• 한국전기전자재료학회논문지
• /
• 제23권11호
• /
• pp.831-836
• /
• 2010

In this paper, Plasma Enhanced Chemical Vapor Deposition (PECVD) $SiO_2$ film properties are modeled using statistical analysis and neural networks. For systemic analysis, Box-Behnken's 3 factor design of experiments (DOE) with response surface method are used. For characterization, deposited film thickness and film stress are considered as film properties and three process input factors including plasma RF power, flow rate of $N_2O$ gas, and flow rate of 5% $SiH_4$ gas contained at $N_2$ gas are considered for modeling. For film thickness characterization, regression based model showed only 0.71% of root mean squared (RMS) error. Also, for film stress model case, both regression model and neural prediction model showed acceptable RMS error. For sensitivity analysis, compare to conventional fixed mid point based analysis, proposed sensitivity analysis for entire range of interest support more process information to optimize process recipes to satisfy specific film characteristic requirements.

• 한국전자통신학회논문지
• /
• 제10권8호
• /
• pp.927-934
• /
• 2015

본 논문에서는 산업현장에서 자연현상에 의하여 발생하는 임펄스성 서지(surge)에 의한 PoE(Power Over Ethernet)시스템의 통신 장애를 예방하기 위하여 이중화된 임펄스성 서지 보호회로를 설계하여 PoE 통신설비의 임펄스성 서지의 대책 방안을 제안하였다. PoE에 따른 임펄스성 서지신호의 특성을 분석하기 위하여 국제표준 IEC 61000-4-5에 적합한 서지 발생장치를 개발하였으며 서지 발생장치를 PoE 데이터 전송 라인에 인가하여 설계 제작한 이중화된 PoE 전원공급 보호회로에 의하여 순차적으로 임펄스성 서지 신호가 약화됨을 확인하였다.

• 한국전자통신학회논문지
• /
• 제6권4호
• /
• pp.499-504
• /
• 2011

본 논문은 컴퓨터 등 정보기기에 입력되는 문자나 기호의 부호화 규칙을 제시하였다. 문자나 부호를 부호화할 때 본 논문에서 제시하는 규칙을 적용할 경우, 데이터를 전송로에 전송할 때 회선부호화과정에서 발생하는 스크램블링의 발생으로 인한 전송효율이 떨어지는 것을 감소시킬 수 있다. 본 논문에서는 3비트열 ${\times}$ 4비트행의 1바이트 부호화에 대한 것을 고찰하였다. 이를 위해 대표적인 3비트 열 ${\times}$ 4비트 행의 1바이트 부호체계인 ASCII 부호체계를 적용하였다.

• 한국전기전자재료학회논문지
• /
• 제25권3호
• /
• pp.176-181
• /
• 2012

Due to the high etch rate and low fabrication cost, the wet etching of silicon using KOH etchant is widely used in MEMS fabrication area. However, anisotropic etch characteristic obstruct intuitional mask design and compensation structures are required for mask design level. Therefore, the accurate modeling for various types of silicon surface is essential for fabrication of three-dimensional MEMS structure. In this paper, we modeled KOH etch profile for MEMS based energy harvester using fuzzy logic. Modeling results are compared with experimental results and it is applied to design of compensation structure for MEMS based energy harvester. Through Fuzzy inference approaches, developed model showed good agreement with the experimental results with limited etch rate information.

• Transactions on Electrical and Electronic Materials
• /
• 제9권4호
• /
• pp.169-172
• /
• 2008

We attempted to fabricate carbon nanotube field effect transistor (CNT-FET) using single walled carbon nanotube(SWNT) on the heavily doped Si substrate used as a bottom gate, source and drain electrode were fabricated bye-beam lithography on the 500 nm thick $SiO_2$ gate dielectric layer. We investigated electrical and physical properties of this CNT-FET using Scanning Probe Microscope(SPM) and conventional method based on tungsten probe tip technique. The gate length of CNT-FET was 600 nm and the diameter of identified SWNT was about 4 nm. We could observed gating effect and typical p-MOS property from the obtained $V_G-I_{DS}$ curve. The threshold voltage of CNT-FET is about -4.6V and transconductance is 47 nS. In the physical aspect, we could identified SWNT with phase mode of SPM which detecting phase shift by force gradient between cantilever tip and sample surface.

• 한국전자통신학회논문지
• /
• 제9권12호
• /
• pp.1359-1364
• /
• 2014

IEEE 802.11p는 차량통신 시스템의 대표적인 물리계층 및 매체접근제어계층 표준이다. IEEE 802.11p를 기반으로 한 통신시스템의 일대일 통신성능은 링크접속시간, 오류율, 전송용량 (throughput), 등의 다양한 형태로 측정되었다. 본 논문에서는 IEEE 802.11p기반 통신시스템을 이용하여 대용량으로 신호 전송 시 성능을 측정한다. 일대일 통신을 포함하여 최대 32개의 통신시스템을 사용하여 데이터를 전송하였을 경우에 대한 성능을 측정한다. 전송방식은 브로드캐스트와 유니캐스트 두 가지 경우에 대해 고려하며, 통신시스템의 성능은 수신율 및 전송용량을 이용하여 나타낸다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권6호
• /
• pp.1996-2013
• /
• 2015

This paper considers a scenario that more D2D users exist in the cell, they compete for cellular resources to increase their own data rates, which may cause transmission interference to cellular users (CU) and the unfairness of resource allocation. We design a resource allocation scheme for selfish D2D users assisted by cooperative relay technique which is used to further enhance the users' transmission rates, meanwhile guarantee the QoS requirement of the CUs. Two transmission modes are considered for D2D users: direct transmission mode and cooperative relay transmission mode, both of which reuses the cellular uplink frequency resources. To ensure the fairness of resource distribution, Nash bargaining theory is used to determine the transmission mode and solve the bandwidth allocation problem for D2D users choosing cooperative relay transmission mode, and coalition formation game theory is used to solve the uplink frequency sharing problem between D2D users and CUs through a new defined "Selfish order". Through theoretical analysis, we obtain the closed Nash bargaining solution under CUs' rate constraints, and prove the stability of the formatted coalition. Simulation results show that the proposed resource allocation approach achieves better performance on resource allocation fairness, with only little sacrifice on the system sum rates.

• 한국전자통신학회논문지
• /
• 제7권6호
• /
• pp.1449-1454
• /
• 2012

수신 신호 세기 (RSSI: Received signal strength indicator)는 아날로그-디지털 변환기 입력단에서 수신신호의 세기를 나타낸다. 통신시스템에서 수신 신호 세기는 수신단에서 채널의 상태를 결정하는데 사용된다. 본 논문에서는 핸드오버상에서 실측값을 바탕으로 한 수신 신호 세기의 이용에 대해 알아본다. 먼저 WAVE (Wireless Access in Vehicular Environments)라 일컫어지는 차량통신을 위한 5.9GHz 주파수대에서 RSSI값을 측정한다. 측정된 데이터를 바탕으로 하여 빠른 핸드오버 방식 적용을 위한 수신 신호 세기의 이용에 대해 논의하고, 실제 고속도로 환경에서 RSSI를 이용하여 핸드오버를 적용한다.

• Journal of Communications and Networks
• /
• 제13권1호
• /
• pp.70-76
• /
• 2011

This paper presents the unified user equipment (UE) baseband modulation and demodulation (modem) hardware platform architecture to support multiple radio access technologies. In particular, this platform selectively supports two systems; one is HEDGE system, which is the combination of third generation partnership project (3GPP) Release 7 high speed packet access evolution (HSPA+) and global system for mobile communication (GSM)/general packet radio service (GPRS)/enhanced data rates for GSM evolution (EDGE), while the other is LEDGE system, which is the combination of 3GPP Release 8 long term evolution (LTE) and GSM/GPRS/EDGE. This is done by applying the flexible pin multiplexing scheme to a hardwired pin mapping process. On the other hand, to provide stable connection, high portability, and high debugging ability, the stacking structure is employed. Here, a layered board architecture grouped by functional classifications is applied instead of the conventional one flatten board. Based on this proposed configuration, we provide a framework for the verification step in wireless cellular communications. Also, modem function/scenario test and inter-operability test with various base station equipments are verified by system requirements and scenarios.

• 한국전기전자재료학회논문지
• /
• 제11권8호
• /
• pp.637-645
• /
• 1998

The characteristics of waveguide, electrode and packaging fabricated for acousto-optic tunable filters(AOTF) used for optical communications were analyzed. A $Ti:LiNbO_3$in-diffusing method was employed for the formation of the optical waveguide with a dimension of width $8{\mu}m$, length $30000-50000{\mu}m$ and varying the thickness. The diffusion was carried at $1050^{\circ}C$ for 8 hours to pattern the optical waveguide. The resulted waveguide exhibited a single mode at 1550nm optical wavelength. The width of IDT, with 10 SAM periods, was $5000{\mu}m$ . Impedances of the electrodes deposited with Au were analyzed using a network analyzer; $48.1\Omega$ at the center frequency of 193MHz for electrode thickness of $1500{\AA}$ and $50.7\Omega$ at the center frequency of 192MHz for $1600\AA$. And the characteristics of packaged AOTF was analyzed. When the electrical frequency 177.1MHz was applied to the device, the mode conversion efficiency was measured as 63% at the optical wavelength 1515nm.