• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.305-310
• /
• 2004

The Hot Embossing Lithography(HEL) as a method for the fabrication of nanostructure with polymer is becoming increasingly important because of its simple process, low cost, high replication fidelity and relatively high throughput. In this study, we investigated the characteristics of hot embossing lithography as a nanoreplication technique. To grasp characteristics of nano patterning rheology by process parameters(embossing temperature, pressure and time), we have carried out various experiments by using the DVD(400nm pattern width) and Blu-ray nickel stamps(150nm pattern width). During the hot embossing process, we have observed the characteristics of the size effect. The quality of products made by hot embossing is affected by its cooling shrinkage. The demolding process at the glass transition temperature results in low quality because of the shrinkage of the polymer. Therefore, the quantification of the temperature condition is essential for the replication of high quality.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1036-1042
• /
• 2003

The hot embossing process has been mentioned as one of major nanoreplication techniques. This is due to its simple process, low cost, high replication fidelity and relatively high throughput. As the initial step of quantitating the embossing process , simple parametric study about embossing time have been carried out using high-resolution masters which patterned by the DRIE process and laser machining. Under the various embossing time, the viscous flow of thin PMMA films into microcavities during compression force has been investigated. Also, a study about simulating the viscous flow during embossing process has planned and continuum scale FDM analysis was applied on this simulation. With currently available test data and condition, simple FDM analysis using FLOW3D was made attempt to match simulation and experiment.

• 한국산학기술학회논문지
• /
• 제5권3호
• /
• pp.223-226
• /
• 2004

나노 패턴을 갖는 미세 구조물을 낮은 비용으로 생산하기 위해서는 플라스틱 재료를 이용하는 것이 필수적이고, 대량생산이 가능한 가공방법으로 사출성형 공정기술이 유망하다. 본 연구에서는 e-beam 리소그라피로 제작된 석영원판 내의 100-500nm크기의 선과 점 형상을 간단한 thermal embossing 공정을 이용하여 액상 PDMS를 고형화 시킨 후에 원판과 분리시켜 PDMS 몰드를 제작하였다. 실험결과, 원판에 있는 나노 크기의 다양한 패턴들은 PDMS 몰드에 균일하게 전사되었고, 이 몰드는 사출성형용 스탬퍼 제작에 유용하게 이용될 수 있을 것으로 사료된다.

• 한국재료학회지
• /
• 제15권9호
• /
• pp.589-593
• /
• 2005

Nanoimprinting lithography (NIL) is known as a suitable technique for fabricating nano and micro structures of high definition. Hot embossing is one of NIL techniques and can imprint on thin films and bulk polymers. Key issues of hot embossing are time and expense needed to produce a stamp withstanding a high temperature and pressure. Fabrication of a metal stamp such as an electroplated nickel is cost intensive and time consuming. A ceramic stamp made by silicon is easy to break when the pressure is applied. In this paper, a plastic stamp using a high temperature epoxy was fabricated and tested. The plastic stamp was relatively inexpensive, rapid to produce and durable enough to withstanding multiple hot embossing cycles. The merits of low viscosity epoxy solutions were a fast degassing and a rapid filling the microstructures. The hot embossing process with plastic stamp was performed on PMMA substrates. The hot embossing was conducted at 12.6 bar, $120^{\circ}C$ and 10 minutes. An imprinted PMMA wafer was almost same value of the plastic stamp after 10 times embossing. Entire fabrication process from silicon master to plastic stamp was completed within 12 hours.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.499-500
• /
• 2012

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.911-912
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.627-628
• /
• 2008

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.243-246
• /
• 2006

In this paper, Experimental results on the measurement of mechanical properties of fine patterns in the MEMS structure are described. The mechanical properties of embossing patterns on metallic thin foil is measured using the nano indentation system, that is developed by Korea Institute of Industrial Technology(KITECH). These micro embossing patterns are fabricated using CIP(Cold Isostatic Press) process on micro metallic thin foils(Al-1100) that are made by rolling process. These embossing patterned metallic thin foils(Al-1100) are used in the reflecting plate of BLU(Back Light Unit) and electrical/mechanical MEMS components. If these mechanical properties of fine patterns are utilized in a design procedure, the optimal design can be achieved in aspects of reliability as well as economy.

• Macromolecular Research
• /
• 제12권5호
• /
• pp.437-442
• /
• 2004

We have fabricated a polymeric waveguide by using a hot embossing technique and have investigated its propagation loss. The replication of waveguide channels through the use of a hot embossing technique is of interest as a single-step process that could deliver surface roughnesses far smaller than the wavelength. We have evaluated experimentally that the sidewall roughness has a dominant effect on insertion losses of the multimode polymeric waveguide. The propagation loss of the waveguide decreased dramatically upon decreasing the sidewall roughness of the channel. We have confirmed that the preparation of waveguides having nanometer-scale sidewall roughness and 0.1 dB/cm propagation loss is possible when using the hot embossing technique.

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.168-174
• /
• 2007

A ceramic glass mold was developed for micro hot-embossing and replicated polymer parts are fabricated. The glass-ceramic micro mold could be fabricated with a laser process and a wet etching process and the fabrication time could be saved a lot. Various polymer micro structures can be obtained by hot-embossing. The process parameters such as ho-embossing temperatures or pressures were investigated and optimized. This process can be applied for fabrication of micro structures for flip-chips or micro fluidic channels for bio-engineering. The advantages and disadvantages of this process are discussed, too.