• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2000.06a
• /
• pp.7-10
• /
• 2000

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1309-1311
• /
• 2000

본 논문에서는 입력부, 특고압 발생부 및 고압 정류부, IGBT Pulse Switch로 구성된 Gyro-klystron용 대전력, 고전압, 전류 펄스 전원장치의 설계 및 개발에 대하여 기술하였다. 대전력, 고전압, 전류 펄스 전원장치를 위한 각 구성부분의 제어 및 설계 특징은 다음과 같다. 입력부인 IGBT Inverter는 펄스 전원장치의 전압 제어를 위하여 출력 고전압을 Feedback System 제어에 의해 Pulse 설정 전압을 갖도록 제어하며, 또한 Pulse 출력중에 직류 고전압부의 전압강하, 즉 Pulse 전압의 Drop이 커지는 것을 방지하기 위하여 Fast Dynamics를 갖도록 Feedback System을 구성하였다. 3대의 단상 특고압 승압변압기가 직렬로 구성된 특고압 발생부는 PWM된 전압을 입력받아 특고압으로 승압시킨다. 특고압 변압기는 고압 Pulse성 전압과 매우 높은 dV/dt 전압이 인가되므로 Stray Capacitance가 최소가 되어야 하며 절연파괴로부터 보호될 수 있어야 한다. 고압 정류부는 Inverter와 특고압변압기에 의하여 전원이 공급되므로 교류전압의 교번순간에 매우 높은 전압 변동률을 가지는 Fast Recovery High Voltage Rectifier로 설계, 제작되어졌다. Pulse Switch인 IGBT Switch는 Gate Driver에 의해 구동되어 진다. 주어진 Pulse 사양을 만족시키며 특히 소자의 전압 특성을 고려하여 120KV의 전압값을 갖도록 설계, 제작하였다. 본 논문에서는 고전압 펄스 전원장치 각 부분의 설계에 대하여 기본적인 사항들을 제시하며, 실험결과를 통하여 제안된 방식의 우수한 특성을 입증한다.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.20 no.1
• /
• pp.102-112
• /
• 2002

Cathode ray tubes (CRT) are the most common electronic display in use in information technology. The CRT consists of an electron gun, electrostatic or magnetic fields to direct the electron beam, and a phosphor screen. When the electron beam strikes the phosphor screen, the phosphor generates light. The phosphor screen has formed by precipitation method, electro-forming and centrifuge method. The high quality product was achieved by electro-forming or centrifuge method. Now applying method is electro-forming used with phosphor and Eh(isopropyl alcohol). Now applying method has been much consumption of raw-material, dirty working environment, dangerous fire and require of high cost. New method to form phosphor surface of monochrome is required to improve this matter. This study was developed novel method to form the phosphor surface by heat-transfer method. This method have advantages of simple process, automatization, clean environment, saving raw material and saving running-cost.

• Journal of Korean Vacuum Science & Technology
• /
• v.3 no.1
• /
• pp.59-65
• /
• 1999

There has been an interest to develop an efficient, compact microwave device using field-emitter-arrays (FEA)-based cathode. Toe valuate the optimum device-efficiency in a compact size, the propagation properties of the premodulated electron beam for the FEA-based cathode is studied in detail by the computer simulation using a PIC code, MAGIC. For the premodulated electron beam whose phase of the energy leads the phase of the current by $\pi$/2, the amplitude of the downstream current modulation can be kept as high as the initial modulation level. Using the beam parameters with the beam voltage of 6kV and the current of 2.0A, 30% of efficiency is predicted when the quality factor of 800 is chosen. the device length is reduced about twice compared with that of the conventional device. The design of practical planar cathode is carried out to meet the minimum diameter of the electron beam as 0.5 mm.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.10
• /
• pp.28-34
• /
• 1997

This paper describes an automatic measurement method for the in-line inspection of assembly tolerances of cathod ray electron guns. The method uses an optical microscope with a CCD camera as a probe. An automatic gap recognition algorthm with digital image processing and a new software autofocus algorithm based on using an optimal edge detector have been developed to improve the measuring accuracy. An inspection system has been proposed and practically implemented for in-line inspection to a real factory automation line. The inspection system consists of a gap inspection part and an eyelet. Total time consumed for inspecting all measuring items is about 10 seconds and the repeatability is below .+-. 5 .mu. m

• Journal of the Mineralogical Society of Korea
• /
• v.2 no.1
• /
• pp.37-46
• /
• 1989

X-ray, optical and electron microscope studies exhibit that the amphiboles in anorthositic saprolite from kaolin deposits, located in Suryun-myeon, Seongju-gun, Kyungsangbuk-do, have altered under weathering conditions to smectite, mixed-layer mineral, vermiculite and goethite. In early supergene alteration stage when rock structure is still preserved, smectite occurs as initial weathering product of amphibole. Further weathering leads to the formation of mixed-layer mineral, vermiculite and goethite as indicated by XRD and SEM studies. Scanning electron microscopy studies of amphibole show that the dissolution of amphibole proceeds by selective etching at the surface along weaker zones producing distinct etch pattern, The calcic amphiboles according to electron microprobe analyses, show leaching of the most mobile elements (Mg, Ca and Fe) during alteration.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2001.07a
• /
• pp.81-81
• /
• 2001

• Nuclear Engineering and Technology
• /
• v.48 no.3
• /
• pp.785-794
• /
• 2016

The Argonne National Laboratory of the United States and the Kharkov Institute of Physics and Technology of the Ukraine have been collaborating on the design, development and construction of a neutron source facility at Kharkov Institute of Physics and Technology utilizing an electron-accelerator-driven subcritical assembly. The electron beam power is 100 kW using 100-MeV electrons. The facility was designed to perform basic and applied nuclear research, produce medical isotopes, and train nuclear specialists. The biological shield of the accelerator building was designed to reduce the biological dose to less than 5.0e-03 mSv/h during operation. The main source of the biological dose for the accelerator building is the photons and neutrons generated from different interactions of leaked electrons from the electron gun and the accelerator sections with the surrounding components and materials. The Monte Carlo N-particle extended code (MCNPX) was used for the shielding calculations because of its capability to perform electron-, photon-, and neutron-coupled transport simulations. The photon dose was tallied using the MCNPX calculation, starting with the leaked electrons. However, it is difficult to accurately tally the neutron dose directly from the leaked electrons. The neutron yield per electron from the interactions with the surrounding components is very small, ~0.01 neutron for 100-MeV electron and even smaller for lower-energy electrons. This causes difficulties for the Monte Carlo analyses and consumes tremendous computation resources for tallying the neutron dose outside the shield boundary with an acceptable accuracy. To avoid these difficulties, the SOURCE and TALLYX user subroutines of MCNPX were utilized for this study. The generated neutrons were banked, together with all related parameters, for a subsequent MCNPX calculation to obtain the neutron dose. The weight windows variance reduction technique was also utilized for both neutron and photon dose calculations. Two shielding materials, heavy concrete and ordinary concrete, were considered for the shield design. The main goal is to maintain the total dose outside the shield boundary less than 5.0e-03 mSv/h during operation. The shield configuration and parameters of the accelerator building were determined and are presented in this paper.

• Journal of Powder Materials
• /
• v.21 no.1
• /
• pp.44-49
• /
• 2014

In this study, nanocrystalline nickel powders were cold compacted by a dynamic compaction method using a single-stage gas gun system. A bending test was conducted to measure the bonding strengths of the compacted regions and microstructures of the specimen were analyzed using a scanning electron microscopy. The specimen was separated into two parts by a horizontal crack after compaction. Density test shows that the powder compaction occurred only in the upper part of the specimen. Brittle fracture was occurred during the bending test of the compact sample. Dispersion of shock energy due to spalling highly affected the bonding status of the nanocrystalline nickel powder.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.1
• /
• pp.78-81
• /
• 2008

A hollow cathode which has extremely stable discharge characteristic has been developed. This is composed of the two separated lanthanum hexaboride(LaB6) of a disk type in the tube as the electron emitters. The way of design is of great advantage to extend the surface discharge area of the LaB6, which is also useful for optimal fixing of the LaB6. The hollow cathode is capable of producing 30 kW(100 V, 300 A) of power continuously. Because the generated plasma beam with the high temperature(above $3000^{\circ}C$) from the hollow cathode passes through the center hole of the two intermediate electrodes, it is designed with the high temperature material of the tungsten and the suitable structure of the water cooling. The combinations of the hollow cathode and the two intermediate electrodes are practically useful for the ion plating plasma beam source.