• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.614-617
• /
• 1995

The unbalance heavy-load elevation driving systems are composed of rotating link-mechanism and hydraulic cylinder which actuates elevation and compensates the static unbalance moment of supporting mechanism. Control and compensation of gun driving is very difficult because these mechanism imply highly nonlinearities due to hydraulic fluid characteristics and mechanical rotation of link-mechanism. In this study, through the analysis of manufactured link-mechanism, the optimal link-mechanism design of the elevating system is suggested. Also to estimate the control performance of the unbalance heavy-load elevation servo-control driving system, modeling and simulation of the system are carried out. To prove the reliability of performance estimation program,simulation results are compared with the experimental results. Both results are similar, therefore this program will be helpful to study the control performance improvement of the system.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.9 no.2
• /
• pp.152-155
• /
• 1998

Laryngeal framework surgery to improve change the voice is a challenging development in phoniatric surgery. Basically two categories can be distinguished : (1) attempted medialization of the vocal fold, as for the treatment of paralytic dysphonias (2) adjustment of the vocal fold's tension of transsexuals or mutational dysphonia. Vocal pitch can be elevated by various surgical technique 1) cricothyroid approximation 2) A-P expansion of the thyroid ala 3) longitudinal incision in the cords 4) intrachondral injection of the steroid, and 5) evaporation of the cords by $CO_2$ laser. We have experienced a case of pitch elevation procedure after transsexual operation. After transsexual operation, he had received anterior commissure laryngoplasty modified from Le Jeune with no change in voice pitch(Fo=110Hz). 8 monthes later, he had received cricothyroid approximation resulting in pitch elevation(Fo=160Hz).

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.259-261
• /
• 2008

GIS-based spatial data integration tasks have used exhaustive thematic maps generated from sparsely sampled data or satellite-based exhaustive data. Due to a simplification of reality and error in mapping procedures, such spatial data are usually imperfect and of different accuracy. The objective of this study is to carry out a sensitivity analysis in connection with input topographic data for landslide hazard mapping. Two different types of elevation estimates, elevation spot heights and a DEM from ASTER stereo images are considered. The geostatistical framework of kriging is applied for generating more reliable elevation estimates from both sparse elevation spot heights and exhaustive ASTER-based elevation values. The effects of different accuracy arising from different terrain-related maps on the prediction performance of landslide hazard are illustrated from a case study of Boeun, Korea.

• Korean Institute of Interior Design Journal
• /
• no.23
• /
• pp.41-49
• /
• 2000

Contemporary architecture is developing aspects of variety design. In spite of elevation is important section to express main concepts, it difficults to limit because it decisions inclusively elements. This thesis is on way to understand variety and dimness expression of architecture. The scope of this thesis is the analysis of Korean single housing. The components of elevation are mass, roof, shape of windows, materials, shape of floor plan. The analised types of expression are rationallity, technique, tradition of types of expression, the latter is harmony, revolution in the opposite direction of types of expression. The types of expression in elevation of Korean single housing have characteristic components. Elevation has important a matter on design process, I extect to reflect result of thesis to housing plan.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.2
• /
• pp.113-123
• /
• 2010

The goal of this study is to analyze an effect of productivity elevation. For the goal, the various methods of the productivity elevation were suggested and the system improvements were conducted. The S company was established in Ban-Wol Industrial Complex, Ansan-City, Kyonggi-Do on 2007. The company was hiring 22 employees. The main manufactures were heavy duty equipment parts and the amount of sale was two billion won on 2008. Problems which the company faced were ambiguous production target management and materials loss. To solve the problems, NCT work improvement and automatic welding were induced. There were steel saving of 3,780,000won/month and man-hour saving of 144,000won/month by redesign of the steel sheet for the NCT steel job. Also, changing from handwork to automatic welding, the man-hour saving for the welding job was 320M/H and saving of 4,225,600won/month. The others of systematic improvement for productivity elevation were usage of jig and daily equipment checklist.

• Journal of the Korean housing association
• /
• v.15 no.3
• /
• pp.53-62
• /
• 2004

Recently the landscape of housing has been emphasized. This trend seems to reflect the negative aspects of housing landscape in urban area. Throughout the analysis on the various visual density index, the following findings were obtained; 1) Elevation blockage ratio(EBR) was permitted differently according to the types of housing blocks, and the preference of block layout was different to the location of site. 2) EBR regulation level was acceptable. But 40m level of general area should be stepped up to the 35m level. 3) The correlation between the floor area ratio(FAR) and the EBR was not high. Therefore it is reasonable to regulate the EBR to the location. 4) Elevation coverage ratio(ECR) was highly correlated with the FAR. It means that FAR can substitute for the ECR, and ECR should be regulated to the level of FAR.

• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.2
• /
• pp.122-128
• /
• 2016

The purpose of this study is to improve the firing elevation driving method for towed howitzer to prevent the musculoskeletal disorders. To adjust the firing elevation, it is required to rotate the hand wheel and this work has been done manually in the firing test range as the same method as field artillery troops. In the firing test range, the motor-driven firing elevation adjustment device was developed to improve the working efficiency and safety. These were compared by using posture classification scheme of RULA and REBA. It was measured elapsed time to investigate the improved operational efficiency. The optimal posture of upper body to operate the hand wheel for field artillery troops was proposed.

• Journal of Ecology and Environment
• /
• v.38 no.4
• /
• pp.451-459
• /
• 2015

We investigated the pattern of floral diversity including naturalized plant species and three ecological factors (area, elevation and distance from mainland) of plant species on 53 uninhabited islands in Gyungsangnam-do, southeastern South Korea. A total of 206 taxa in 67 families were observed, and the species of Compositae was most common. Thirteen taxa in eight families of the naturalized plants were observed on 33 islands. The numbers of total plant species, area and elevation were significantly correlated, but no relationship with distance from the mainland was observed. In addition, no relationship was found among the numbers of naturalized plants, area and elevation. However, the average rate of naturalization on islands with different elevations differed significantly, indicating the smallest proportion of naturalized plant species was on high islands. Multiple regression of total species richness identified elevation as a significant factor, while no significant variables were correlated with naturalized plant species. Nonmetric multidimensional scaling (NMS) ordination identified three major variables, distance from mainland, number of naturalized plant species and elevation. These findings indicate that the geography of islands such as area and elevation affected the species richness of plants on uninhabited islands, while human disturbance had a greater effect than geography on the species richness of naturalized plants on islands in southeastern South Korea.

• KIEAE Journal
• /
• v.8 no.5
• /
• pp.43-48
• /
• 2008

This study is about offering quantitatively analytic frame of streetscape, and also about making a way to be standardized and adapt changing landscape. This allows us to manage a form of elevation map after the application to GIS. The form of elevation map is a visible and vertical arrangement method of data recognizable while walking or driving. Applying measurable traits enables us to make a quantitative control over each element of which streetscape consists. After all, it would play a great roll in organizing and maintaining fine streetscape of each city. As the basic ways to make the elevation map, this study proposes the methods of providing quantitative analytic frame of streetscape after applying elevation data, Raster Data and Vector Data, which were investigated on the basis of GIS. In addition, as a simulation for increasing reality, certain streets, where the streetscape is very important, were chosen so that they enable us to utilize quantitatively analytic data of streetscape with analyzing the +degree of opening ratio in the boundary of D/H=2, comparing between wall area and windowpane area, comparing between facade area and sign board area, and calculating both area and ratio which are applied to ecospace.

• Journal of the Korean housing association
• /
• v.21 no.5
• /
• pp.23-33
• /
• 2010

In the late twentieth century, the multistory housing has become the most preferred housing type. Moreover, in multistory housing design, not only interior design but also exterior design, uniqueness and characteristic have been added as significant factors in design to break simplicity and uniformity. The purpose of this study is to understand the tendency of the elevation design in Europe and to suggest the idea for elevation design for domestic. Also, each elements of elevation were analyzed through classification and schematization which categorized by its own characteristic. Design elements can be classified into three categories. They are corresponding with inner spaces, emphasizing visual expression of exterior material and texture, and presenting aesthetic factors of building shape. Those are named as the Spatial Externalization, the Visual Expression, and the Expression of Building Shape. In this frame nineteen elevations of sixteen different cases were analysed. As a result of case studies, it is clear that elevation designs were not standardized and each cases has its own characteristics. Also it showed how the each design elements can be coordinated as a total design and how they expressed identities of each housing. This study could contribute to motivate diversifying the design of multistory housing.