• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.1132-1143
• /
• 2008

A single Column/Shaft which extended the pile to the column of the bridge with same diameter has better safety and economical profit, but it usually has larger lateral displacement due to lateral loads such as wind, earthquake, wave, etc. A series of horizontal pile load testing were performed to study the lateral behavior of single column/shaft with varying different free lengths and embedded pile lengths. Eight instrumented test piles were cast-in-placed by bonding strain gauges at certain locations on both faces of the pile to measure bending moment, from two-way loadings. Linear variable differential transformers(LVDTs) were installed to measure the lateral pile displacement. Based on this, it is found that the test single column/shaft with different free lengths shows different failure modes. If the test pile has a longer free length, the failure occurs at the near the ground surface, but the shorter one's failure occurs at the below the ground surface.

• The korean journal of orthodontics
• /
• v.44 no.1
• /
• pp.44-49
• /
• 2014

Objective: To evaluate the effects of ultrasonic instrumentation with different scaler-tip angulations on the shear bond strength (SBS) and bond failure mode of metallic orthodontic brackets. Methods: Adhesive pre-coated metallic brackets were bonded to 72 extracted human premolars embedded in autopolymerizing acrylic resin. The teeth were randomly divided into 3 groups (n = 24 each) to undergo no treatment (control group) or ultrasonic instrumentation with a scaler-tip angulation of $45^{\circ}$ ($45^{\circ}$-angulation group) or $0^{\circ}$ ($0^{\circ}$-angulation group). SBS was tested in a universal testing machine, and adhesive remnant index (ARI) scores were recorded. The Kruskal-Wallis test and Mann-Whitney U-test were used for statistical analysis. Results: The control group had a significantly higher mean SBS value than the treated groups, which showed no significant differences in their mean SBS values. The ARI scores were not significantly different among the groups. Conclusions: Ultrasonic instrumentation around the bracket base reduces the SBS of metallic orthodontic brackets, emphasizing the need for caution during professional oral hygiene procedures in orthodontic patients. The scaler-tip angulation does not influence the SBS reduction and bond failure mode of such brackets.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.5
• /
• pp.1229-1239
• /
• 1996

The increase of additional information broadcasting of TV demands a graphic overlay processor. This paper is about the design, implementation and testing of a graphic overlay processor called by KBPS decoder ASSP (Applicatio n Specific Standard Product) which is compliance with Korea Broadcast Programming System. KBPS decoder ASSP consists of embedded 8 bit microprocessor Z80, graphic overlay controller, KBPS schedule decoder, memory controller, priority interrupt controller, MIDI controller, infrared raccoon receiver, async scrial communication controller, timer, bus controller, universal parallel input-output port and serial-parallel interface. The 0.8 micron CMOS Sea of Gate is used to implement the ASSP in amount of about 31,500 gates, and it is running at 14.318MHz.

• Asia pacific journal of information systems
• /
• v.24 no.3
• /
• pp.371-391
• /
• 2014

A long-drawn out debate in the field of technology is whether it is value-neutral or value-laden. While some have argued that this debate has been resolved given the increasingly accepted view that technology is socially constructed, this is still not reflected in mainstream research which still assumes that technology is neutral. What is clear is that both views tend to be linked to studies that primarily focus on explicit forms of technology such as technological designs and their usage. These studies, though significant, may be limited in terms of an underemphasis on the process by which these technologies emerge, a process that requires decision-making activities made by different stakeholders and thus involves value judgments. In order to understand the extent of value-neutrality or value-ladenness of technologies, therefore, it is important to examine not only the final outcomes but also the process involved in technological development (including the artifacts created and used). In this study, we explored how values may be embedded in a specific IT application, and in cases of conflict of values, how they are prioritized. We did this in the context of applications development through an examination of the stages ranging from requirements analysis to coding to testing and deployment.

• The Journal of the Korea Contents Association
• /
• v.11 no.1
• /
• pp.9-15
• /
• 2011

Zero-watermarking is a digital watermarking technique that can escape from data distortion and quality degradation by no watermark insertion into digital images to be watermarked. This paper proposes DCT0CRT, a CRT-based zero-watermarking technique in the domain of DCT. One of the DC and low-frequency AC coefficients of each DCT block chosen in chaotic way from an image is selected by testing whether it satisfies the CRT-based condition matching with the watermark bit to be embedded. Such selection information forms a key to extract the watermark from the watermarked image. Experimental results show that the image quality watermarked by DCT0CRT is better than that watermarked by any other CRT-based watermarking techniques and the inserted watermark is robust against some common attacks such as sharpening, blurring, and JPEG lossy compression.

• Steel and Composite Structures
• /
• v.1 no.3
• /
• pp.329-340
• /
• 2001

Cyclic response of "shear" connections between steel outrigger beams and reinforced concrete core walls is presented in this paper. The connections investigated in this paper consisted of a shear tab welded onto a plate that was connected to the core walls through multiple headed studs. The experimental data from six specimens point to a capacity larger than the design value. However, the mode of failure was through pullout of the embedded plate, or fracture of the weld between the studs and plate. Such brittle modes of failure need to be avoided through proper design. A capacity design method based on dissipating the input energy through yielding and fracture of the shear tab was developed. This approach requires a good understanding of the expected capacity of headed studs under combined gravity shear and cyclic axial load (tension and compression). A model was developed and verified against test results from six specimens. A specimen designed based on the proposed design methodology performed very well, and the connection did not fail until shear tab fractured after extensive yielding. The proposed design method is recommended for design of outrigger beam-wall connections.

• Journal of the Optical Society of Korea
• /
• v.13 no.2
• /
• pp.193-200
• /
• 2009

A compact imaging spectrometer (COMIS) is currently under development for use in the STSAT3 microsatellite. COMIS images the Earth's surface and atmosphere with ground sampling distances of ${\sim}30m$ in the $18{\sim}62$ spectral bands ($4.0{\sim}1.05{\mu}m$) for the nadir looking at an altitude of 700 km. COMIS has an imaging telescope and an imaging spectrometer box into which three electronics PCBs are embedded. These are designed into a single assembly with dimensions of 35(L) $\times$ 20(W) $\times$ 12(H) $cm^3$ and a mass of 4.3 kg. Optomechanical design efforts are focused on manufacturing ease, alignment, assembly, testing and improved robustness in space environments. Finite element analysis demonstrates that COMIS will survive in launch and space environments and perform the system modulation transfer function (MTF) in excess of 0.29 at the Nyquist frequency of the CCD detector (38.5 lines-per-mm).

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.4
• /
• pp.457-462
• /
• 2011

The purpose of this study was to detect QTL for carcass quality on bovine chromosome (BTA) 6 using a high density SNP map in a Hanwoo population. The data set comprised 45 sires and their 427 Hanwoo steers that were born between spring of 2005 and fall of 2007. The steers that were used for progeny testing in the Hanwoo Improvement Center in Seosan, Korea, were genotyped with the 2,535SNPs on BTA6 that were embedded in the Illumina bovine SNP 50K chip. Four different linkage disequilibrium (LD) mapping models were applied to detect significant SNPs for carcass quality traits; the fixed model with a single marker, the random model with a single marker, the random model with haplotype effects using two adjacent markers, and the random model at hidden state. A total of twelve QTL were detected, for which four, one, three and four SNPs were detected on BTA6 under the respective models (p<0.001). Among the detected QTL, four, two, five and one QTL were associated with carcass weight, backfat thickness, longissimus dorsi muscle area, and marbling score, respectively (p<0.001). Our results suggest that the use of multiple LD mapping approaches may be beneficial in increasing power to detect QTL given a limited sample size and magnitude of QTL effect.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.463-465
• /
• 2005

내장형 시스템의 요구사항이 복잡해짐에 따라 신뢰성이 높은 소프트웨어 생산이 어려워지고 있다. 본 논문은 신뢰성 높은 내장형 시스템의 소프트웨어를 생산을 위해 교차 컴파일 환경에서 사용 가능한 소프트웨어 테스팅 도구를 제안한다. 일반적으로 테스팅 도구는 독자적인 테스트 스크립트를 사용한다. 그러므로 테스팅을 하고자하는 개발자는 테스팅 도구에서 사용하는 테스트 스크립트를 학습하여야한다. 즉, 개발자가 기존의 테스트 도구를 사용하기 위해서는 새로운 스크립트 언어를 학습해야 하는 부담을 가지고 있다. 본 논문에서 제안하는 시스템은 이러한 단점을 극복하기 위해서 개발자에게 친숙한 XML을 이용하여 테스트 스크립트를 설계한다. XML은 마크 업 언어의 표준으로 다양한 응용을 가지고 있고 다른 형태의 포맷으로 쉽게 변환 가능하다는 장점을 가지고 있다. 또한, GUI 기반의 테스트 스크립트 생성기를 제공하여 개발자에게 직관적인 테스트 스크립트 작성을 할 수 있도록 제안한다. 그리고 기존의 테스트 스크립트와 달리 테스트 스크립트 언어 레벨에서의 테스트 분기를 제공하고 있어 테스트 결과에 따른 다양한 테스트를 실시할 수 있다. 본 테스팅 도구는 개발자에게 테스트 드라이버 작성을 위한 노력을 줄여 더욱 질 좋은 프로그램을 생성하는데 기여할 것으로 기대된다.

• Nuclear Engineering and Technology
• /
• v.46 no.5
• /
• pp.667-674
• /
• 2014

One of the largest problems for tokamak devices such as Kazakhstan Tokamak for Material Testing (KTM) is the operation scenarios' development and execution. Operation scenarios may be varied often, so a convenient hardware and software solution is required for scenario management and execution. Dozens of diagnostic and control subsystems with numerous configuration settings may be used in an experiment, so it is required to automate the subsystem configuration process to coordinate changes of the related settings and to prevent errors. Most of the diagnostic and control subsystems software at KTM was unified using an extra software layer, describing the hardware abstraction interface. The experiment sequence was described using a command language. The whole infrastructure was brought together by a universal communication protocol supporting various media, including Ethernet and serial links. The operation sequence execution infrastructure was used at KTM to carry out plasma experiments.