• Journal of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.183-190
• /
• 1985

The elution behaviors of the rare earths was carried out in the iminodiacetic acid solution of various pH as eluent using ion exchange resin. The optimum eluent for the quantitative separation of $Eu^{3+},\;Pr^{3+},\;Ce^{3+}\;and\;La^{3+}$ were 0.0301M IMDA solution of pH 8.00 and 9.00 at 5cm column of the resin Dowex 50${\times}$8 (100-200 mesh). The elution order of the rare earth elements was in order of the atomic number of those elements. From the elution behavior of rare earth and u.v spectrum we found that the complexed rare earth species with IMDA changed according to pH of IMDA.

• Journal of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.328-333
• /
• 1987

1-eicosylsulfate($C_{20}H_{41}SO_4^-$) was coated onto 5 ${\mu}m$ C18 reversed phase column. Adsorption equilibrium was reached when 1.2l of $1.46{\times}10^{-4}M$ in 25% acetonitrile solution passed through the column. This coated column proved to be stable up to 10l of 0.05 M ${\alpha}$-HiBA eluent used. The column efficiencies of Eu, Nd, Ce and La measured were about 0.04 mm of HETP using 0.15M ${\alpha}$-HiBA eluent at a flow rate of 1.0ml/min. This column was used to separate some lanthanides and transition metal ions, andmshowed an excellent resolution, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.5
• /
• pp.694-698
• /
• 2006

A method has been described for the chemical speciation, preconcentration and determination of Cr(III) and Cr(VI) species in filtered tannery waste waters by flame atomic absorption spectrometry using ion-exchange resins. Amberlite IR-120($H^+$) strongly acidic cation exchanger and Amberlite IRA-410($CI ^-$) strongly basic anion exchanger resins were used for the separation and preconcentration of Cr(III) and Cr(VI) species, respectively. Optimum condition for preconcentration and speciation was obtained by testing pH of sample and eluent, flow rates of sample and eluent, amount of resins, volume of sample and eluents, and effect of foreign ions. The recommended method has been successfully applied for the preconcentration and determination of chromium species in the dissolved phase of waste water samples collected from a tannery waste water treatment plant in Kayseri, Turkey. The detection limits achieved were 0.73 $\mu$g/L for Cr(III) and 0.81 $\mu$g/L for Cr(VI). Recovery studies showed 99% for Cr(III) and 98% for Cr(VI), for samples spiked with single species.

• Analytical Science and Technology
• /
• v.9 no.1
• /
• pp.1-12
• /
• 1996

The thermally labile compounds with hydroxyl group generate the [${MNH_4}^+$] ion, [$MH^+$] and [$MH^+-OH$] ion by ion-molecule reaction in LC/TSP/MS. But these ions create the trouble in the estimation of molecular weight of an unknown compound because the margin of [${MNH_4}^+$] ion and [$MH^+$] ion is same to that of [$MH^+$] ion and [$MH^+-OH$] ion. If it is compensated for the results by using of the $CF_3COOD+NH_4OH$ LC eluent, the molecular weight of analyte will be able to be confirmed. And this study was tried to recognize whether the fragment ions of thermally labile compound are generated by electron impact or by thermal degradation in ion source.

• Analytical Science and Technology
• /
• v.30 no.4
• /
• pp.167-173
• /
• 2017

In the era of the forth Industrial Revolution, open source code and open source hardware have gained much attention. In particular, 3D printing technology is expanding into the realms of classical science, technology and our daily lives. Relatedly, in the present study, we demonstrate the manufacture of a nano-LC MALDI spotter robot using 3D printing technology. The parts of the spotter robot were either made using a 3D printer or purchased as 3D printer parts from the 3D printer online market, so that anyone can make the robot without a deep knowledge of engineering or electronics, i.e., DIY (do-it-yourself) product. In the nano-LC MALDI spotter, the nano-LC eluent and MALDI matrix were mixed in a T-union and discharged from the capillary outlet. The eluent and matrix mixture could be spotted onto the movable MALDI plate. The MALDI plate was designed to translate in a two-dimensional space (xy plane), which was enabled by the movements of two stepper motors. In the paper, all computer-aided design (CAD) files for the parts and operation software are provided to help the reader manufacture their own spotter robot.

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.1
• /
• pp.24-31
• /
• 1994

Hourly variation of gaseous nitrous acid( HNO$_2$) concentration in Seoul air was monitored from Jan. 11 to SeP. 12, Nitrous acid concentration was determined by DS/IC over nine months of observation, HNO$_2$ range from 0.04 ppb to 5.5 ppb. Gor-tex tube as gaseous HNO$_2$generator in this study is thought to be more convenient and reproducible device than previous generator. As a result of NaOH instead of Na$_2$ CO$_3$/NaHCO$_3$ solution as the IC eluent, we could obtain more stable baseline. The concentration of the NaOH eluent was 15 mM . The limit of detection(3$\sigma$) of the liquid- Phase and gas phase nitrous acid of this method are 1.1ng/$m\ell$ , 0.04 n $\ell$ / $\ell$, respectively. The precisions evaluated by 10 replicate analysis of standard solution and standard gas generated are $\pm$1.59, $\pm$2. 89% RSD, respectively. Due to the lack of standard material for air, direct assessment of the accuracy was not possible. This study was applied to the analysis of Seoul ambient air and their results are reported herein.

• Journal of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.63-68
• /
• 1986

Elution behavior of rare earth elements have been investigated with the EDTA solution as an eluent using cation exchange resin. Definite amount of the complexed rare earth ions at pH 8.4 is adsorbed through the cation exchanger containing cupric ion as a retaining ion and eluted with EDTA solution. The rare earth ions are eluted more rapidly in the above method than in the method in which uncomplexed rare earth ions are adsorbed on the cation exchange resin bed. In this method, the elution time and amount of eluent are saved but the resolution values also decreased a little. The elution order of complexed ion was determined in accordance with the stability constant of complexes with rare earth elements.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.9
• /
• pp.1324-1328
• /
• 2003

The simultaneous determination of anions ($SO_4 ^{2-},\;Cl^-,\;and\;NO_3^-$) and cations ($Na^+,\;NH^{4+},\;K^+,\;Mg^{2+},\;and\;Ca^{2+}$) in natural water obtained by Nakdong River waters system in Korea were performed by ion-exclusion/cationexchange chromatography with conductimetric detection. The stationary phase was a polymethacrylate-based weakly acidic cation-exchange resin column in the $H^+$-form and a weak-acid eluent. When using only a 1.4 mM sulfosalicylic acid/6 mM 18-crown-6 ether as an eluent, good resolution of both anions and cations, minimum time required for the separation, and satisfactory detection sensitivity were obtained in a reasonable time. The method was successfully applied to the simultaneous determination of anions and cations in natural waters.

• Journal of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.44-50
• /
• 1990

The liquid chromatographic retention behavior of structural isomers of phenols was investigated by a change of the mobile phase properties. The retention behavior of structural isomer of phenols in reversed phase liquid chromatography was affected by eluent electrolyte added. It can be seen that this behavior is illustrated by a mechanism of Langmuir isotherm and ion exchange between phenolate and the reversed phase coated with ions. The retention behavior was represented as two different areas according to the concentration of the electrolytes. These areas can be explained as counter ion and co-ion effect, respectively. The maximum retention values were dependent not upon the kinds of organic modifier but upon the kinds of electrolyte.

• Journal of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.232-237
• /
• 1989

The elution mechanism of rare earth elements in cation exchange resin which was substituted with $NH_4^+,\;Zn^{2+}\;or\;Al^{3+}$ as a retaining ion had been investigated. Rare earths or rare earths-EDTA complex solution was loaded on the top of resin bed and eluted with 0.0269M EDTA solution. When the rare earth-EDTA complex was adsorbed on the $Zn^{2+}\;or\;Al^{3+}$ resin form, retaining ion was complexed with EDTA and liberated rare earths was adsorbed in the resin again. Adsorbed rare earths in resin phase could be eluted by the complexation reaction with EDTA eluent. On $NH_4^+$ resin form, the rare earth-EDTA complex which had negative charge could not adsorbed on the cation exchange resin because the complexation reaction between $NH_4^+$ and EDTA was impossible. So the elution time was much shorter than in $Zn^{2+}\;or\;Al^{3+}$ resin form. When the rare earths solution was loaded on the $Zn^{2+},\;Al^{3+}$ resin form bed, rare earths was adsorbed in the resin and the retaining ion was liberated. Adsorbed rare earths in resin bed was exchanged by EDTA eluent forming rare earths-EDTA complex, and eluted through these processes. On $NH_4^+$ resin form, rare earths loaded was adsorbed by exchange reaction with $NH_4^+$. As the EDTA eluent was added, rare earths was liberated from resin forming negatively charged rare earth-EDTA complex and eluted without any exchange reaction. So the elution time was greatly shortened and there was no metallic ion except rare earths in effluent. When the $Zn^{2+}\;and\;Al^{3+}$ was used as retaining ion, the pH of efflent was decreased seriousely because the $H^+$ liberated from EDTA molecule.