• 무역상무연구
• /
• 제19권
• /
• pp.119-138
• /
• 2003

ICC(International Chamber of Commerce) developed new rule on the presentation of electronic record in L/C transactions. This rule named as the e-UCP. The gists of this article are on the application of e-UCP in practice and it's some problems. The e-UCP is the supplement of current exisiting UCP but is superior to UCP under some circumstances. The e-UCP is only apply to the presentation of electronic record regardless of type of L/C(for example, traditional paper L/C or electronic L/C). The presentation of electronic record has some problems which has not seen in the presentation of paper document. These peblems are Time, Place of presentation, and format of electronic record and so on. The e-UCP provided on the basis of these problems. However, the e-UCP has some obscure provisions on the examination of electronic record and the corruption of electronic record. Who is responsible for the corruption of electronic record by the virus on the system of bank ? The current e-UCP is not clear on this matter. We have to note followings in case of presenting the documents electronically and applying the e-UCP. First, Beneficiary has additional duty to notice of completion of presentation. Second, It will be increasing the clean NEGO through prompt feedback of the descrepancy at the presenting time. Third, It is no use of L/G(Letter of Guarantee).

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.535-538
• /
• 2005

We report the influence of the threshold voltage and mobility fluctuation in TFT on current mode digital circuit performance. We found that the threshold voltage showed more serious circuit malfunction. We studied new circuit configuration for improvement.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.388-389
• /
• 2006

Electro-deposition of carbon film on silicon substrate in methanol solution was carried out with various current density, solution temperature and electrode spacing between anode and cathode. The carbon films with smooth surface morphology and high electrical resistance were formed when the distance between electrode was relatively wider. The electrical resistance of the carbon films were independent of both current density and solution temperature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.405-407
• /
• 1987

We calculated the discharge resistance, which is determined by plasma dynamics, of the discharge pumped excimer lasers with charge-transfer type. And investigated the characteristic of discharge voltage and current using EMIP.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.1866-1868
• /
• 1998

This paper propose zero voltage and zero current switching buck converter using a single switch. This converter is electrically equivalent to two basic buck converter in a cascade. Proposed converter is switching at high frequency and operate in high efficiency at wide load range due to resonant switching.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.283-284
• /
• 2008

The magnetic flux is generated by a vortex current which circulates around the vortex with a sense of rotation opposite to that of the diamagnetic screening surface current. When the external magnetic field was applied to the superconductor magnetometer, some regions of the magnetic sensor will be destroyed, especially the weak link regions and the defect regions. The destroyed regions will be increased with the increasing of the magnetic flux.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.132-135
• /
• 2000

This paper present the results of measured Thermally Stimulated Current of EPR(Ethylene Propylene Rubber) sheet material with variation of bias temperature range of -35~80[$^{\circ}C$], the quality of the material of electrode, condition. The origins of these peaks are that, low temperature peak seems to result from dipole, and high temperature peak from the orientation electronic trap.

• Transactions on Electrical and Electronic Materials
• /
• 제16권5호
• /
• pp.241-249
• /
• 2015

Phase-locked-loops (PLL) have been employed in high-speed data transmission systems like wireless transceivers, disk read/write channels and high-speed interfaces. The majority of the researchers use a charge pump (CP) to obtain high performance from PLLs. This paper presents a review of various CMOS CP schemes that have been implemented for PLLs and the relationship between the CP parameters with PLL performance. The CP architecture is evaluated by its current matching, charge sharing, voltage output range, linearity and power consumption characteristics. This review shows that the CP has significant impact on the quality performance of CP PLLs.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.456-459
• /
• 2004

Generally, instrument transformer of the core type have been used for measuring current. Because instrument transformer has defects, electronic instrument was appeared. Electronic instrument has many merit-linearity, small size, low cost, etc. Rogowski coil is typical electronic CT and R-divider is typical electronic VT. This paper is introduced a basic concept and theory of electronic current transformer, electronic voltage transformer.

• Transactions on Electrical and Electronic Materials
• /
• 제15권1호
• /
• pp.1-6
• /
• 2014

Self-exciting electronic ballast, of small size, and low cost, and high power, with no stroboscopic effect, no noise, is widely used in the general lighting market. This paper describes the cause of high switching loss of self-exciting electronic ballast, based on its operational principle; then, to reduce the switch temperature and increase the reliability of the product, the drive circuit has been improved, to achieve soft-switching. The theory analysis, simulation and experimental result prove the feasibility and compatibility of this new method in practice. Finally, the design procedure and winding method of the self-exciting current transformer are introduced.