• 한국통신학회논문지
• /
• 제35권8B호
• /
• pp.1188-1196
• /
• 2010

본 논문에서는 DMB 방송장치의 대역외발사강도에 대한 국내외 기준을 고찰하였으며, 10mW/MHz 이하의 지상파 소출력 중계기 방사 마스크 요구조건들을 분석하였다. 이를 토대로 소출력 DMB 중계기에 적합한 대역외방사특성 기준을 제안하였으며, 3개 블록들을 포함하는 멀티블록 중계기에 대한 기준도 함께 제안하였다. 제안된 기술기준의 타당성 및 유용성은 다양한 실험들을 통하여 입증하였다. 제안된 기술기준값을 이용하면 DMB 중계기의 소형화 및 저가화가 가능하며, 향후 DMB 음영지역 해소를 통한 방송구역 확대 등에 유용하게 사용될 수 있다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1046-1049
• /
• 2006

We proposed a simplified fabrication structure and method which can provide separate Red (R), Green (G), Blue (B), and White (W) OLED pixels with 2 metal-mask changes in emitting layer fabrication inspired from the structure of multi-layer white OLED and carrier blocking mechanism. A red emission layer for the R and W pixel with 1st mask, and then a blue emission layer with hole blocking layer for the B and W pixel with 2nd mask, and finally a common green emission layer were deposited sequentially. We expect that this concept would be very useful to the actual fabrication of multi-color OLED display although additional optimization is needed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.752-754
• /
• 2009

High efficiency white organic light emitting diodes were fabricated by using an alignment free mask patterning method. Only red/green emission without any blue emission was observed in the red/green patterned region and blue emission was emitted in other area. A combination of the red/green and blue emission gave a high efficiency white emission. A maximum current efficiency of 30.7 cd/A and a current efficiency of 25.9 cd/A at 1000 cd/$m^2$ were obtained with a color coordinate of (0.38, 0.45).

• 대한전자공학회논문지TC
• /
• 제47권12호
• /
• pp.97-103
• /
• 2010

본 논문에서는 DTV 방송장치의 대역외발사강도에 대한 국내외 기준을 고찰하였으며, 장비유형별 방사 마스크 요구조건들을 분석하였다. 이를 토대로 DTV 중계기에 적합한 대역외방사특성 기분을 제안하였으며 실험을 통하여 제안된 기술기준의 유용성을 입증하였다. 제안된 기술기준 값을 이용하면 DTV 중계기의 소형화 및 저가화가 가능하며, 향후 디지털 전환에 필요한 방송구역 확대 등에 유용하게 사용될 수 있다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.711-714
• /
• 2004

A new design for improving the aperture ratio of bottom emission type AMOLED is investigated. In conventional, the TFT of AMOLED fabrication method is "Etch Stopper (7-mask)", so the aperture ratio is limited in 28${\sim}$33% by Cs(Storage Capacitor). A high aperture ratio TFT is designed by using BCE(Back Channel Etching 5-mask) fabrication way and the aperture ratio is up to 40% shown in 2.2"AMOLED display.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권2호
• /
• pp.130-136
• /
• 2015

In this paper, we analyzed the adjacent channel interference of the LTE band 40 defined by 3GPP on the WLAN system based on the Monte-Carlo method, and found the guard band required for compatibility between the two systems. This study have a difference compared to the previous studies about cell radius was determined using Extended Hata Model considering practical environment, interference protection distance related to guard band, and the spectrum emission mask improvement effect for minimizing the interference. Simulation results, for no channel interference compatibility of LTE and WLAN for mobile satellite wireless package system, we can find the need 15MHz guard band at specified spectrum emission mask and 10MHz guard band at assumed spectrum emission mask.

• 한국항행학회논문지
• /
• 제10권4호
• /
• pp.333-341
• /
• 2006

본 논문에서는 시간도약 UWB 신호의 주파수 특성을 해석하고 실제의 신호의 전력 스펙트럼은 주로 사용된 펄스의 전력 스펙트럼에 의하여 결정됨을 보였다. 또한, 코드 스펙트럼의 상세한 해석을 하였다. 그리고 FCC의 emission mask를 충분히 활용할 수 있는 펄스의 설계 방법을 제시하였다. 제시한 펄스 설계방법은 가우시안 미분 펄스의 시간 지연 파형을 선형으로 결합하였으며 결합된 새로운 파형은 FCC의 전력 밀도 마스크를 충분히 활용할 수 있다. 이때 선형 결합 계수는 LSE(Least Square Error)를 최소화 하도록 계산하였다. 다양한 계수의 수와 기본 펄스들에 대한 결과적인 펄스의 전력 스펙트럼 밀도 및 파형을 계산하였다.

• Journal of electromagnetic engineering and science
• /
• 제9권4호
• /
• pp.202-210
• /
• 2009

In this paper, we have analyzed the effect of interference between ultra-wideband(UWB) and intelligent transport systems(ITS). The maximum possible UWB emission power and minimum possible distance between UWB devices and ITS are found. In order to analyze the interference, we employ the Monte-Carlo(MC) method. We consider six situations, which are indoor office line-of-sight(LOS), indoor office non-line-of-sight(NLOS), indoor residential LOS, indoor residential NLOS, outdoor rural LOS, and outdoor rural NLOS environments. From the simulation results, it is confirmed that coexistence between UWB and ITS devices can be realized in accordance with the emission mask of 19.3 dB for indoor application or 19.3 dB for an image system. And in the outdoors, coexistence between UWB and ITS devices can be realized if the emission mask is at least 1.6 dB for vehicles' radar systems.

• Journal of Electrical Engineering and Technology
• /
• 제1권2호
• /
• pp.246-250
• /
• 2006

Highly ordered gold nanodot arrays have been successfully obtained by vacuum evaporation using an anodic aluminum oxide (AAO) as a shadow mask. An AAO mask with the thickness of 300 um was prepared through an anodization process. The structure of the nanodot arrays was studied by a field- emission scanning electron microscope (FE-SEM) equipped with an energy dispersive spectrometer (EDS). A tapping mode atomic force microscope (AFM) was employed for studies of height and phase feature. The nanodot arrays were precisely reproduced corresponding to the hexagonal structure of the AAO mask in a large area. In the gold nanodot arrays, the average diameter of dots is approximately the same as the AAO pore size in the range from 70 um to 80 nm and 100 nm center-to-center spacing. EDS analysis indicated that the gold dots were almost entirely consisted of gold, a highly demanded material.

• 전기전자학회논문지
• /
• 제17권3호
• /
• pp.221-228
• /
• 2013

About functional parameters of a LED/UVLED (Light Emitting Diode/Ultra Violet LED), one of the most important parameters is the I-V characteristic. By researching factors affect to the I-V characteristic of uvled, we found that beside of the structure of the device itself, there is the influence of the electrode materials, electrode shapes, the process of wiring and packaging. In this work, we want to improve the performance of UVLED to find out the optimal mask design principles. The study is based on theoretical mathematical models, as well as the use of simulation software tool Comsol. From all results obtained, the team has improved mask design to manufacture electrodes for GaN-based UVLED. Electrode masks are designed by three softwares, which are Intellisuite, Klayout and AutoCad. Intellisuite masks would be used in fabrication simulation while Klayout and AutoCad are used to fabricate electrodes in experiments. As well as, we silmulated the structure of an uvled 355nm emission wavelength by TCAD software, in order to compare with uvled sample that has the same emission wavelength.