• Carbon letters
• /
• v.15 no.1
• /
• pp.57-66
• /
• 2014

Three activated carbons (ACs) were prepared using NaOH (N) as an activating agent. Hydrofluoric acid pre-leached rice husk was used as a precursor. After leaching, the precursor was washed with distilled water, dried, crushed, and then sieved; a size fraction of 0.3-0.5 mm was selected for carbonization in the absence of air at $600^{\circ}C$. The carbonization product (LC) was mixed with NaOH at ratios of 1:2, 1:3, and 1:4 (wt of LC: wt of NaOH) and the produced ACs after activation at $800^{\circ}C$ were designated NLC21, NLC31, and NLC41, respectively. Surface and textural properties were determined using nitrogen adsorption at $-196^{\circ}C$, scanning electron microscopy images, thermogravimetric analysis, and Fourier transform infrared spectra. These ACs were used as adsorbents for lead(II) from aqueous solutions. The effects of the textural properties and the chemistry of the carbon surfaces were investigated and the impact of the operation conditions on the capacity for lead(II) sorption was also considered. Modification of NLC41 with $H_2O_2$ and $HNO_3$ gave two other adsorbents, $H_{NLC41}$ and $N_{NLC41}$ respectively. These two new samples exhibited the highest removal capacities for lead(II), i.e.117.5 and 128.2 mg/g, respectively. The adsorption data fitted the Langmuir isotherm and the kinetic adsorption followed pseudo-second order kinetics. The thermodynamic parameters have been determined and they indicated a spontaneous endothermic process.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.76-82
• /
• 2014

1-Methylimidazole-2-thiol, as a kind of mercaptans, is a typical organic pollutant which has not been efficiently removed. In this study, titanium dioxide ($TiO_2$) photocatalyst based on magnetic multi-walled carbon nanotubes (MWCNTs) was synthesized via hydrothermal and sol-gel methods. The as-prepared photocatalyst was extensively characterized by X-ray diffraction (XRD), X-ray energy diffraction spectrum (EDS), transmission electron microscope (TEM), Fourier transform infrared (FT-IR) spectra, UV-Vis diffuse reflectance spectra (UV-vis DRS) and vibrating sample magnetometer (VSM). This photocatalyst of $TiO_2$/$Fe_3O_4$/MWCNTs was proved to exhibit high photocatalytic efficiency and the photodegradation rate could reach nearly 82.7% for the degradation of 1-methylimidazole-2-thiol under ultraviolet irradiation. In addition, the results demonstrated that inorganic ions had a negative impact on photodegradation of 1-methylimidazole-2-thiol to varying degrees. Moreover, pH had a great and complex effect on photocatalytic degradation of 1-methylimidazole-2-thiol under ultraviolet irradiation.

• Journal of the Korean Chemical Society
• /
• v.51 no.6
• /
• pp.506-512
• /
• 2007

Various long chain aliphatic acid hydrazides react with aromatic and heterocyclic aldehydes in alcoholic medium in refluxing conditions to give corresponding 2-hydroxy benzylidene and 1H-indol-3-ylmethylene hydrazides, a newer class of mosquito para-pheromones. We describe here synthesis of various novel long chain aliphatic acid (2- hydroxy benzylidene and 1H-indol-3-ylmethylene) hydrazides by conventional as well as microwave irradiation techniques. The structures of these compounds have been confirmed by spectroscopic techniques (FTIR, NMR & MS). Some of the interesting features of the electron impact mass spectral fragmentation pattern of these compounds have also been discussed.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.120-120
• /
• 2016

Ti-6Al-4V alloy have been used for dental implant because of its excellent biocompatibility, corrosion resistance, and mechanical properties. However, the integration of such implant in bone was not in good condition to achieve improved osseointergraiton. For solving this problem, calcium phosphate (CaP) has been applied as coating materials on Ti alloy implants for hard tissue applications because its chemical similarity to the inorganic component of human bone, capability of conducting bone formation and strong affinity to the surrounding bone tissue. Various metallic elements, such as strontium (Sr), magnesium (Mg), zinc (Zn), sodium (Na), silicon (Si), silver (Ag), and yttrium (Y) are known to play an important role in the bone formation and also affect bone mineral characteristics, such as crystallinity, degradation behavior, and mechanical properties. Especially, Zn is essential for the growth of the human and Zn coating has a major impact on the improvement of corrosion resistance. Plasma electrolytic oxidation (PEO) is a promising technology to produce porous and firmly adherent inorganic Zn containing $TiO_2(Zn-TiO_2)$coatings on Ti surface, and the a mount of Zn introduced in to the coatings can be optimized by altering the electrolyte composition. In this study, corrosion behavior of Ti-6Al-4V alloy after plasma electrolytic oxidation in solutions containing Ca, P and Zn were studied by scanning electron microscopy (SEM), AC impedance, and potentiodynamic polarization test. A series of $Zn-TiO_2$ coatings are produced on Ti dental implant using PEO, with the substitution degree, respectively, at 0, 5, 10 and 20%. The potentiodynamic polarization and AC impedance tests for corrosion behaviors were carried out in 0.9% NaCl solution at similar body temperature using a potentiostat with a scan rate of 1.67mV/s and potential range from -1500mV to +2000mV. Also, AC impedance was performed at frequencies ranging from 10MHz to 100kHz for corrosion resistance.

• Korean Journal of Food Science and Technology
• /
• v.22 no.1
• /
• pp.7-12
• /
• 1990

The effect of $Fe^{2+}$ and myoglobin on the oxidative stability of triglyceride molecular species was investigated at $25^{\circ}C$. The molecular species of soybean oil triglycerides were analyzed by capillary column gas chromatography and electron impact ionization mass spectrometry utilizing selected ion monitoring. When $Fe^{2+}$ and myoglobin were added to soybean oil triglycerides, the oxidative stability of each molecular species of triglycerides appeared to decrease in proportion to the increase in the number of double bonds present in the acyl residues, and it was affected by degree of unsaturation of fatty acid when the total degree of unsaturation of triglyceride was the same. But the length of the saturated acyl chain had no influence on the stabilization of unsaturated fatty acid present in the same glyceride when prooxidants were added.

• Journal of the Korean Chemical Society
• /
• v.44 no.6
• /
• pp.513-517
• /
• 2000

As a precursor of tetrathiafulvalene (TTF) derivative, 5,6-dimethyl-1,3-dithiolo[4,5-b][1,4]dithiin-2-thione (compound 3) was synthesized by the unusual Lawesson's reaction. Depending upon the substituents such as dimethyl and diphenyl groups, two different products containing 1,4-dithiin and thiophene moieties, respectively, were obtained and characterized by $^{13}C$ NMR and high-resolution electron impact (HREI) mass spectroscopy. The formation of 3 was further characterized by X-ray structure analysis. Crystallographic data for 3: triclinic, space group P1, a=4.145(2)$\AA$, b=10.600(2)$\AA$, c=12.279(2)$\AA$, $\alpha$=71.440(10)$^{\circ}$, $\beta$=84.30(2)$^{\circ}$, $\gamma$=87.31(2)$^{\circ}$, Z=2 and R(wR$_2$)=0.0559(0.1416). The formation mechanism of two products was suggested and compared each other.

• Journal of the Korean Chemical Society
• /
• v.47 no.2
• /
• pp.137-146
• /
• 2003

3-Hydroxybenzopyran[3,2-c]-[1]-benzopyran-6,7-diones (3) and 3-methoxycarbonylcoumarin (4) were prepared via condensation of 1 with resorcinol in the presence of sodium methoxide. The chemical behavior of 3 towards acetic anhydride, alkyl halides and diazonium chloride is described. The electron impact ionization mass spectra of compounds 4,5 and 6a,b show a weak molecular ion peak and a base peak of m/z 89, m/z 280. m/z 91 and m/z 120 resulting from a cleavage fragmentation respectively. The molecular ion of compounds 3, 6b, and 7a is a base peak of m/z 280, m/z 366 and m/z 488 respectively. Compound 7a give a characteristic fragmentation pattern with a two very stable fragmentation of m/z 383 and m/z 77.

• Journal of Adhesion and Interface
• /
• v.12 no.4
• /
• pp.144-150
• /
• 2011

The effect of low profile agent and release agent on the surface and mechanical properties of bulk mold compound were investigated. Atomic content and contact angle of surface were characterized using X-ray photoelectron spectroscopy and contact anglemeter. Surface morphology and surface roughness were obtained using field emission scanning electron microscope and atomic force microscope, respectively. As increasing the low profile agent from 0 to 9.2 wt%, the volume shrinkage and surface roughness decreased from 0.35% to 0.05%, and from $0.27{\mu}m$ to $0.12{\mu}m$, respectively. The increase of release agent from 1.8 wt% to 3.6 wt% resulted in the migration of release agent to sample surface and it increased the surface roughness. The flexural strength and impact strength were decreased approximately 30% as the low profile agent increasing from 5.0 wt% to 9.0 wt%.

• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.1
• /
• pp.75-92
• /
• 2015

This paper presents the application of the bond valence method to estimate the valence charge distribution in several perovskite systems: $La_{{\tilde{1}}x}Pb_xMnO_3$ (x=0.1-0.5), $La_{0.6}Sr_{0.{\tilde{4}}x}Ti_xMnO_3$ (x=0.0-0.25) and $La_{{\tilde{1}}x}Sr_xCoO_3$ (x=0.1-0.5); the reviewing of their crystal structures is also incorporated. The results showed the failure of the elastic bonding mechanism in all studied systems and revealed the general deficit of the valence charge in their unit cells. This valence deficit was not associated with the structural defects and was not equally localized in all coordination spheres. As the content of substitution increased, the charge deficit declined systematically from balanced level, signifying the transfer of valence charge from the ${\tilde{B}}O_6$ to ${\tilde{A}}O_{12}$ spheres. This transfer depended on the valence deviation of spheres and the average reached near 2 electron per unit cell. The possible impact of the limitted accuracy of the available structural data on the bond valence results has also been considered.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.2
• /
• pp.361-382
• /
• 1997

The effect of fluoride pretreatment upon root resorption after delayed replantation was studied in beagle dogs. Upper and lower incisors were extracted and bench dried for 45 minutes. 1% Stannous fluoride solution, 2% neutral sodium fluoride gel and 1.23% acidulated phosphate fluoride gel were used for the pre-treatment of replanted root surface in the experimental groups. Replantation was done with no treatment in control group. After of an experimental periods 3 weeks, animals were sacrificed by perfusion followed by sample preparation. A histomorphometric method was applied for evaluation of tissue reactions observed in each group under light microscope. Scanning electron microscopic observation was done to find out any different surface topography between groups. The results were as follows: 1. Fluoride-treated groups showed in general the better healing patterns than untreated control group. 2. Comparisons between three experimental groups revealed the general superiority of APF-treated group over the other groups in terms of tissue healing reaction by showing the highest frequency in uncomplicated healing pattern and surface resorption and the lowest in inflammatory resorption, but with no statistical significance(p>.05). 3. Scanning elecron micrographs showed the irregular distribution of resorption cavities and the attached bone of variable size and shape in all groups. 4. It can be concluded that the types of fluoride did not have significant impact on the early tissue reactions after delayed replantation under the condition of the present experiment.