana) hay ad libitum and supplemented with either Leucaena-based concentrate (LBC), Gliricidia-based concentrate (GBC) or commercial based concentrate (CC). Voluntary food intake, milk yield and composition and changes in live weight were measured. The total dry matter (DM) intake was higher (p<0.05) in goats fed GBC than CC (1385 vs 1331 g/d). The DM intake for LBC (1343 g/d) was similar to CC (1331 g/d). The DM intake of hay was also higher (p<0.05) in goats fed GBC (834 g/d) than those receiving LBC or CC (789, 782 g/d, respectively). Animals supplemented with GBC recorded positive (11 g/d) weight gain while the other groups lost weight (13, 19 g/d) for LBC and CC respectively, although these differences were not statistically significant (p>0.05). The composition of milk were: butterfat 58, 49 and 55 g/kg; crude protein 37.0, 35.4 and 36.1 g/kg; lactose 33, 29 and 30 g/kg; Ash 8.5, 8.5 and 7.9 g/kg and total solids 136.5, 121.9 and 129.0 g/kg, for goats fed LBC, GBC and CC respectively. There were no differences in the composition of milk due to these dietary treatments. At the end of performance trial, a digestibility trial was conducted using 6 female goats allocated to the three treatments (LBC, GBC and CC) in an incomplete randomized block design and each goat received a different supplement in each of two successive periods. There were no differences in nutrient digestibility except for DM, which was higher (p<0.05) in CC compared to the other treatments (615, 622, 720 g/kg for LBC, GBC and CC, respectively). Economic analysis showed that CC diet was more expensive (0.20 US$/kg) and had a lower margin over supplementation (0.11 US$) compared to LBC and GBC (0.13 vs 0.12 US$/kg and 01.5 vs 0.12 US$, respectively). It is concluded that the Leucaena and Gliricidia could contribute as nitrogen sources in compounded diet supplements without any detrimental effects on production in dairy goats.

• Fire Science and Engineering
• /
• v.26 no.3
• /
• pp.21-28
• /
• 2012

The objective of this study is to evaluate the prediction accuracy of FDS(Fire Dynamic Simulator) for the thermal and chemical characteristics of under-ventilated fire with unsteady fire growth in a semi-closed compartment. To this end, a standard doorway width of the full-scale ISO 9705 room was modified to 0.1 m and the flow rate of heptane fuel was increased linearly with time (until maximum 2.0 MW based on ideal heat release rate) using a spray nozzle located at the center of enclosure. To verify the capability of FDS, the predicted results were compared with a previous experimental data under the identical fire conditions. It was observed that with an appropriate grid system, the numerically predicted temperature and heat flux inside the compartment showed reasonable agreement with the experimental data. On the other hand, there were considerable limitations to predict accurately the unsteady behaviors of CO and $CO_2$ concentration under the condition of continuous fire growth. These results leaded to a discrepancy between the present evaluation of FDS and the previous evaluation conducted for steady-state under-ventilated fires. It was important to note that the prediction of transient CO production characteristics using FDS was approached carefully for the under-ventilated fire in a semi-closed compartment.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.3
• /
• pp.308-313
• /
• 2015

A $3{\times}3$ factorial study was conducted to investigate the effects of dietary protein and lipid levels on the growth, feed utilization and innate immunity of red seabream Pagrus major. Nine diets consisting of three protein levels (42%, 46% and 50% crude protein) and three lipid levels (10%, 14% and 18% crude lipid) were formulated. Triplicate groups of red seabream were fed the experimental diets to apparent satiation (5-6 times a day, from 08:00 to 18:00 h at 2-h intervals) for 10 weeks. At the end of the feeding trial, the weight gain and specific growth rate of fish fed P46L14 (46% protein and 14% lipid), P50L10 (50% protein and 10% lipid) and P50L14 (50% protein and 14% lipid) were significantly (P<0.05) higher than those of fish fed P42L18 (42% protein and 18% lipid). The feed conversion ratios (FCR) of the fish were affected by dietary lipid levels (P<0.039), but not dietary protein levels. The FCR tended to increase with increasing dietary lipid levels from 10% to 18% with the 46% and 50% protein levels. The weight gain, protein efficiency ratio, specific growth rate, feed intake and survival of fish were not affected by either dietary protein or lipid levels. Myeloperoxidase activity in the group fed P50L14 (50% protein and 14% lipid) was significantly higher than that in the group fed P42L10 (42% protein and 10% lipid) or P50L18 (50% protein and 18% lipid). However, the myeloperoxidase activity of fish was not affected by either dietary protein or lipid level. The fish fed P46L14 (46% protein and 14% lipid) and P46L18 (46% protein and 18% lipid) showed significantly higher superoxide dismutase activity than did the fish fed P46L10 (46% protein and 10% lipid), P50L10 (50% protein and 10% lipid) of P50L18 (50% protein and 18% lipid). In conclusion, the optimum protein and lipid levels for the growth and feed utilization of juvenile red seabream were 46% and 14%, respectively, and the optimum dietary protein to energy ratio was 27.4 g/MJ.

• Journal of the Korean Institute of Gas
• /
• v.20 no.1
• /
• pp.13-22
• /
• 2016

This paper presents development of an appropriate procedure and flow chart to analyze shale gas production data obtained from a multi-fractured horizontal well according to flow characteristics in order to calculate an estimated ultimate recovery. Also, the technical considerations were proposed when a rate transient analysis was performed with field production data occurred to only $1^{st}$ transient flow. If production data show the $1^{st}$ transient flow from log-log and square root time plot analysis, production forecasting must be performed by applying different method as before and after of the end of $1^{st}$ linear flow. It is estimated by an area of stimulated reservoir volume which can be calculated from analysis results of micro-seismic data. If there are no bottomhole pressure data or micro-seismic data, an empirical decline curve method can be used to forecast production performance. If production period is relatively short, an accuracy of production data analysis could be improved by analyzing except the early production data, if it is necessary, after evaluating appropriation with near well data. Also, because over- or under-estimation for stimulated reservoir volume could take place according to analysis method or analyzer's own mind, it is necessary to recalculate it with fracture modeling, reservoir simulation and rate transient analysis, if it is necessary, after adequacy evaluation for fracture stage, injection volume of fracture fluid and productivity of producers.