• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.411-412
• /
• 2007

EL (electro luminescent) is generally studied as a large size plane light emitting device and flexible light source because of it's simple manufacturing process. In this experiment, we manufactured flexible white emitting light source using Ni-foil with blue phosphor and color change materials. With increasing the thickness of color change material, the luminance of white emission is increased and the color coordinate of white color was shifted to pure white of (0.317,0.328) by strong emission of color change materials excited by blue excitation spectra. Also the luminance level was 30% higher in white emitting light device than blue only light source.

• 한국전기전자재료학회논문지
• /
• 제21권10호
• /
• pp.911-915
• /
• 2008

EL (electro-luminescent) device as a light source has an advantage in embodying large area with great flexibility. On nickel foil as an electrode and backplane, we demonstrated a white EL flexible light source with blue phosphor layer combined with color change layer. A correlation between color change layer and color coordination was analyzed by Gaussian method, and then the color coordinate was controlled near to (0.33, 0.33) of pure white light.

• 반도체디스플레이기술학회지
• /
• 제11권1호
• /
• pp.35-39
• /
• 2012

$YAlO_3:Tb{_x}^{3+}$ has been synthesized by a combustion process and the concentration x of Tb was varied from 0.001 and 0.05 mol% per mole of $YAlO_3$. The emission optical properties on the $YAlO_3:Tb{_x}^{3+}$ have been investigated by time-resolved photoluminescence spectra and decay curves of center wavelength. The emission color changes from blue to green with increasing the $Tb^{3+}$ concentration from x= 0.001 to 0.05 mole fraction in $YAlO_3$ host. This emission color change can be explained in terms of cross-relaxation processes. Decay curves of emission intensity indicate that the type of energy transfer is donor-acceptor transition.

• 대한방사선기술학회지:방사선기술과학
• /
• 제13권2호
• /
• pp.21-25
• /
• 1990

This report is study about difference of H-D curve in regular film and ortho type film, and obtained results as follows : 1. In the blue-color emission intensifying screen, ortho type films and in the green-color emission intensifying screens, regular type are decreased in their gradient. 2. When joint use of regular type film and ortho type film, the gradient difference not seen in blue color screen. 3. The gradient difference seen clearly in G4, KM screens(green color emission intensifying). Especially, in part of high film density, the gradient difference are great. So we have to right use of screen and film because not matched used of theare the sensitivity and gradient are decrease.

• 대한치과보철학회지
• /
• 제27권1호
• /
• pp.123-141
• /
• 1989

The purpose of this study was to investigate the tendency of color change of ceramic, and its mechanism un der the influence of Pd-Ag alloy. The specimens were made by firing porcelain on tile metal plates cast with Au-Pt alloy, Pd-Cu alloy and Pd-Ag alloy. In the case of Pd-Ag alloy, specimens were fired under three different conditions as follows, 1) without protection, 2) protection with ceramic metal conditioner, 3) protection with carbon block. For the specimens of element analysis, a barrier was constructed with platinum foil between metal plate and ceramic. Color change was measured with colorimeter and elemental changes in ceramic were calculated with DC argon plasma emission spectrophotometer. The results were as follows : 1. Color change of ceramic by Pd-Ag alloy was negligible in hue, but decreased in value and increased in chroma (yellow discoloration). 2. Color change of ceramic by Pd-Ag alloy was appeared through vapor transport mechanism. 3. As the protection method for the color change of ceramic by Pd-Ag alloy, application of ceramic metal conditioner was superior to utilization of carbon block.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.65-68
• /
• 2002

A new driving scheme is proposed to improve the color purity by reducing the neon (Ne) emission of 585 nm in an ac PDP. Applying the new driving scheme to the address electrodes during a sustain-period induces a new discharge mode that can reduce the Ne emission remarkably. For this new discharge mode, the change in the Ne emission intensity including the discharge characteristics is measured and the corresponding mechanism is also analyzed. As a result, it is found that a color gamut area is expanded by approximately 9.2 % in comparison with a conventional case.

• 한국재료학회지
• /
• 제19권10호
• /
• pp.533-537
• /
• 2009

This paper presents a new method for the improvement of color temperature without the change of the driving scheme using transparent dielectric layers with various metal oxides (CeO$_2$, Co$_3$O$_4$, CuO, Fe$_2$O$_3$, MnO$_2$, NiO) in plasma display panels (PDP). In this study, we fabricated ZnO-B$_2$O$_3$-SiO$_2$-Al$_2$O$_3$ glasse with various metal oxides and examined the optical properties of these glasses. As the metal oxides were added to the glasses, the visible transmittances of the dielectric layers decreased and the transmittances in special wavelength regions were reduced at different rates. The change of the transmittance in each wavelength range induced the variation of the visible emission spectra and the change of the color temperature in the PDP. The addition of Co$_3$O$_4$ and CuO slightly decreased the intensity of the blue light, but the intensities of the green and the red light were significantly decreased. Therefore, the color temperature can be improved from 6087K to 7378K and 7057K, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제31권12호
• /
• pp.3707-3710
• /
• 2010

A chromo/fluorogenic $NO_2S_2$-macrocycle L functionalized with nitrobenzofurazan unit as a dual-signaling probe was synthesized and structurally characterized by single crystal X-ray analysis. In a cation-induced color change experiment, L exhibited excellent $Hg^{2+}$ ion selectivity by showing the color change from orange-red to yellow. However, this hypochromic shift by $Hg^{2+}$ was observed for the weaker coordinating anion system such as ${NO_3}^-$ and ${ClO_4}^-$ ions. The observed anion effect is due to the strong coordination of anions inhibits the bond formation between $Hg^{2+}$ and the macrocyclic tert-N atom, which is sensitive to induce the color change. In the fluorometric experiment, L showed chelate-enhanced fluorescence change effect only with $Hg^{2+}$ ion, together with a change from yellow to green emission. The sensing ability for $Hg^{2+}$ with the proposed chemosensor L is due to the stable complexation with 1:1 stoichiometry (metal-to-ligand).

• Applied Science and Convergence Technology
• /
• 제24권4호
• /
• pp.111-116
• /
• 2015

The graphene oxide (GO) and graphene oxide quantum dots (GOQDs), which have gained research interest as new types of light-emitting materials, were synthesized by the modified Hummers method for oxidation of graphite flake and graphite nanoparticle. The optical properties of GO and GOQDs have been compared by mean of photoluminescence (PL), PL excitation (PLE), UV-vis absorbance, and time-resolved PL. The GO have an absorption peak at 229 nm and shoulder part at 310 nm, whereas the GOQDs show broad absorption with a gradual change up without any absorption peaks. The PL emission of GOQDs and GO showed the green color at 520 nm and the red color at 690 nm, respectively. The red emission of GO showed faster PL decay time than the green emission of GOQDs. In particular, the temporal PL profile of the GO showed redshift from 560 nm to 660 nm after the pump event.

• 조명전기설비학회논문지
• /
• 제29권6호
• /
• pp.27-34
• /
• 2015

There has been a critical issue in optical simulation of phosphors in LEDs due to their light-reabsorption properties. To improve the accuracy of optical modeling for a white LED package, we utilized the spectrum data of the phosphor-dispersed encapsulant film instead of the phosphor powder. By measuring white LED packages with green and red phosphors, the maximum difference between simulation and experimental results of a color temperature, a color rendition index number and a color coordinate corresponds to ${\Delta}T=95K$, ${\Delta}Ra=1.7$ and ${\Delta}xy=0.007$, respectively. Based on those results, the proposed method can well explain the change of emission spectra of white LEDs with more than two phosphors which introduce the complex optical phenomena such as absorption, reabsorption, light emission, reflection and scattering, etc.