• 콘크리트학회논문집
• /
• 제17권6호
• /
• pp.1025-1032
• /
• 2005

이 연구에서 격막이 설치된 각형 CFT 기둥의 장기거동에 관한 실험과 해석을 수행하였으며, 이를 통해 각형 CFT 기둥의 장기거동에 미치는 격막의 영향을 파악해 보고자 하였다. 격막의 크기에 따라 두 가지, 기둥 길이에 따라 세 가지 변수를 두어 총 6가지의 변수에 대한 실험과 각 실험체에 대한 3차원 유한요소 해석을 수행하였다. 강관과 콘크리트의 계면 거동을 고려한 유한요소 해석은 격막이 설치된 CFT 기둥의 실제 거동을 정확히 모사하였으며, 이를 통해 유한요소 모델링의 정확성이 검증되었다. 실험과 해석 결과로부터 다음과 같은 결론을 얻었다. 격막에 의한 기둥 단부의 구속 효과는 기둥의 길이에 상관없이 CFT 기둥의 단부에서 기둥의 폭만큼 내려간 위치까지이며, 이외의 부분에서 격막 또는 강관에 의한 구속 효과는 나타나지 않았다. 또한 내부 콘크리트 면적의 1/2 이상을 가압할 수 있는 격막이 설치된 각형 CFT 기둥의 장기변형에 의한 축소량은 강관과 콘크리트의 전체 면적을 동시에 가압한 경우의 축소량과 동일하다.

• Childhood Kidney Diseases
• /
• 제23권2호
• /
• pp.86-92
• /
• 2019

Steroid-resistant nephrotic syndrome (SRNS) has long been a challenge for clinicians due to its poor responsiveness to immunosuppressants, and rapid progression to end-stage renal disease. Identifying a monogenic cause for SRNS may lead to a better understanding of podocyte structure and function in the glomerular filtration barrier. This review focuses on genes associated with slit diaphragm, actin cytoskeleton, transcription factors, nucleus, glomerular basement membrane, mitochondria, and other proteins that affect podocyte biology.

• Journal of Chest Surgery
• /
• 제23권3호
• /
• pp.572-576
• /
• 1990

A complete transection of left main bronchus was repaired by end to end anastomosis 5 months after the chest trauma in the Yeungnam University Hospital. The patient was a 36 years old male who had been injured bluntly by a heavy package on the left chest. The initial symptoms and signs were dyspnea, chest pain and subcutaneous emphysema on the left neck, but on admission at our hospital his chief complaint was only mild left chest discomfort. The preoperative chest X-ray findings 5 months after the trauma revealed total collapse of the left lung, deviation of trachea to the left, elevation of left diaphragm, abrupt discontinuation in the course of an air-filled left main bronchus and bronchoscopy showed that the left main bronchus was completely occluded, without any signs of inflammation, approximately 4 cm from the carina. The operation was performed through standard posterolateral thoracotomy incision at the fifth intercostal space. There was not any suppuration within the transected lung but plenty of white mucus which was removed by forceful suction. The transected bronchial edges were debrided and anastomosed primarily by end to end with interrupted nonabsorbable sutures. The suture line was reinforced with a pleural flap. The postoperative course was uneventful and pulmonary function following operation improved progressively and proved the delayed repair to have a reasonable decision.

• 한국강구조학회 논문집
• /
• 제30권2호
• /
• pp.77-85
• /
• 2018

각형강관 기둥을 이용한 모멘트 접합부는 주로 관통형 다이어프램 형식으로 사용되고 있으나, 제작 및 시공과정이 복잡하여 적용하는데 어려움이 있다. 본 연구에서 제안하는 강구조물 시스템은 단위 유닛 모듈(각형강관 기둥, H형강 보, 원웨이 볼트)을 현장으로 반입하여 볼트조립만으로 완성되는 것이다. 따라서 이 연구에서는 내부보강판의 길이, 내부보강판의 형상을 변수로 설정하여 제안된 기둥-보 접합부의 내력 및 강성, 연성능력, 에너지 소산능력을 비교 분석하여 제시된 강구조물 시스템을 평가하였다.

• 한국강구조학회 논문집
• /
• 제17권4호통권77호
• /
• pp.459-467
• /
• 2005

본 연구는 외측 다이아프램을 사용하여 현장용접에 의한 각형강관 기둥과 H형강 보를 접합법의 개발에 목적을 둔다. 본 연구에서 제안하고 있는 것은 현장용접을 이용한 외측 보강재에 의한 특정 타입의 기둥-보 접합부이다. 이 접합부의 구조적 거동은 실험적으로 검토되었다. 두 가지 하중 유형 실험은 세부적으로 주어진 실험 변수 하에 수행되었다. 먼저 제안된 접합부의 기본적인 특성을 연구하기 위하여 양단부에서 보를 핀 지지한 후 중앙점에서 기둥을 가력한 대칭 하중재하 실험을 기술하였다. 두 번째는 이 접합부의 구조적 성능을 연구하기 위하여 기둥의 양단은 단순지지로 하고 H형강 보 양단에서 하중을 제어하는 역대칭 하중재하 실험을 기술하였다. 실험 결과, 본 논문에서 제안한 외측 보강재 타입의 접합부는 정량적 평가 방법이라는 것을 알 수 있었다.

• 한국임상수의학회지
• /
• 제40권5호
• /
• pp.354-359
• /
• 2023

This case report describes the clinical presentation and successful surgical repair of a diaphragmatic hernia-related small intestinal strangulation in a neonatal foal. A nine-day-old foal presented with colic signs and respiratory distress. History taking showed that the dam of the foal experienced difficulty during delivery, and the owner assisted in delivery by pulling on the foal. Radiography and ultrasonography confirmed the diaphragmatic rent and the presence of a small intestine within the thoracic cavity. Surgical intervention was required to repair the diaphragmatic defect and address the intestinal strangulation. The diaphragm was reconstructed, and the nonviable incarcerated portion of the small intestine was resected and anastomosed using an end-to-end technique. This unusual case report provides insights into the surgical repair and outcomes of an acquired diaphragmatic hernia in a neonatal foal.

• 대한의용생체공학회:의공학회지
• /
• 제14권2호
• /
• pp.163-167
• /
• 1993

We developed a ventricular assist device(VAD) to be used as a bridge to heart transplantation or a circulatory assist device for patients with end-stage heart disease or poor myocardial function after cardiac surgery. It is a pneumatic and diaphragm-type VAD and its stroke volume is 90 cc. The upper housing and diaphragm is made of a segmented polyurethane and the lower back plate is made of a polycarbonate. Two Carbomedics$^R$ mechanical valves are used as inlet and outlet valves. It was tested in vitro and the cardiac output of the VAD was 7 L/min at a heart rate of 70 bpm. The line pressure from a pressure transducer inserted in the pneumatic line was recorded and compared with the ideal pressure tracing.

• Steel and Composite Structures
• /
• 제26권1호
• /
• pp.31-44
• /
• 2018

This paper reports a novel steel beam-to-column connection suitable for use in the weak axis of I-section column. Monotonic and cyclic loading experimental investigations and numerical analysis of the proposed weak-axis connection were conducted, and the calculation procedure of the beam-column relative rotation angle and plastic rotation angle was developed and described in details. A comparative analysis of mechanical property and steel consumption were employed for the proposed I-section column weak-axis connection and box-section column bending connection. The result showed that no signs of fracturing were observed and the plastic hinge formed reliably in the beam section away from the skin plate under the beam end monotonic loading, and the plastic hinge formed much closer to the skin plate under the beam end cyclic loading. The fracture of welds between diaphragm and skin plate would cause an unstable hysteretic response under the column top horizontal cyclic loading. The proposed weak-axis connection system could not only simplify the design calculation progress when I-section column is adopted in frame structural design but also effectively satisfy the requirements of 'strong joint and weak member', as well as lower steel consumption.

• 전자공학회논문지A
• /
• 제31A권8호
• /
• pp.7-15
• /
• 1994

In this paper, the directional coupler for Ku-band, which is designed is of the crossguide type with a coupling value of about 3-dB. The apertures chosen for this design are crosses. We used polynomial approximations of rounded end slot to obtain the electric and magnetic polarizability of crossed-slot and compared the results with Cohn's experimental results. The optimized dimensions and positions of the cross aperture are obtained by a trial-and-error reiteration of the program. This paper presents the measurement results for the designed coupler. The very flat coupling shows a total variation of only 29.80$\pm$0.04dB for the design frequency ranges of 12.25GHz-12.75GHz. The measured minimum directivity is 25dB. The aperture attenuation for the finite diaphragm thickness is about 2dB pr 0.5mm, which is in agreement with the theoretical value. The transmission loss and input return loss at center frequency are 0.0564dB and 48.16dB respectively. We obtained the measured minimum directivity of the coupler. Whose apertures are both circles is better than that containing holes in the performance of directivity.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.451-456
• /
• 2006

This paper is concerned with the dynamic modeling and controller design for a cylindrical shell equipped with MFC actuators. The dynamic model was derived by using Rayleigh-Ritz method based on Donnel-Mushtari shell theory. The actuator and sensors for the MFC actuator equations were derived based on pin-force model. The boundary conditions at both ends were assumed to be shear diaphragm. After calculating the natural vibration characteristics, the positive position feedback controller was designed to cope with the first two modes. To this end, the equations of motion were reduced to modal equations of motion by considering the modes of interest. The theoretical results show that vibrations can be successfully suppressed.