• Journal of Korea Water Resources Association
• /
• v.51 no.1
• /
• pp.19-33
• /
• 2018

This study proposed a rainfall-runoff model for the purpose of real-time flood warning in urban basins. The proposed model was based on the shot noise process, which is expressed as a sum of shot noises determined independently with the peak value, decay parameter and time delay of each sub-basin. The proposed model was different from other rainfall-runoff models from the point that the runoff from each sub-basin reaches the basin outlet independently. The model parameters can be easily determined by the empirical formulas for the concentration time and storage coefficient of a basin and those of the pipe flow. The proposed model was applied to the total of three rainfall events observed at the Jungdong, Guro 1 and Daerim 2 pumping stations to evaluate its applicability. Summarizing the results is as follows. (1) The unit response function of the proposed model, different from other rainfall-runoff models, has the same shape regardless of the rainfall duration. (2) The proposed model shows a convergent shape as the calculation time interval becomes smaller. As the proposed model was proposed to be applied to urban basins, one-minute of calculation time interval would be most appropriate. (3) Application of the one-minute unit response function to the observed rainfall events showed that the simulated runoff hydrographs were very similar to those observed. This result indicates that the proposed model has a good application potential for the rainfall-runoff analysis in urban basins.

• Journal of Korea Water Resources Association
• /
• v.54 no.5
• /
• pp.311-320
• /
• 2021

The agricultural water, which occupy about 61% of total water usage in the South Korea, is significantly objective to archieve effecitive water resources management. The objective of the study is to suggest a simple method in actual practice that could be used to estimate agricultural water usage in river considering hydrological condition. Historical record of agricultural water usage and runoff, which take account for hydrological condition of the basin, were obtained for totally 27 river basins. As the result, the high threshold value of the agricultural water usage rates compared to maximum usage amount has a particular correlations to the percent of normal year runoff for last 2 month, and threshold line of agricultural water usage rates was derived using the quantile regressions. Finally, two dimensionless threshold line and empirical formulas that described the correlation between the percent of normal year runoff for last 2 month and the agricultural water usage rate compared to maximum usage amount were derived. Also, the simple criteria to select which line and formula based on the characteristics of the basins was suggested but it need further studies. The result of the study could be used as an elemantary data in actual practice for water resoureces management.

• Journal of the Korean Institute of Gas
• /
• v.26 no.6
• /
• pp.9-15
• /
• 2022

In order to verify the durability of the high-pressure hydrogen tank in the operating pressure range, a hydraulic rupture test should be performed. However, if the bubbles generated by the initial injection process of water are attached to the inner wall of the tank and remain, a sudden pressure change of the bubbles during the rupture of the pressurized tank may cause shock and noise. Therefore, in this study, the flow velocity required to remove the bubbles remaining on the inner wall of the tank was predicted through simplified formulas, and the shape of the injection nozzle to maintain the flow velocity was determined based on the shape of the hydrogen tank for the hydrogen bus. In addition, a numerical model was developed to predict the change in flow velocity according to the inlet pressure, and an experiment was performed through a model tank to prove the validity of the prediction result. As a result of the experiment, the flow velocity near the tank wall was similar to the predicted value of the analysis model, and when the inlet pressure was 1.5 to 5.5 bar, the minimum size of the removable bubble was predicted to be about 2.2 to 4.6 mm.

• Journal of Science Education
• /
• v.47 no.2
• /
• pp.211-224
• /
• 2023

The purpose of this study is to suggest how to investigate the reliability of the assessment, which consists of items generated by automatic item generation using empirical example data. To achieve this, we analyzed the illustrative assessment data by applying the multivariate generalizability theory, which can reflect the design of responding to different items for each student and multiple error sources in the assessment score. The result of the G-study showed that, in most designs, the student effect corresponding to the true score of the classical test theory was relatively large after residual effects. In addition, in the design where the content domain was fixed, the ranking of students did not change depending on the item types or items. Similarly, in the design where the item format was fixed, the difficulty showed little variation depending on the content domains. The result of the D-study indicated that the original assessment data achieved a sufficient level of reliability. It was also found that higher reliability than the original assessment data could be obtained by reducing the number of items in the content domains of operation, geometry, and probability and statistics, or by assigning higher weights to the domains of letters and formulas, and function. The efficient measurement conditions presented in this study are limited to the illustrative assessment data. However, the method applied in this study can be utilized to determine the reliability and to find efficient measurement conditions for the various assessment situations using automatic item generation based on measurement traits.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.1
• /
• pp.5-14
• /
• 2024

PHC piles demonstrate superior resistance to compression and bending moments, and their factory-based production enhances quality assurance and management processes. Despite these advantages that have resulted in widespread use in civil engineering and construction projects, the design process frequently relies on empirical formulas or N-values to estimate the soil-pile friction, which is crucial for bearing capacity, and this reliance underscores a significant lack of experimental validation. In addition, environmental factors, e.g., the pH levels in groundwater and the effects of seawater, are commonly not considered. Thus, this study investigates the influence of vibrating machine foundations on PHC pile models in consideration of the effects of varying pH conditions. Concrete model piles were subjected to a one-month conditioning period in different pH environments (acidic, neutral, and alkaline) and under the influence of seawater. Subsequent repeated direct shear tests were performed on the pile-soil interface, and the disturbed state concept was employed to derive parameters that effectively quantify the dynamic behavior of this interface. The results revealed a descending order of shear stress in neutral, acidic, and alkaline conditions, with the pH-influenced samples exhibiting a more pronounced reduction in shear stress than those affected by seawater.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.3
• /
• pp.543-560
• /
• 2018

With the increased development in downtown underground space facilities that vertically cross under a railway at a shallow depth, the demand for non-open cut method is increasing. However, most construction sites still adopt the pipe roof method, where medium and large diameter steel pipes are pressed in to form a roof, enabling excavation of the inside space. Among the many factors that influence the loosening region and loads that occur while pressing in steel pipes, the size of the pipe has the largest impact, and this factor may correspond to the magnitude of load applied to the underground structure inside the steel pipe roof. The super equilibrium method (SEM) has been developed to minimize ground disturbance and loosening load, and uses small diameter pipes of approximately 114 mm instead of conventional medium and large diameter pipes. This small diameter steel pipe is called an SEM pile. After SEM piles are pressed in and the grouting reinforcement is constructed, a crossing structure is pressed in by using a hydraulic jack without ground subsidence or heaving. The SEM pile, which plays the role of timbering, is a fore-poling pile of approximately 5 m length that prevents ground collapse and supports surface load during excavation of toe part. The loosening region should be adequately calculated to estimate the spacing and construction length of the piles and stiffness of members. In this paper, we conducted a comparative analysis of calculations of loosening load that occurs during the press-in of SEM pile to obtain an optimal design of SEM. We analyzed the influence of factors in main theoretical and empirical formulas applied for calculating loosening regions, and carried out FEM analysis to see an appropriate loosening load to the SEM pile. In order to estimate the soil loosening caused by actual SEM-pile indentation and excavation, a steel pipe indentation reduction model test was conducted. Soil subsidence and soil loosening were investigated quantitatively according to soil/steel pipe (H/D).