• Journal of the Optical Society of Korea
• /
• v.18 no.1
• /
• pp.15-22
• /
• 2014

We present a novel bandwidth measurement scheme for multimode optical fibers. Amplified spontaneous emission (ASE) radiation was utilized for a source of intrinsically modulated light with a wide modulation bandwidth. In our measurement scheme, the continuous-wave (CW) ASE light that passed through a multimode fiber (MMF) under test was analyzed by the fourth-order power with a high-speed photodetector and an electric spectrum analyzer. The modulation transfer function of the multimode fiber could be directly measured with the photoelectric spectra in the modulation frequency domain. The measurement result of our method was experimentally compared to that of the conventional measurement scheme based on the impulse response measurement. It has been found that our scheme provides a stable measurement means of MMF characterization that is suitable for the field testing due to the simplicity of the system.

• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.118-120
• /
• 2004

We propose the algorithm for parameters extraction through measured subthreshold amplified spontaneous emission (ASE) spectra for various DFB-type LDs. we compare spectra for extraction parameters through its algorithm with for original parameters.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.2
• /
• pp.265-268
• /
• 2008

Among the efforts to increase the efficiency of organic light-emitting device (OLED), there is a way: doping phosphorescent materials. As a phosphorescent material, complexes of heavy transition metal, platinum, were synthesized. $Cl^-$ ion and phenyl group were used as ancillary ligands with 2-(2-pyridyl)benzimidazole (pbi) as a chromophore. The complexes were analysed by FAB-mass spectrometer and absorption and emission spectra were obtained. A phenyl group was able to shift the emission band of the complex even if it's not a chromorphore.

• Korean Journal of Optics and Photonics
• /
• v.29 no.1
• /
• pp.32-39
• /
• 2018

The impact of the amplified spontaneous emission (ASE) on the gain recovery time of a bulk semiconductor optical amplifier (SOA) is investigated. The gain-recovery time is obtained by determining the time evolution of the gain, carrier density, and ASE in an SOA, after the propagation of a short pump pulse and continuous-wave (CW) probe of gain dynamics. In the simulation, a wide-band-semiconductor model, which can be characterized by the material gain coefficient over a wide wavelength range, is used, because the gain bandwidth of a practical SOA is very wide. The pump pulse and counterpropagating CW probe field are considered in the simulation, with the ASE noise spectrum equally divided.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3 s.33
• /
• pp.36-48
• /
• 1999

Fatigue life and crack retardation behavior after penetration were experimentally examined using surface pre-cracked specimens of aluminium alloy 5083. The Wheeler model retardation parameter was used successfully to predict crack growth behavior after penetration. By using a crack propagation rule, the change in crack shape after penetration can be evaluated quantitatively. Advanced, waveform-based acoustic emission (AE) techniques have been successfully used to evaluate signal characteristics obtained form fatigue crack propagation and penetratin behavior in 6061 aluminum plate with surface crack under fatigue stress. Surface defects in the structural members are apt to be origins of fatigue crack growth, which may cause serious failure of the whole structure. The nondestructive analysis on the crack growth and penetration from these defects may, therefore, be one of the most important subjects on the reliability of the leak before break (LBB) design. The goal of the present study is to determine if different sources of the AE could be identified by characteristics of the waveforms produced from the crack growth and penetration. AE signals detected in four stages were found to have different signal per stage. With analysis of waveform and power spectrum in 6061 aluminum alloys with a surface crack, it is found to be capabilities on real-time monitoring for the crack propagation and penetration behavior of various damages and defects in structural members.

• Korean Journal of Materials Research
• /
• v.26 no.4
• /
• pp.212-215
• /
• 2016

In this paper, cerium doped lutetium pyrosilicate (LPS) powders with cerium content (0.05 and 0.07 mol%) were prepared by sol-gel process. The formation of lutetium pyrosilicate (LPS) phase was confirmed by XRD analysis for the powders heated at $1,200^{\circ}C$; in these powders, a single phase of $Lu_2Si_2O_7$ (LPS) was observed. Cerium doped lutetium pyrosilicate (LPS) powder was agglomerated and constituted of small spherical particles with diameters of about 300 nm. The photoluminescence spectra of the $Lu_2Si_2O_7:Ce^{3+}$ powders showed the characteristic of excitation and there was an emission spectrum for $Ce^{3+}$ in the host of $Lu_2Si_2O_7$. The emission spectrum shows a broad band in the range of 350-525 nm; the broad wavelength on the right side of the spectra should be ascribed to the same 5d-4f transitions of $Ce^{3+}$, as in the case of cerium doped $Lu_2Si_2O_7$ single crystals.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.3
• /
• pp.193-197
• /
• 2012

$Gd_{1-x}VO_4:{Eu_x}^{3+}$ red phosphors were synthesized with changing the concentration of $Eu^{3+}$ ion by using a solid-state reaction method. The crystal structure, surface morphology, and photoluminescence and photoluminescence excitation properties of the red phosphors were measured by using X-ray diffractometer, field emission-scanning electron microscopy, and florescence spectrometer, respectively. The XRD results showed that the main peak of all the phosphor powders occurs at (200) plane. As for the photoluminescence properties, the maximum excitation spectrum occurred at 306 nm due to the charge transfer band from ${VO_4}^{3-}$ to $Eu^{3+}$ ions and the maximum emission spectrum was the red luminescence peaking at 619 nm when the concentration of $Eu^{3+}$ ion was 0.10 mol.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.230-244
• /
• 1996

We derive analytic expressions for the spontaneous emission spectrum (SES) of a multisection distributed feedback (DFB) structure device employing complex coupled gratings including the effects of both facets reflections. The multisection DFB structure device used in the analysis is a general model which allows the independent phase of a grating in each section, and the sections without gratings. The expressions are the same as those derived by makino and glinski in case the gratings are index coupled and the phase of a grating in each section, ${\varphi}_k$ is '0' which means the phase of gratings in the device is ocntinuous. The expressions for the SES of a phase-shift-controlled (PSC) DFB structure device using tunable devices are derived from the general expressions. The number of parametes of the expressions is reduced by using the parameter of effective phase shift defined by the sum of the phase shift in a PSC region and the difference of the phase of a grating in each active region. Equations showing the effect of both facets reflections and the effective phase shift on the SES are derived. The validaty of the equations is verified by computer simultions. Computer simulation results also show the possibility of evaluating the structure parametes of the device from its SES.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.81.2-81.2
• /
• 2014

We have analyzed the archival data of far ultraviolet (FUV) observations made for the region of GSH 006-15+7, a large shell-like structure discovered by Moss et al. (2012) from the H I velocity maps. FUV emission is seen enhanced in the lower supershell region and is believed to originate from dust scattering of interstellar photons. A corresponding Monte Carlo simulation indicates that the supershell is located at a distance of $1250^{+750}{_{-500}}$ pc, similar to the previous estimation of 1.5{\pm}0.5 kpc based on kinematic considerations. The spectrum obtained for the lower supershell exhibits molecular hydrogen fluorescence lines: a simulation model for this candidate photodissociation region (PDR) yields a rather high total hydrogen density of $n_H{\sim}30cm^{-3}$ with H2 column density of $N(H_2){=}^{1017.5-20.0}cm^{-2}$. It is argued that the region is in a transition stage from a warm to a cool neutral phase. Strong C IV emission is also seen in the spectrum, but it is not believed to be associated with the supershell as the corresponding spectral map shows a broad region of enhancement both inside and outside the supershell.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.96-97
• /
• 2000

Incoherent broadband optical sources have been applied in various areas such as a light source for optical device characterization, fiber-optic gyroscopes$^{(1)}$ , and spectrum sliced light source in wavelength division multiplexing (WDM) system$^{(2)}$ . To utilize the inherent low loss in silica optical fibers, various types of incoherent light sources are being developed. Among the light sources, the amplified spontaneous emission (ASE) from a rare earth doped fiber has benefits in temperature stability, high output power, low polarization dependence over semiconductor diodes$^{(3)}$ . Recently erbium doped fibers (EDF) have been intensively researched for ASE sources as well as optical amplifiers$^{(4)}$ . The spectrum of ASE from an EDF, however, is limited in the 1520~1560 nm range in conventional configurations. In this letter we described a new broadband ASE source which included both the conventional ASE band of Er$^{3+}$ ion, 1520nm~1560nm and ASE band from Tm$^{3+}$ ions that extends the bandwidth further. For the first time, to the best knowledge of authors, a fiber ASE source based on the energy transfer between Er$^{3+}$ and Tm$^{3+}$ ions in the range of 1460~1550 nm, has been demonstrated using a single 980nm pump laser diode. (omitted)omitted)