• 제목/요약/키워드: emergy

검색결과 59건 처리시간 0.033초

유채유를 이용한 바이오디젤의 Emergy 분석

  • 장혜현;이석모
    • 한국환경과학회:학술대회논문집
    • /
    • 한국환경과학회 2007년도 춘계 학술발표회 발표논문집
    • /
    • pp.539-541
    • /
    • 2007
  • 유채유를 이용한 바이오디젤의 실질적인 가치는 배럴당 355,000원으로, 현재의 가격은 평가절하되어 있으며 에머지 생산비율(EYR)은 1.27으로서 석유의 8.4에 비하여 효율이 낮아 대체에너지로서의 경쟁력은 없으나 1보다 높아 에너지 소비 절감의 효과는 있다. 환경부하비율(ELR)은 2.46으로 수력발전의 3.3과 Bioethanol의 7.7보다 낮아 환경에 미치는 영향은 작은 것으로 나타났다. 에머지 지속가능성지수(ESI)는 0.52로 재생불가능한 에너지와 외부에서 구입한 재화와 용역에 대한 의존도가 높으므로 지속성이 낮은 것으로 나타났다.

  • PDF

한국의 1차 산업에 대한 EMERGY 분석

  • 김진이;김남국;김우석;이석모
    • 한국어업기술학회:학술대회논문집
    • /
    • 한국어업기술학회 2000년도 추계수산관련학회 공동학술대회발표요지집
    • /
    • pp.135-136
    • /
    • 2000
  • 1970년대 지구적 차원의 에너지 부족, 인플레이션, 과도한 경제성장 그리고 환경보전에 대한 관심고조는 자연환경과 경제활동에 대한 지금까지의 양상과는 다른 인식전환을 요구하였다. 1992년 Rome Club에서 발표된 "Limits to Growth"에서 인류에 대한 위기를 지적, 우리의 미래에 대한 Sustainability의 개념은 새로운 이슈가 되었다. 1992년 $\ulcorner$리우환경선언$\lrcorner$ 에서 앞으로 인류가 나아가야만 하는 미래의 방향으로 ESSD(Environmentally Sound and Sustainable Development)를 제시하였다. 한국의 경우, 환경에 대한 고려는 최근까지도 정부의 경제성장 우선 정책에 의해서 뒷전으로 밀려나 있었다. (중략)

  • PDF

하이브리드 보행보조장치의 에너지 소모도 비교분석 (Analysis of emergy comsumption for Hybrid Gait Orthosis)

  • 강성재;류제청;김규석;문무성
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2004년도 추계학술대회 논문집
    • /
    • pp.814-817
    • /
    • 2004
  • It is a challenging task to make the paraplegic to walk with out the assist of the caregiver. So, we have developed various type of gait orthosis for paraplegic during the five years lately. The purpose of this study ultimately is energy consumption test of serveral type gait orthosis for developing the high efficiency gait orthosis. From the experimental results, the oxygen consumption rate were 6.9$\pm$3.3ml/kg in RGO gait, 5.3$\pm$1.3ml/kg in PGO, and 6.2$\pm$3ml/kg in HGO gait. The maximum hip flexion angle were 16$^{\circ}$ in RGO , 15$^{\circ}$ in PGO, and 47.5$^{\circ}$. in HGO. As a result It was found that. Hybrid Gait Orthosis need high energy consumption more than PGO for walking, but it is small weight and strengthened muscle.

  • PDF

공급사슬망의 에너지 절약을 위한 MFCA 도입 방안 연구 (A Study on the Introduction of MFCA for Emergy Saving in Supply Chain)

  • 이두용;장정환;장청윤;조용철;이창호
    • 대한안전경영과학회지
    • /
    • 제14권4호
    • /
    • pp.147-152
    • /
    • 2012
  • Supply chain including transportation expend the 21% of domestic energy consumption. It is necessary to diminish the excess energy usage at entire supply chain. This paper deals with the application of MFCA(Material Flow Cost Accounting) for SCM to save energy consumption. We construct the material center corresponding to each logistics function in order to apply the MFCA for GCM(Green Chain Management). We also construct the MFCA framework which consists of MFCA Database Management, MFCA Visualization, GCM Data Integration, GCM Data Tracking, and MFCA Data Predict & Assignment. We expect to help determining the range of logistics function to apply the MFCA for GCM.

에머지(Emergy) 개념을 이용한 산지가치의 계량화에 관한 연구

  • 김남국;김진이;이석모
    • 한국환경과학회:학술대회논문집
    • /
    • 한국환경과학회 2006년도 추계 학술발표회 발표논문집
    • /
    • pp.421-424
    • /
    • 2006
  • 종래의 개발은 양면성을 가지고 있다. 하나는 개발로 인한 경제적 효율성과 편리성 부분이고, 다른 하나는 그러한 개발로 인한 자연훼손 및 생태계 파괴이다. 이로 인해 개발과 보전은 양립할 수 없는 상반적인 개념으로 받아들여져 왔고, 개발론과 보전론의 대립적 구도가 지속되어 왔다. 우리나라는 국토의 65% 이상이 산지이기 때문에 산지의 부분적 개발은 피할 수 없는 사회적 요구인 동시에, 산지는 자연생태계의 보고로서 생태계 보전이 필수적인 지역이다. 이러한 산지 개발과 보전에 대한 상반적 이해를 통합하여 자연과 인간의 공생체계를 갖추기 위해서는 인간중심의 사고에서 탈피하여 사람과 생태계 그리고 자연을 하나로 보는 총체적인 측면에서 접근하는 새로운 패러다임이 설정되어야 한다. 본 연구에서는 산지의 정량적인 가치를 평가하기 위해 시 공간적으로 다양한 인자들에 대해 시스템적인 관점에서 그 중요성을 고려하고자 하는 에머지 개념을 통해 산지 본래의 가치를 평가하였다. 에머지 개념은 그 동안 생태계가치평가, 개발사업의 편익-비용평가, 환경수용력 평가, 개발대안 평가, 환경계정, 환경훼손 소송관련 비용 평가 등에 적용되었다. 이러한 에머지 개념을 이용한 평가 방법을 통한 의사결정이 이루어지면 산지뿐만이 아닌 생태계의 지속가능한 이용을 실현하기 위한 적절한 정책의 선택과 이의 이행 실효성을 높일 수 있을 것으로 기대되며, 자연환경 가치의 정량적 평가를 통해서 우리는 한층 더 자연환경 및 자원의 다원적 기능에 대한 자각을 할 수 있을 것으로 판단된다.

  • PDF

시스템 생태학적 접근법에 의한 가막만 패류생산의 지속성 평가 3. 가막만 패류 양식업의 에너지 모델링 (Sustainability Evaluation of Shellfish Production in Gamak Bay Based on Systems Ecology 3. Energy Modeling of Shellfish Aquaculture Production in Gamak Bay)

  • 오현택;이석모;이원찬;정래홍;홍석진;김남국
    • 한국환경과학회지
    • /
    • 제17권9호
    • /
    • pp.969-980
    • /
    • 2008
  • This research was performed to simulate shellfish production systems and sales in Gamak Bay, South Korea. To study the way the shellfish system generates maxima, a numerical model was developed to simulate the model under a control and a number of different scenarios. The program calculates the EMERGY flows by multiplying the flows of energy and materials by the appropriate solar transformity. In this study, an energy systems model was built to simulate the variation of sustainability for oyster aquaculture. The results of the simulation based on 2005 data that as oyster production yield slightly increases, money and assets increase to a steady state. When the program is run control simulation, the system reaches carrying capacity after 8 years. The simulation of models with price of purchased inputs increased with 3.5% inflation rate per year showed maximum benefit of shellfish production occurs after 6 years but amounts are less than control simulation, and then decreases slightly in money and yield results. The results with 3.5% inflation and increase of oyster price annually showed steady and slightly increase of money and yield.

전분반죽의 점도에 미치는 가열온도의 영향 (Effect of Heating Temperature on Viscosity of Starch Dough)

  • 이부용;이창호;이철호
    • 한국식품과학회지
    • /
    • 제27권4호
    • /
    • pp.593-597
    • /
    • 1995
  • 전보$^{(1)}$에 이어서 옥수수전분과 찰옥수수전분을 사용하여 중간 수분계의 수분함량으로 반죽을 제조하고 수분함량과 가열온도, 가열시간에 따른 전분 반죽의 물성 변화와 호화양상을 밝혀보고자 하였다. 이를 위하여 옥수수전분과 찰옥수수전분 반죽에 대해 수분함량과 가열 온도별로 점도와 호화도를 측정하고 점도에 미치는 영향을 Arrhenius 식으로 조사하였다. 반죽의 점도에 미치는 가열온도의 영향은 옥수수전분의 경우 수분함량이 증가할 때 $44{\sim}48%$% 사이에서 $E_a$의 값이 (-)에서 (+)로 바뀌고, 가열온도가 호화온도 이상으로 증가할 때 반죽의 점도가 증가하는 것으로 나타났다. 찰옥수수전분의 경우 수분함량이 40%와 44% 사이에서 $E_a$의 값이 (-)에서 (+)로 전환되어서 옥수수전분보다 4% 정도 낮은 수분함량에서도 가열온도가 전분호화온도 이상이면 반죽의 점도가 증가하는 것으로 나타났다.

  • PDF

The Prospects of International Cities in China

  • Zhou, Yi-Xing
    • 지역연구
    • /
    • 제15권2호
    • /
    • pp.131-153
    • /
    • 1999
  • Since 1980's there have been two trends that obviously developed in the would -- economics globalization and urban internationalization. China, with is reform and opening-up policy and rapid economic growth, keeps pace with these two trends. The term "International City" has no putative standard or definition. If we make an analogue of urban functional hierarchy in the world with a pyramid, the International Citiesa are the few elites on its top. The highest level international cities can be called "World City" or "Global City". In today's new international division of labor, they are diversified leading cities with control capacity on a world scale, like New York, London, and Tokyo. The secondary international cities are either diversified cities with influence and regulative functions on multinational scale or specialized cities on politics, economics, culture, or other aspects with worldwide impact. Judged by different criteria, there is no city that is qualified as International City with the exception of Hong Kong, which was returned to the P.R. of China in 1997. Nevertheless, Some favorable conditions for the development of the international city still exist in China. This country is already the sixth largest economic entity in the world, and the second largest economic entity in the world, and the second largest one if GNP estimated by ppp. Furthermore its import and export value make up for 40% of its GNP, indicating that China is repidly merging into global economy. In this 1, 2 billion-population country, the difference of economic levels between urban and rural, coastal and inland regions is so big that a few metropolises in the coastal region have the possibilities and potentials to develop into international cities regardless of rather low GNP per capita of the whole country. This article will focus on analysis from several perspectives, such as the proportion of foreign trade values in GDP, the proportion of imports and exports by foreign funded enterprises in total foreign trade value; distribution of the 500 largest foreign-funded enterprises; distribution of the 500 enterprises with largest import and export values; distrigbution of foreign computer and telecom companies with offices in China; the number of outward flights per week and the international tourists; the value of foreign capital used in cities and so on. From this analysis, it is predicted that Chinese international cities will surely emergy from the eastern coastal regions and they must be the core cities of metropolitan interlocking regions that have been formed or in the process of forming. Those international cities will arise from south to north in turn : Hong Kong-Guangzhu, Shanghai, Beijing-Tianjin, and perhaps the last one is Dalian-Shenyang. The other side of this issue is that there is a long way for the coming international cities in China except Hong Kong. At least China and these core cities must continually devote to (1) improve the regional composition of foreign capital sources. (2) improve the composition of export commodities. (3) improve the investment environment (including hard and soft environment) to attract more transnational corporations to settle. (4) deepen the reform of state-owned enterprises and establish Chinese own transnational corporations to enter the world market.ons to enter the world market.

  • PDF

Ag-20wt% Pd-20wt% Cu 3원합금(元合金) 및 Au첨가합금(添加合金)의 시효경화특성(時效硬化特性) (The Effect of Au Addition on the Hardening Mechanism in Ag-20wt% Pd-20wt% Cu)

  • 박명호;배봉진;이화식;이기대
    • 대한치과기공학회지
    • /
    • 제19권1호
    • /
    • pp.21-35
    • /
    • 1997
  • Au 함량이 20% 미만인 Au-Ag-Pd합금의 기초합금인 Ag-Pd-Cu 3원계 합금의 시효경화 특성을 규명할 목적으로 20wt% Pd 및 20wt% Cu의 용질농도구성비가 1이 되는 3원 합금과 여기에 2wt% Au의 첨가합금에 미치는 석출상의 영향을 분석, 조사하여 아래와 같은 결론을 얻었다. Ag-20wt% Pd-20wt% Cu 3원 함금은 ${\alpha}$의 단일상에서 Ag-rich의 ${\alpha}2$상 및 PdCu규칙상에 의하여 경화반응이 진행되며 연속승온과정에서 $100{\sim}300^{\circ}C$의 경도증가와 $300{\sim}500^{\circ}C$의 경도감소의 2단계 경화특성이 얻어졌다. 연속승온시효과정은 Au첨가에 관계없이 2단계의 석출반응이 저온영역에서는 stage I, stage II로 나타나고 stage I은 고온에서의 소입에 의해 도입된 과잉공공의 이동 및 소멸에 의한 반응이고 stage II는 평형농도의 공공확산에 의한 반응에 대응하였다. 또한 본 합금의 시효석출과정은 ${\alpha}\to{\alpha}+{\alpha}2+PdCu\to{\alpha}_1+{\alpha}_2+PdCu$이고 최대 경화는 ${\alpha}_1,\;{\alpha}_2$, PdCu의 3상공존구역에서 나타났다. 이들 석출반응은 입계반응이고 반응의 진행과 함께 경도값은 상승하며 경화능에 직접적으로 기여하였다. 또한 석출상은 미세한 lamella조직의 nodule을 나타내고 이들 ${\alpha}_1,\;{\alpha}_2$ 및 PdCu상과의 미세한 혼합상의 형성이 시효경화능에 기여하는 주된 원인이 되었다. 과시효는 lamella의 조대화와 PdCu상의 ${\alpha}_2$상으로의 용해에 따른 정량적 감소에 대응하였다. 본 합금의 시효열처리 온도는 $450^{\circ}C$가 적절하며 $1{\sim}120min$ 시효시간에 걸쳐서 소정의 경화특성을 얻을 수 있었다.

  • PDF