• ETRI Journal
• /
• v.36 no.5
• /
• pp.808-818
• /
• 2014

To deal with the major challenges of embedded sensor networks, we consider the use of magnetic fields as a means of reliably transferring both information and power to embedded sensors. We focus on a power allocation strategy for an orthogonal frequency-division multiplexing system to maximize the transferred power under the required information capacity and total available power constraints. First, we consider the case of a co-receiver, where information and power can be extracted from the same signal. In this case, we find an optimal power allocation (OPA) and provide the upper bound of achievable transferred power and capacity pairs. However, the exact calculation of the OPA is computationally complex. Thus, we propose a low-complexity power reallocation algorithm. For practical consideration, we consider the case of a separated receiver (where information and power are transferred separately through different resources) and propose two heuristic power allocation algorithms. Through simulations using the Agilent Advanced Design System and Ansoft High Frequency Structure Simulator, we validate the magnetic-inductive channel characteristic. In addition, we show the performances of the proposed algorithms by providing achievable ${\eta}$-C regions.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.5
• /
• pp.209-217
• /
• 2012

In the present, Wireless Sensor Network(WSN) has been used for the purpose of the military operation with surveillance systems and for collecting useful information from the natural environment. Basically, low-power, easy deployment and low cost are the most important factors to be deployed for WSNs. Lots of researches have been studied to meet those requirements, especially on the node capacity and battery lifetime improvements. Recently, the study of wireless mesh networks applied into the surveillance systems has been proceeded as a solution of easy deployment. In this paper, we proposed large-scale intelligent multi-layer surveillance systems based on QoS assuring Wireless Mesh Networks and implemented them in the real testbed environment. The proposed system explains functions and operations for each subsystem as well as S/W and H/W architectures. Experimental results are shown for the implemented subsystems and the performance is satisfactory for the surveillance system. We can identify the possibility of the implemented multi-layer surveillance system to be used in practice.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.4
• /
• pp.187-191
• /
• 2012

In these days, there are huge increases of concerning underwater acoustic sensor networks (UWASNs) to explore marine resources and to monitor climate change. To collect information from sensor nodes which are randomly deployed in underwater, Multi-Dimensional Scaling (MDS) based locating methods have been recently introduced, which consider sound speed to be constant in underwater. However, underwater sound speed tends to vary depending on underwater environment factors, such as depth, temperature, and salinity. In this paper, we propose a method considering environment factors, can influence upon sound speed in underwater, and introduce experimental setup which can follow up environmental factors.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.18 no.2
• /
• pp.67-73
• /
• 2023

Tree routing is one of appropriate routing schemes in wireless sensor network because the complexity of this approach is relatively low. But, congestion at a specific node may happen because a parent node toward a sink node is usually selected in one hop way, specially where large number of node are deployed. As feasible solution for this problem, multiple paths and sinks schemes can be applied. However, the performance of these schemes are not proved and analyzed yet. In this paper, we conduct diverse simulaton scenarios performance evaluation for these cases to identify the improvement and analyze the impact of schemes. The performance is measured in the aspects of packet transmission rate, throughput, and end-to-end delay as a function of amount of network traffic.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.12
• /
• pp.2563-2567
• /
• 2011

Advances in smart sensors, embedded systems, low-power design, ad-hoc networks and MEMS have allowed the development of low-cost small sensor nodes with computation and wireless communication capabilities that can form distributed wireless sensor networks. Time information and time synchronization are fundamental building blocks in wireless sensor networks since many sensor network applications need time information for object tracking, consistent state updates, duplicate detection and temporal order delivery. Various time synchronization protocols have been proposed for sensor networks because of the characteristics of sensor networks which have limited computing power and resources. However, none of these protocols have been designed with time representation scheme in mind. Global time format such as UTC TOD (Universal Time Coordinated, Time Of Day) is very useful in sensor network applications. In this paper we propose network time protocol extension for global time presentation in wireless sensor networks.

• Smart Structures and Systems
• /
• v.1 no.1
• /
• pp.63-82
• /
• 2005

This paper introduces a technology for robust and low maintenance cost sensor network capable to detect accelerations below a micro-g in a wide frequency bandwidth (above 1,000 Hz). Sensor networks with such performance are critical for navigation, seismology, acoustic sensing, and for the health monitoring of civil structures. The approach is based on the fabrication of an array of high sensitivity accelerometers, each utilizing Fabry-Perot cavity with wavelength-dependent reflectivity to allow embedded optical detection and serialization. The unique feature of the approach is that no local power source is required for each individual sensor. Instead one global light source is used, providing an input optical signal which propagates through an optical fiber network from sensor-to-sensor. The information from each sensor is embedded onto the transmitted light as an intrinsic wavelength division multiplexed signal. This optical "rainbow" of data is then assessed providing real-time sensing information from each sensor node in the network. This paper introduces the Fabry-Perot based accelerometer and examines its critical features, including the effects of imperfections and resolution estimates. It then presents serialization techniques for the creation of systems of arrayed sensors and examines the effects of serialization on sensor response. Finally, a fabrication process is proposed to create test structures for the critical components of the device, which are dynamically characterized.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.1025-1026
• /
• 2015

With the development of sensor, wireless mobile communication, embedded system and cloud computing, the technologies of Internet of Things have been widely used in real word. Connecting wireless sensor networks with traditional communication networks or Internet, IoT gateway plays an important role in IoT applications. It facilitates the integration of wireless sensor networks and mobile communication networks or Internet. The IoT gateway is a key component in IoT application systems. But It has lot of security issues. We analyzed the issues of security and privacy.

• Journal of Communications and Networks
• /
• v.17 no.6
• /
• pp.647-655
• /
• 2015

Low-power and lossy networks (LLNs) comprised of thousands of embedded networking devices can be used in a variety of applications, such as smart grid automated metering infrastructures (AMIs) and wireless sensor networks. Connecting these LLNs to the Internet has even greater potential, leading to the emerging concept of the Internet of Things (IoT). With the goal of integrating LLNs into IoT, the IETF has recently standardized RPL and 6LoWPAN to allow the use of IPv6 on LLNs. Although there already exist several studies on the the performance of RPL and embedded IPv6 stack in LLN, performance measurement and characterization of TCP over RPL in multihop LLNs is yet to be studied. In this article, we present a comprehensive experimental study on the performance of TCP over RPL in an embedded IPv6-based LLN running over a 30-node multihop IEEE 802.15.4 testbed network. Our results and findings are aimed at investigating how embedded TCP interoperates with common Linux TCP and underlying RPL (and vice versa), which furthers our understanding of the performance trade-offs when choosing TCP over RPL in IPv6-based LLNs.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.1
• /
• pp.13-20
• /
• 2008

Sensor network consists of a large number of sensor node distributed in the environment being sensed and controlled. The resource-constrained sensor nodes tend to have various and heterogeneous architecture. Thus, it is important to make its software environment platform-independent and reprogrammable. In this paper, we present BeeVM, a Java operating system designed for sensor networks. BeeVM offers a platform-independent Java programming environment with its efficiently executable file format and a set of class APIs for basic operating functions, sensing and wireless networking. BeeVM's high-level native interface and layered network subsystem allow complex program for sensor network to be short and readable. Our platform has been ported on two currently popular hardware platforms and we show its effectiveness through the evaluation of a simple application.

• Smart Structures and Systems
• /
• v.10 no.3
• /
• pp.209-228
• /
• 2012

Structural health monitoring with wireless sensor networks has received much attention in recent years due to the ease of sensor installation and low deployment and maintenance costs. However, sensor network technology needs to solve numerous challenges in order to substitute conventional systems: large amounts of data, remote configuration of measurement parameters, on-site calibration of sensors and robust networking functionality for long-term deployments. We present a structural health monitoring network that addresses these challenges and is used in several deployments for monitoring of bridges and buildings. Our system supports a diverse set of sensors, a library of highly optimized processing algorithms and a lightweight solution to support a wide range of network runtime configurations. This allows flexible partitioning of the application between the sensor network and the backend software. We present an analysis of this partitioning and evaluate the performance of our system in three experimental network deployments on civil structures.