• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.7 no.5
• /
• pp.43-50
• /
• 1993

본 논문에서는 인버어터의 출력 파형에 포함되는 고조파를 제거하기 위하여, 디지틀 소프트웨어에 의한 NPC(Neutral Point Clamped) PWM 인버어터 제어기법을 제시하였다. 제안한 기법은 고조파 전류율과 파형 왜율을 낮출 수 있고, 인버어터의 성능을 크게 개선할 수 있다. 주파수 비를 36으로 하고, 변조지수를 1.2∼2.0의 범위에서 제어하였을 때, 대부분의 고조파 성분을 제거할 수 있고 기본파 성분의 크기를 최대로 출력할 수 있다.

• Journal of Information Technology Services
• /
• v.2 no.2
• /
• pp.111-119
• /
• 2003

In this paper, an efficient block matching algorithm which is based on the Block Sum Pyramid Algorithm (BSPA) is presented. The cost of BSPA[1] was reduced in the proposed algorithm by using l2 norm and partial distortion elimination technique. Motion estimation accuracy of the proposed algorithm is equal to that of BSPA. The efficiency of the proposed algorithm was verified by experimental results.

• Journal of Information Display
• /
• v.3 no.3
• /
• pp.12-16
• /
• 2002

We first review a real-time three-dimensional (3-D) holographic recording technique called optical scanning holography (OSH) and discuss holographic reconstruction using spatial light modulators (SLMs). We then present how the overall system can be used for 3-D holographic television (TV) display with a wide-angle view of a 3-D image, and address some of the issues encountered. Finally, we suggest some techniques to alleviate the issues encountered in such a 3-D holographic TV system.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.209-210
• /
• 2007

Obtained disparity map from the stereo camera by using the several stereo matching algorithms carries lots of noise because of various causes. In our approach, mode filtering and noise elimination technique using the histogram and projection-based region merging methods are adopted for improving the quality of disparity map and image segmentation. The proposed algorithms are implemented in VHDL and the real-time experimentation shows the accurately divided objects.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10b
• /
• pp.709-711
• /
• 2003

위성기술의 발달로 대규모의 고해상도 지형정보 생성이 가속화되고, 사실적 지형묘사 요구는 더욱 높아지고 있으므로 대규모 지형자료를 효율적으로 처리하여 실제감(realism)을 주는 실시간 렌더링 기법이 필수적이다. 본 연구에서는 지형 셀의 쿼드트리 구조를 기반으로 시각 거슬림 현상을 최소화하기 위한 연속적인 다단계 상세도 기법 및 기하모핑 기법을 적용할 때 발생할 수 있는 기하모핑 크랙을 제거하기 위한 확장된 기법을 제안한다.

• Korean Journal of Remote Sensing
• /
• v.6 no.1
• /
• pp.1-9
• /
• 1990

This paper presents a method of the constructing DEM(Digital Elevation Model) from the image data acquired from a commercial map using the scanner. Data acquistion, mark elimination, linking the broken line, elevation interpolation and 3D display processing are performed and the results are satisfatory.

• Journal of the Korean Society of Safety
• /
• v.36 no.3
• /
• pp.50-59
• /
• 2021

The main purpose of accident analysis is to identify the causal factors and the mechanisms of those factors leading to the accident. However, current accident analysis techniques focus only on finding the factors related to the accident without providing more insightful results, such as structures or mechanisms. For this reason, preventive actions for safety management are concentrated on the elimination of causal factors rather than blocking the connection or chain of accident processes. This greatly reduces the effectiveness of safety management in practice. In the present study, a technique to model the correlational structure of accident risk factors is proposed by using the co-occurrence keyword network analysis technique. To investigate the effectiveness of the proposed technique, a case study involving a portable ladder fall accident is conducted. The results indicate that the proposed technique can construct the correlational structure model of the risk factors of a portable ladder fall accident. This proves the effectiveness of the proposed technique in modeling the correlational structure of accident risk factors.

• Environmental Engineering Research
• /
• v.11 no.5
• /
• pp.285-291
• /
• 2006

Biofiltration is a simple, effective, economically viable and the most widely used gas treatment technique for treating malodors at low concentrations and high flow rates. This paper reports the performance of two lab scale immobilized cell biofilters operated in continuous mode for hydrogen sulfide ($H_2S$) and ammonia ($NH_3$) removal. The removal efficiency (RE, %) and the elimination capacity (EC, $g/m^3{\cdot}hr$) profiles were monitored by subjecting the biofilters to different loading rates of $H_2S$ (0.3 to $8\;g/m^3{\cdot}hr$) and $NH_3$ (0.3 to $4.5\;g/m^3{\cdot}hr$). The removal efficiencies were greater than 99% when inlet loading rate to the biofilters were upto $6\;gH_2S/m^3{\cdot}hr$ and $4\;gNH_3/m^3{\cdot}hr$ respectively. The performance of the biofilters were also ascertained by conducting shock loading studies at a loading rate of $10\;gH_2S/m^3{\cdot}hr$ and $6\;gNH_3/m^3{\cdot}hr$. The results from this study show high removal efficiency, good recuperating potential and stability of the immobilized microbial consortia to transient shock loads.

• Smart Media Journal
• /
• v.4 no.1
• /
• pp.33-38
• /
• 2015

In this paper, we propose the methods not only to eliminate ELF(Extremely Low Frequency) EMI(Electro-Magnetic Interference) noice for extending recognition distance, but also to utilize the the PLN for detecting starting instance of a hand gesture using electric potential sensor. First, we measure strength of electric field generated in the smart devices such as TV and phone, and minimize EMI through efficient arrangement of the sensors. Meanwhile, we utilize the 60 Hz PLN to extract the starting point of hand gesture. Thereafter, we eliminate the PLN generated in the smart device and circuit of sensors. And then, we shield the sensors from an electric noise generated from devices. Finally, through analyzing the frequency components according to the gesture of target, we use the low pass filter and the Kalman filter for elimination of remaining electric noise. We analyze and evaluate the proposed ELF-band EMI eliminating method for non-contact remote sensing of the EPS(Electric Potential Sensor). Combined with a detecting technique of gesture starting point, the recognition distance for gestures has been proven to be extended to more than 3m, which is critical for real application.

• Korean Journal of Plant Resources
• /
• v.23 no.3
• /
• pp.233-241
• /
• 2010

In vitro elimination of Sweet potato leaf curl virus (SPLCV) from infected sweet potato is difficult due to low number of virus-free plants obtained from meristem tip culture and long growth period required for the virus detection. In this study, efficient production of the SPLCV-free sweet potato by in vitro therapy coupled with a PCR assay for virus detection was investigated. Infected shoots cultured on Murashige and Skoog medium were treated at three different temperatures for 7 weeks followed by meristem tip culture on the medium with or without ribavirin at 50 mg/L. The regenerated plantlets were tested for virus infection by a PCR assay. The results showed that the both heat- and cold-treatments, and addition of the ribavirin did not have significant effect on efficiency of the virus elimination. The meristem size, however, greatly affected the survival rate. Meristems sized over 0.4 mm survived better than smaller ones (0.2-0.3 mm). The PCR assay was approved to be a rapid, sensitive and reliable for the SPLCV detection in regenerated plantlets. Therefore, combination of cultivating meristem tips sized 0.4-0.5 mm on the medium at $22^{\circ}C$ without ribavirin and detection of SPLCV in the regenerated plantlets by the PCR assay was an efficient system for the SPLCV elimination from infected sweet potato.