• Corrosion Science and Technology
• /
• v.15 no.3
• /
• pp.120-124
• /
• 2016

The effect of alloying element Ca (0, 1, and 2 wt%) on corrosion resistance and bioactivity of the as-received and anodized surface of rolled plate AM60 alloys was investigated. A plasma electrolytic oxidation (PEO) was carried out to form anodic oxide film in $0.5mol\;dm^{-3}\;Na_3PO_4$ solution. The corrosion behavior was studied by polarization measurements while the in vitro bioactivity was tested by soaking the specimens in Simulated Body Fluid (1.5xSBF). Optical micrograph and elemental analysis of the substrate surfaces indicated that the number of intermetallic particles increased with Ca content in the alloys owing to the formation of a new phase $Al_2Ca$. The corrosion resistance of AM60 specimens improved only slightly by alloying with 2 wt% Ca which was attributed to the reticular distribution of $Al_2Ca$ phase existed in the alloy that might became barrier for corrosion propagation across grain boundaries. Corrosion resistance of the three alloys was significantly improved by coating the substrates with anodic oxide film formed by PEO. The film mainly composed of magnesium phosphate with thickness in the range $30-40{\mu}m$. The heat resistant phase of $Al_2Ca$ was believed to retard the plasma discharge during anodization and, hence, decreased the film thickness of Ca-containing alloys. The highest apatite forming ability in 1.5xSBF was observed for AM60-1Ca specimens (both substrate and anodized) that exhibited more degradation than the other two alloys as indicated by surface observation. The increase of surface roughness and the degree of supersaturation of 1.5xSBF due to dissolution of Mg ions from the substrate surface or the release of film compounds from the anodized surface are important factors to enhance deposition of Ca-P compound on the specimen surfaces.

• Journal of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.516-521
• /
• 1985

Ethylenediamine-triacetatocobalt (III) complexes with an ammine, an ethylene-diamine, and a trimethylenediamine as the unidentate ligand were prepared, and were isolated as only one isomer for each case by the Dowex 50W-X8, cation exchange resin in $H^+$ form. The geometrical isomer of these complexes have been assigned cis-equatorial form in the three possible geometrical isomers from the elemental analysis, pH titration, IR, NMR, and electronic absorption spectrum. It was found that $[CoN_3O_3]$ system of the meridional form with multidentate ligand have the first absorption band of the largely splitting pattern, and that the diamines (ethylenediamine, trimethylenediamine) have coordinated to the central cobalt (III) ion as a unidentate ligand.

• Journal of the Korean Chemical Society
• /
• v.46 no.3
• /
• pp.194-204
• /
• 2002

Aseries of novel salen-type complexes {[Mn(III)($L_{acn}$)CI]: n=1~11} containing CI- ion were obtained by reactions of the Mn(CH$_3$COO)$_2$· 4H$_2$O with the potentially tetradentate compartmental ligand {$H$_2$L_{acn}$} prepared by condensation the of one mole of diamine {ethylenediamine, 1,3-propnediamine, o-phenylenediamine and 2,2-dimethyl-1,3-propanediamine} with two moles of aldehyde {alicylaldehyde, 5-chloro-salicylaldehyde, 3,5-dichlorosalicylaldethyde, and 3,5-di-tert-butyl-2-hydroxy-benzaldehyde} in a methanol solution. The resulting salen-type lignds and their Mn(III) complexes were identified and characterized by elemental analysis, conductivity, themogravimetry and UV-VIS, IR and NMR spectroscopy.

• Microbiology and Biotechnology Letters
• /
• v.18 no.5
• /
• pp.496-500
• /
• 1990

When pepsin was used at a concentration of 8 mglml for hydrolysis of 0.02% casein, inhibitory activity of this inhibitor was proportional to a inhibitor concentration of 20 ${\mu}g$/ml, and fifty percent inhibition ($IC_{50}$) was observed to be 15 ${\mu}g$/ml. The inhibitor was pH-stable at pH range of 5-9 at $100^{\circ}C$ for 10 minutes and thermo-stable at pH 7.0 at $100^{\circ}C$ to give 100% activity for 20 minutes. The formation of pepsin-inhibitor complex was confirmed by sephadex 6-25 gel filtration and type of inhibition was determined as non-competitive inhibition by Lineweaver-Burk plot. The inhibitor strongly inhibited acid proteases such as pepsin and renin, and it was soluble in methanol very well. On TLC analysis of silicagel 60 using various sohent systems, the inhibitor gave a single spot at Rf range 0.4-0.6. From the result of IR spectrum and color reaction (Rydon-Smith, Biuret), this inhibitor was considered as peptide substance. Melting point and elemental contents were 220-$230^{\circ}C$, and C 50.61%-H 8.02%-N 9.34% (found), respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.6
• /
• pp.246-252
• /
• 2011

The semiconducting $MnSi_{1.73}$ compound has been recognized as a thermoelectric material with excellent oxidation resistance and stable characteristics at elevated temperature. In the present work, we applied mechanical alloying (MA) technique to produce $MnSi_{1.73}$ compound using a mixture of elemental manganese and silicon powders. The mechanical alloying was carried out using a Fritsch P-5 planetary mill under Ar gas atmosphere. The MA powders were characterized by the X-ray diffraction with Cu-$K{\alpha}$ radiation, thermal analysis and scanning electron microscopy. Due to the observed larger loss of Si relative to Mn during mechanical alloying of $MnSi_{1.73}$, the starting composition of a mixture Mn-Si was modified to $MnSi_{1.83}$ and then $MnSi_{1.88}$. The single $MnSi_{1.73}$ phase has been obtained by mechanical alloying of $MnSi_{1.88}$ mixture powders for 200 hours. It is also found that the grain size of $MnSi_{1.73}$ compound powders analyzed by Hall plot method is reduced to 40 nm after 200 hours of milling.

• Magazine of the Korea Concrete Institute
• /
• v.7 no.2
• /
• pp.175-182
• /
• 1995

Styrene-Maleic anhydride copolymer (SMA) was prepared by the radical copolmerization of styrene and maleic anhydride using ${\alpha}-{\alpha}'$ azobis(isobutyronitrile) as an initiatrr. SMA was further reacted with m-amino phenol to obtain aminophenol-substituted SMR (mSMA). Sulfonated SMA and mSMA were also prepared by the reaction of copolymers with sulfuric acid The copolyniers were characterized by infrared spectroscopy. It was found from the results of elemental analysis that the substitution degree of aminophenol in the mSMR is 44% and the degree is lowered to 35% after sulfonation. The percentage of copolymers adsorbed on the surface of cement particles was increased with a decrease of added copolymers. While, the arnourit of sulfonated SMA absorbed on the surface of cement particles was larger than that of the sulfonated mSMA The copolymers synthesized in this study are probably expected as a high range water reducer for coiicxte.

• Carbon letters
• /
• v.19
• /
• pp.72-78
• /
• 2016

Spinnable pitches and carbon fibers were successfully prepared from petroleum or coal pyrolysis residues. After pyrolysis fuel oil (PFO), slurry oil, and coal tar were simply filtered to eliminate the solid impurities, the characteristics of the raw materials were evaluated by elemental analysis, ¹³C nuclear magnetic resonance spectrometer, matrix-assisted laser desorption/ionization time-of-flight mass spectrometer (MALDI-TOF-MS), and so on. Spinnable pitches were prepared for melt-spinning carbon fiber through a simple distillation under strong nitrogen flow, and further vacuum distillation to obtain a high softening point. Carbon fibers were produced from the above pitches by single-hole melt spinning and additional heat treatment, for oxidization and carbonization. Even though spinnable pitches and carbon fibers were processed under the same conditions, the melt-spinning and properties of the carbon fiber were different depending on the raw materials. A fine carbon fiber could not be prepared from slurry oil, and the different diameter carbon fibers were produced from the PFO and coal tar pitch. These results seem to be closely correlated with the initial characteristics of the raw materials, under this simple processing condition.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.66-70
• /
• 1998

Several liquid crystalline monomers were synthesized and characterized to utilize as new matrix materials of liquid crystal/polymer composite films for display application. Liquid crystalline compounds which have azo group as center link, cyano group at one of the terminal position in common and bromoalkyl(azo(n)), azidoalkyl(AZI(n)), aminoalkyl(ALC(n)) as the terminal group were synthesized and identified respectively by FT-lR, $^1H-NMR$ spectrometer and elemental analysis. All these compounds exhibited nematic liquid crystalline region in the certain temperature range as determined by DSC and polarized optical microscope. These liquid crystalline compounds also showed a typical even-odd effect in both $T_{KN}$ and $T_{NI}$ due to conformational change as the length of terminal alkyl chain, $-(CH_2)n-$. was varied.

• Analytical Science and Technology
• /
• v.10 no.4
• /
• pp.246-255
• /
• 1997

A series of Ni(II) complexes with multidentate N, O-Schiff base ligands: ie [bis-(salicylaldehyde) ethylenediamine(SED), bis-(salicylaldehyde) propylenediamine(SPD), bis-(salicylaldehyde) dietrylenetriamine(SDT), and bis-(salicylaldehyde) triethylenetetraamine(STT)] and Ni(II) complexes were synthesized. The Ni(II) complexes were characterized by elemental analysis, IR, UV-Vis and mass spectrometry. The stability constants of each nickel (II) complexes were determined by potentiometry in 70% dioxane-30% $H_2O$ and ethanol. The stability constants of Nickel(II) complexs increased in the order of Ni(II)-SPD

• Biomolecules & Therapeutics
• /
• v.5 no.2
• /
• pp.125-132
• /
• 1997

Cisplatin, a platinum-complex, is currently one of the most effective compounds used in the treat-ment of solid tumors. However, its use is limited by severe side effects such as renal toxicity. Our platinum-based drug discovery program is aimed at developing drugs capable of diminishing toxicity and improving selective cytotoxicity. We synthesized new Pt (II) complex analogue containing 1,2-diaminocyclohexane (DACH) as carrier ligand and 1,2-bis (diphenylphosphino) ethane (DPPE) as a leaving group. Furthermore, nitrate was added to improve the solubility. A new series of [Pt(cia-DACH)(DPPE)] . $2NO_3$ (PC) was synthes-ized and characterized by their elemental analysis and by various spectroscopic techniques [infrared (IR), $_{13}$carbon nuclear magnetic resonance (NMR)] .PC demonstrated acceptable and significant antitumor activity against SKOV-3 and OVCAR-3 human ovarian carcinoma cell lines as compared with that of cisplatin. The cytotoxicity of PC in normal cells was found quite less than that of cisplatin using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT), ($^3$H)thymidine uptake and glucose consumption tests in rabbit renal proximal tubular cells, human renal cortical cells and tissues. In conclusion, PC is considered to be more selective cytotoxicity toward human ovarian cancer cells than normal human/rabbit kidney cells.