• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.1
• /
• pp.73-77
• /
• 2008

We have investigated dielectric polarization in organic light-emitting diodes using 8-hydroxyquinoline aluminum($Alq_3$) as an electron transport and emissive material. We analyzed the dielectric polarization of organic light-emitting diodes using characteristics of impedance and equivalent circuit of $ITO/Alq_3/Al$. Impedance characteristics was measured complex impedance Z and phase ${\theta}$ in the frequency range of $1{\times}40Hz\;to\;1{\times}10^8Hz$. We obtained complex electrical conductivity, dielectric constant, and loss tangent(tan${\delta}$) of the device at room temperature. And, we obtained the equivalent circuit of $ITO/Alq_3/Al$ through analyzing dielectric constant and dielectric loss tangent. From these analyses, we could interpret a conduction mechanism and dielectric polarization.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.71-71
• /
• 2012

To control luminescence emission property, a novel series of strong fluorescent fluorin-boron complexes were synthesized in higher yield. The resulting structural analysis was completed. Small molecules with a built-in fluorine-boron core structural architecture has been attracted considered attention as the key emissive elements due to the their good properties such as bipolar charge transport and high photo efficiency. Thus, new type of fluorine-boron(F-B) complexes are designed and prepared. Changing the substituent position on fluorophore ring provided a deep understanding on the relationship between structure and optical properties.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1403-1406
• /
• 2007

An effective WOLED structure was demonstrated which improved a luminous efficiency and white color chromaticity independent on applied bias by employing effective carrier transporting layer, without any alteration of emissive materials. The modified WOLEDs exhibited 2 times higher luminous efficiency than the control device and showed balanced white emission during an operation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.1088-1091
• /
• 2001

Temperature-dependent current-voltage characteristics of Organic Light-Emitting Diodes(OLEDs) were studied. The OLEDs were based on the molecular compounds, N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1, 1'-diphenyl-4, 4'-diamine (TPD) as a hole transport and trim(8-hydroxyquinoline) alulninum(Alq$_3$) as an electron transport and emissive material. The current-voltage characteristics were measured in the temperature range of 10[K] and 300[K]. A conduction mechanism in OLEDs was interpreted in terms of tunneling and trap-filled limited current.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.189-192
• /
• 2008

A 5.8-inch wide-QQVGA flexible full-color active-matrix OLED display was fabricated on a plastic substrate. Low-voltage-operation organic TFTs and high-efficiency phosphorescent OLEDs were used as the backplane and emissive pixels, respectively. The fabricated display clearly showed color moving images when the driving voltage was below 15 V.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.30-33
• /
• 2008

Using a $Ir(ppy)_3$ doped in hole and electron transport host materials, simple three layers green PHOLEDs comprising double emissive layers have been fabricated. A low driving voltage value of 3.3 V to reach a luminance of $1000\;cd/m^2$ and maximum current- and power-efficiency values of 53.9 cd/A and 57.8 lm/W are demonstrated in this simple structure phosphorescent OLED.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1116-1119
• /
• 2008

We developed phosphorescent white OLEDs with high efficiency and color stability. By engineering device architecture in which confined excitons within the emissive layer by using adequate interlayer and balanced recombination of charge carriers by using stepwise hole transporting layer system, these WOLEDs showed power efficacy of 43.6 lm/W with CRI = 62 and 36 lm/W with CRI = 72 at $100\;cd/m^2$ without outcoupling enhancements.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1067-1070
• /
• 2006

We have demonstrated highly efficient WOLED with two separated emissive layers using a blue fluorescent dye and a red phosphorescent dye. The maximum luminous efficiency of the device was 11.2 cd/A at $20\;mA/cm^2$ and $CIE_{x,y}$ coordinates varied from (x = 0.33, y = 0.37) at 6V to (x = 0.25, y = 0.33) at 14V.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.641-643
• /
• 2006

Add-Vision has developed a low-cost print technology for P-OLED displays on flexible substrates that meets several essentials for a new technology including: (1) Functionality including low DC voltage and wide color gamut; (2) Utilization of inexpensive tools; (3) Performance matching entry applications and markets. AVI's process is based on large-area printing of a combination of doped emissive and air-stable cathode inks utilizing truly low-cost tools to create printed P-OLEDs.

• Journal of Information Display
• /
• v.12 no.4
• /
• pp.179-190
• /
• 2011

A complete analysis of the color-viewing-angle properties of different displays is presented herein using color-viewing-angle measurements made with a Fourier-optics system. The color gamut in the CIE u'v' chromatic plane was computed for all the viewing angles. The introduction of the lightness using the $L^*a^*b^*$ color space allowed a more precise analysis of the emissive properties of each display. The displays can be directly compared using a common reference. The viewing-angle dependence can be analyzed in full detail using the on-axis values as reference. The gravity center behavior and area of the color hull were computed for a more precise evaluation and comparison.