• 한국기계가공학회지
• /
• 제19권1호
• /
• pp.43-48
• /
• 2020

At present, 24 nuclear power plants are in operation nationwide as the main power source responsible for about 27% of Korea's electricity, and five nuclear power plants are currently under construction. Issues of nuclear safety and reliability have always existed, but after the Fukushima accident, ensuring reliability has become an even more important issue for safety. Compared to other kinds of accidents, the initial response after a nuclear accident is more important than any other accident. Prior to accidents, it is important to be able to predict and judge the accident in advance for the sake of prevention. In this research, non-destructive inspection methods for existing pipe welds include radiographic, ultrasonic, magnetic particle practice, and liquid penetration testing. For this experiment, carbon steel pipes like that of the material used in nuclear pipes were adopted, and specimen welded to the flange (Flange) were manufactured. After testing, the weld specimen were not damaged through the infrared thermography (IRT) experiment. This study attempted to improve the safety of carbon steel pipes through a comparative analysis of finite element analysis.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.416-419
• /
• 2003

셀룰러 신경회로망(CNN)은 일반적인 신경회로망과는 다른 형태의 회로구조를 가진다. 이것은 간단한 처리요소인 셀들의 배열로 이루어져 있으며, 각 셀들은 국부적인 연결특성과 공간불변 템플릿 특성을 갖는다. 본 논문에서는 소규모의 CNN셀 블록을 사용하여 대규모의 입력영상을 블록으로 처리하는 실용적인 시다중화 영상처리 기법을 적용하였다. 그리고, C프로그램과 Matlab모델로 구현된 시뮬레이터를 사용하여 윤곽선 검출 시뮬레이션을 하였다. 또한 5$\times$5 CNN 하드웨어와 전ㆍ후 처리기를 설계하여 시험중에 있다.

• 한국콘텐츠학회논문지
• /
• 제5권2호
• /
• pp.213-219
• /
• 2005

소프트웨어를 개발할 때 작성되는 명세서들은 개별특성으로 인해 연속적인 자동화가 이루어지지 않으며, 소프트웨어 감리에서도 많은 불일치 항목이 발견된다. 본 논문에서는 분석 및 설계단계에서 작성되는 명세서간 일관성 유지를 위하여 감리관련자료를 분석하여 불일치 항목 분류기준을 설정한다. 이를 기초로 명세서 불일치 항목 추출 방법을 제안한다. 이를 이용하면, 분석 및 설계단계에서 작성되는 명세서의 오류를 줄임으로써 최종산출물인 소프트웨어에 대한 품질을 향상시킬 수 있다.

• 분석과학
• /
• 제8권3호
• /
• pp.371-374
• /
• 1995

유기게르마늄 화합물인 Ge-132의 분석법을 확립하였다. 이온교환수지 컬럼을 사용하고 $Na_2B_4O_7$ buffer를 이동상으로 하여 Ge-132를 분리한 다음, 전기전도도 검출기를 사용하여 검출하는 방법을 이용한 결과 50pmol의 농도까지 분석할 수 있었다. 이 방법은 Ge-132의 원료와 제품의 품질 관리에 응용이 가능하였다.

• Nuclear Engineering and Technology
• /
• 제30권5호
• /
• pp.452-461
• /
• 1998

The pin power distribution is determined by analyzing the rotational gamma scanning data for 36 element fuel bundle of HANARO. A fission monitor of Nb$^{95}$ is chosen by considering the criteria of the half-life, fission yield, emitting ${\gamma}$-ray energy and probability. The ${\gamma}$-ray spectra were measured in Korea Atomic Energy Research Institute(KAERI) by using a HPGe detector and by rotating the fuel bundle at steps of 10$^{\circ}$. The counting rates of Nb$^{95}$ 766 keV ${\gamma}$-rays are determined by analyzing the full absorption peak in the spectra. A 36$\times$36 response matrix is obtained from calculating the contribution of each rod at every scanning angle by assuming 2-dimensional and parallel beam approximations for the measuring geometry. In terms of the measured counting rates and the calculated response matrix, an inverse problem is set up for the unknown distribution of activity concentrations of pins. To select a suitable solving method, the performances of three direct methods and the iterative least-square method are tested by solving simulation examples. The final solution is obtained by using the iterative least-square method that shows a good stability. The influences of detection error, step size of rotation and the collimator width are discussed on the accuracy of the numerical solution. Hence an improvement in the accuracy of the solution is proposed by reducing the collimator width of the scanning arrangement.

• 한국전산구조공학회논문집
• /
• 제25권1호
• /
• pp.109-116
• /
• 2012

새로운 형태의 교량 거더인 CFTA(Concrete filled and tied tubular steel arch) 거더의 비선형 거동에 대해 고찰한 후, CFTA 거더의 대량 공장 생산시 콘크리트 충진 불량으로 발생할 수 있는 결함인 거더 안의 빈 공간을 탐지하는 새로운 방법을 제안하였다. CFTA 거더 안의 비대칭성 콘크리트 충진 불량 결함을 구조물의 대칭 거동을 이용하여 탐색하였으며, 수치해석과 실험을 통해 제안된 방법을 검증하였다. 제안된 방법을 수치적으로 검증하기 위해 3차원 유한요소모델을 사용하였으며, 실험적으로 검증하기 위해 CFTA거더의 정적 실험자료를 사용하였다.

• Journal of Magnetics
• /
• 제21권1호
• /
• pp.57-60
• /
• 2016

Non Destructive Testing (NDT) methods that are capable of detecting the wall thinning and defects through insulation and cladding sheets are necessary. In this study we developed a Pulsed Eddy Current (PEC) system to detect wall thinning of ferro magnetic steel pipes covered with 95 mm thick fiber glass thermal insulator and shielded with aluminum plate of thickness 0.4 mm. In order to confirm the thickness change due to wall thinning, two different sensors, a hall sensor and a search coil sensor were used as a detecting element. In both the cases, the experimental data indicates a considerable change in the detected pulse corresponding to the change in sample thickness. The thickness of the tube was made to change such as 2.5 mm, 5 mm and 8 mm from the inner surface to simulate wall thinning. Fast Fourier Transform (FFT) was calculated using window approach and the results were summarized which shows a clear identification of thickness change in the test specimen by comparing the magnitude spectra.

• 디지털산업정보학회논문지
• /
• 제10권1호
• /
• pp.105-112
• /
• 2014

The utilization of Wireless Ad Hoc Network which can build easily network using wireless device in difficult situation to build network is very good. However, it has security threat element because it transfers data by only forwarding of wireless devices. The measures against this should be prepared because damage by especially routing attack can affect the entire network. It is hard to distinguish malicious node and normal node among nodes composing network and it is not easy also to detect routing attack and respond to this. In this paper, we propose new method which detect routing attack and can respond to this. The amount of traffic in all nodes is measured periodically to judge the presence or absence of attack node on the path set. The technique that hides inspection packet to suspected node and transmits is used in order to detect accurately attack node in the path occurred attack. The experiment is performed by comparing SRAODA and SEAODV technique to evaluate performance of the proposed technique and the excellent performance can be confirmed.

• 한국유체기계학회 논문집
• /
• 제20권1호
• /
• pp.59-64
• /
• 2017

Diverter is an essential element in gravimetric calibration method of flowmeter. Error of diverter are influenced by flow velocity profile of nozzle outlet, motion velocity of diverter and detecting location. That's why, time detection position of diverter is tuned through repetitive test for minimizing error of diverter. Further the diverter must be compared with the other institutions test since the influence on the accuracy of the flow meter used in the test. In this paper, errors (flow velocity profile of nozzle outlet, motion velocity of diverter and detecting location) of diverter are decreased by produced uni-direction diverter and error of gravimetric calibration system is decreased. Uni-direction diverter is calibrated by gravimetric calibration system with precision flowmeter, the flowmeter is calibrated by pipe prover and other institutions and uni-direction diverter is evaluated. Uni-direction diverter is not influenced by flow velocity profile of nozzle outlet, motion velocity of diverter and detecting location. As a result, Uni-direction diverter can calibrate in wider scope since increasing ratio of maximum and minimum flow rate of uni-direction diverter.

• 한국안전학회지
• /
• 제29권3호
• /
• pp.20-27
• /
• 2014

Cooling equipment is the frequent occurrence of fire despite the absence of the heating element. National fire statistics in 2013 show that a total of 263 fires occurred in the cooling equipment and the number of electric fan has 145 fire cases. This is accounted for 55.1% of the whole. Electric fan is the electrical appliance that the heat is generated on the winding wire and the iron core. If such characteristic is not controled properly, fire would break out at the electric fan. also there is a gap filled with an insulator between connection terminals of the capacitor in the electric fan. But in case that the gap on the capacitor is covered with some conductive material such as dust, there would be a fire as well caused by electrical heating locally. Although many studies related with those have been conducted, electric fan fire is continuously occurred. In this study, thermal characteristics and current signal in various conditions such as the heat generation of windings including iron cores of the motor and the dielectric breakdown of terminals on the capacitor connected to the motor were detected. In order to measure the maximum temperature, "third level" wind velocity button was pushed and the time selection switch to "continuation" was set. Analyzed data would be available for the fire safety of the electric fan.