• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.5
• /
• pp.506-517
• /
• 2012

Electronic Toll Collection System (ETCS), so called "Hi-Pass" in Korea, has improved traffic flow at toll gate of highways. It is known that the improvement of traffic flow should reduce air pollutants and $CO_2$ from vehicles. In this study, real driving emission of a light duty truck with Portable Emission Measurement System(PEMS) has been measured to evaluate the emission reduction effect due to ETCS. The correlations between driving variables and emissions have been analyzed to verify its effect on traffic flow improvement and emission reduction at toll gate. We considered average vehicle speed, Relative Positive Acceleration (RPA), and the distance of queue as driving variables. Compared to passing Manual Toll Collection System (MTCS) lane without queue, ETCS was able to reduce 38.7% of $NO_x$, 21.6% of soot, and 27.7% of $CO_2$. The results showed that the higher the average vehicle speed, the lower RPA and no queue in ETCS contributed to the emission reductions. Linear equation models with RPA and queue have been established by the multiple linear regression method. The linear models resulted in the higher coefficient of determination than those with only average vehicle speed used for establishing vehicle emission factors.

• Journal of Korea Multimedia Society
• /
• v.7 no.1
• /
• pp.35-43
• /
• 2004

In this paper, we proposed a vehicle recognition and electronic toll collection system with detection and classification of vehicle identification mark and emblem as well as recognition of vehicle license plate to unman toll fee collection system or incoming/outcoming vehicles to an institution. In the proposed algorithm, we first process pre-processing step such as noise reduction and thinning from the rear side input image of vehicle and detect vehicle mark, emblem and license plate region using intensity variation informations, template masking and labeling operation. And then, we classify the detected vehicle features regions into vehicle mark and emblem as well as recognize characters and numbers of vehicle license plate using hybrid and seven segment pattern vector. To show the efficiency of the proposed algorithm, we tested it on real vehicle images of implemented vehicle recognition system in highway toll gate and found that the proposed method shows good feature detection/classification performance regardless of irregular environment conditions as well as noise, size, and location of vehicles. And also, the proposed algorithm may be utilized for catching criminal vehicles, unmanned toll collection system, and unmanned checking incoming/outcoming vehicles to an institution.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05b
• /
• pp.767-770
• /
• 2003

현재 사용되고 있는 ETCS(Electronic Toll Collection Services)는 충전식의 스마트 카드와 카드리더를 이용하여 필요한 정보를 읽음으로 인증 및 과금 결제를 처리하는 방식이다. 혀 방식은 스마트 카드 규격이 다양하여 사용자는 각 규격에 맞는 카드리더를 사용해야 한다. 게다가 충전식이기 때문에 매번 충전해야하는 불편함이 있다. 본 논문에서는 현 ETC(Electronic Toll Collection)시스템의 단점을 극복하고자 스마트 카드 대신 휴대폰과 WAP(Wireless Application Protocol) 서버를 사용하여 통행료 자동징수 시스템을 설계한다. 또한 휴대폰을 사용함으로써 ITS(Intelligent Transfer Service) 시스템과 별도로 지역적인 인증이 가능하여 인중절차를 간소화시킬 수 있으며, ITS 시스템의 부하를 줄일 수 있기 때문에 ETC시스템 처리속도 또한 증가시킬 수 있다.

• Journal of Advanced Navigation Technology
• /
• v.11 no.3
• /
• pp.337-342
• /
• 2007

This paper proposes Electronic Credit Card(EMV) processing procedures for a credit payment method which can be applied to Korean ETCS(Electrical Toll Collection System). In Korea, Korea Highway Corporation services contactless ETCS's called by Hi-Pass and Touch-Pass system at present. These systems operate on a pre-paid payment method similar to electronic money. On the other side, a credit payment method based on credit card has an advantage which does not require pre-paid. The introduction of credit payment method to ETCS is in preparation. In this paper, we propose EMV processing methods based on a credit payment method which can be applied on ETCS.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.3
• /
• pp.87-92
• /
• 2013

This study is to analyze the impacts of different High-Pass lane speed limits. Paramics, microscopic simulation software, was used to perform microscopic simulations. For the simulations, Incheon toll gate traffic count data was used. The Paramics simulation results show that higher High-Pass speed limit (70Km/h) produced better traffic flow condition and less air pollution cost compared to existing High-Pass speed limit (30Km/h).

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.723-726
• /
• 2002

This paper describes the design, fabrication, and measurement of a sequential-rotation microstrip-array antenna for the Electronic Toll Collection System (ETCS). The ETCS is made possible by using roadside equipment with radiation pattern that can accurately pinpoint the designated communication area, without interference from other lanes. The sequential-rotation microstrip-array antenna was applied to the absorber to reduce the side lobe level (SLL). Results showed that the antenna yields a return loss at a center frequency of -20.675 dB, an axial ratio of 1.15 dB, and a gain of 20.26 dBi.

• International Journal of Highway Engineering
• /
• v.9 no.1 s.31
• /
• pp.17-27
• /
• 2007

Since early 1990s, several developed countries have applied the Electronic Toll Collection System (ETCS) to toll roads in order to solve traffic congestion and delay problems at toll plazas. For the successful operation of the ETCS, it is important to correctly forecast the ETCS using rate. In this study, it was conceived to develop a sophisticated demand forecasting model of the ETCS for toll roads in Changwon City The Binary Logit and neural network models were tested for the model considering 11 explaining variables. The best results in prediction accuracy and goodness-of-fit were obtained on the neural network model. However, because of the difficulty in predicting the 11 variables and its fitness in wide range, the Binary Logit model which considers three policy variables only is recommended as the model to forecast the ETCS using rate.

• 한국ITS학회:학술대회논문집
• /
• 2003.11a
• /
• pp.262-268
• /
• 2003

• 한국ITS학회:학술대회논문집
• /
• 2002.11a
• /
• pp.100-103
• /
• 2002

• 한국ITS학회:학술대회논문집
• /
• 2002.11a
• /
• pp.108-111
• /
• 2002