• Journal of the Korean Magnetic Resonance Society
• /
• v.9 no.1
• /
• pp.1-20
• /
• 2005

Vanadium-incorporated aluminophophate molecular sieve VH-SAPO-11 has been studied by electron spin resonanace (ESR) and electron spin echo modulation (ESEM) spectroscopies to determine the vanadium locatin and interaction with various adsorbate molecules. As-synthsized VH-SAPO-11 contains only vanady1 species with distored octahral coordination. After calcinations in $O_2$ and exposure to moisture, only species A is observed with reduced intensities. Species A is suggested as a VO$(H_2O)_2^{2+$} complex coordinate to three framwork oxygen bonded to aluminum. When calcined, hydrate VH-SAPO-11 is dehydrated at elevated temperature, species A loses it water ligands and transforms to $VO^{2+}$ ions coordinated to three framework oxygens (species B). Species B reduces its intensities significantly after treatment with $O_2$at high temperature, thus suggesting oxidation of $v^{4+}$to $v^{5+}$. When dehydrated VH-SAPO-11 contacts with $D_2O$ at room temperature, the ESR signal of species A is observed. This species assumed as a $VO(O_f)_3(D_2O)_2$, by considering 3 framework oxygens. Adsorption of deuterated methanol on dehydrated VH-SAPO-11 results in another new vanadium species D, which is identified as a $VO(CD_{3}OH)$ complex. When deuterated ethanol is adsorbed on dehydrated VH-SAPO-11, another new vanadium species E identified as a $VO(C_{2}H_{5}OD)^{2+}$, is observed. When deuterated propanol is adsorbed on dehydrated VH-SAPO-11, a new vanadium species F identified as a $VO(C_{3}H_{7}OD)$, is observed. Possible coordination geometries of these various complexes are discussed.

• Journal of Periodontal and Implant Science
• /
• v.48 no.3
• /
• pp.164-173
• /
• 2018

Purpose: The aim of this study was to evaluate the antimicrobial effect of a newly devised toothbrush with light-emitting diodes (LEDs) on Porphyromonas gingivalis attached to sandblasted and acid-etched titanium surfaces. Methods: The study included a control group, a commercial photodynamic therapy (PDT) group, and 3 test groups (B, BL, and BLE). The disks in the PDT group were placed in methylene blue and then irradiated with a diode laser. The B disks were only brushed, the BL disks were brushed with an LED toothbrush, and the BLE disks were placed into erythrosine and then brushed with an LED toothbrush. After the different treatments, bacteria were detached from the disks and spread on selective agar. The number of viable bacteria and percentage of bacterial reduction were determined from colony counts. Scanning electron microscopy was performed to visualize bacterial alterations. Results: The number of viable bacteria in the BLE group was significantly lower than that in the other groups (P<0.05). Scanning electron microscopy showed that bacterial cell walls were intact in the control and B groups, but changed after commercial PDT and LED exposure. Conclusions: The findings suggest that an LED toothbrush with erythrosine treatment was more effective than a commercial PDT kit in reducing the number of P. gingivalis cells attached to surface-modified titanium in vitro.

• Journal of Life Science
• /
• v.21 no.8
• /
• pp.1100-1108
• /
• 2011

The immunomodulating effects of moxifloxacin seem to be effective in downregulating inflammatory reactions. This presumed effect was tested in endotoxin (ETX)-induced acute lung injury (ALI) in rats. After moxifloxacin treatment (10 mg/kg) of ETX-given rats, lung myeloperoxidase (MPO) activity, bronchoalveolar-lavage (BAL) protein, and the number of neutrophils in the BAL cells were measured. Light and electron microscopic structures were also examined. Electron microscopic $CeCl_3$ histochemistry for the detection of hydrogen peroxide in the lungs and immunohistochemistry of cytosolic phospholipase A2 (cPLA2) in the lung tissues and BAL cells were performed. To examine the expression of TNF${\alpha}$ in the lungs, western blotting was carried out with the lung tissues. ETX had accumulated neutrophils in the lungs, which was followed by lung leak. Oxidative stress occurred, and increased expression of cPLA2 in the lung tissues and BAL cells was observed in the ETX-given rats. Simultaneously, the expression of TNF${\alpha}$ was enhanced by ETX. Moxifloxacin, however, decreased all these parameters, indicating that ALI may have been ameliorated. Moxifloxacin appears to ameliorate ETX-induced ALI partially through the suppression of cPLA2 in the lungs of rats.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.306-308
• /
• 2007

Poly(ethylene glycol) dimethyl ether (PEGDME)/fumed silica/ 1-methyl -3-propylimidazolium iodide (MPII)/$I_2$ mixtures were used as polymer electrolytes in solid state dye-sensitized solar cells (DSSCs). The contents of MPII were changed and the concentration of $I_2$ was fixed at 0.1 mole% with respect to the MPII. The maximum ionic conductivity was obtained at [EG]:[MPII]:[$I_2$]=10:1.5:0.15. It was supposed that the maximum of ionic conductivities would match with that of cell efficiencies, if the ionic conductivity is a rate determining step in the sol id state DSSCs. However, the maximum composition did not show the maximum solar cell performance, indicating the mismatch between ionic conductivity and cell performance. This suggests that the ionic conductivity may not be the rate controlling step in determining the cell efficiency in these experimental conditions, whereas other parameters such as the electron recombination might play an important role. Thus, we tried to modify the surface of the $TiO_2$ particles by coating a thin metal oxide such as $Al_2O_3$ or $Nb_2O_5$ layer to prevent electron recombination. As a result, the maximum of the cell efficiency was shifted to that of the ionic conductivity. The peak shifts were also attempted to be explained by the diffusion coefficient and the lifetime of electrons in the $TiO_2$ layer.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.2
• /
• pp.142-149
• /
• 2013

Carbon materials are mainly used as catalyst supports for polymer exchange membrane fuel cell (PEMFC). Catalyst supports are required specific characteristics of the carbon materials, such as large surface area and high electrical conductivity. Attempted were to improve electrical conductivity and to maintain high surface area of carbon materials using a microwave treatment. Microwave treatment, as a relatively new technique, takes short reaction time and reduce the consumption of the gases used for carbon treatment compared to a traditional heat treatment. Hybrid carbon (ACF/Graphene) as catalyst supports by microwave-irradiation method for PEMFC increase the cell performance because of increased electrical conductivity resulting in triple-phase contact and reduced the interfacial resistance. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-Ray Diffraction (XRD) were employed to analyze carbon materials. The performance of microwave-treated carbon materials was evaluated by measuring current-voltage (I-V) characteristics and electrode impedance.

• The Plant Pathology Journal
• /
• v.18 no.3
• /
• pp.115-120
• /
• 2002

Xanthomonas axonopodis pv. glycines, the causal agent of bacterial pustule of soybean, induces hypersensitive response (HR) in a non-host plant, hot pepper (Capsicum annuum). A wild-type strain (8ra) and its non-patho-genic mutant (8-13) of X. axonopodis pv. glycines were inoculated into the pepper leaf tissues and their subcellular responses to the bacterial infections were examined by electron microscopy. Intrastructural changes related to HR were found in the leaf tissues infected with 8ra from 8 h after inoculation, characterized by separation of plasmalemma from the cell wall, formation of small vacuoles and vesicles, formation of cell wall apposition, and cellular necrosis. No such responses were observed in the tissues infected with the mutant. In 8ra, the bacterial cells were attached to the cell walls, with the cell wall material dissolved into and appearing to encapsulate the bacterial cells. The bacterial cells later became entirely embedded in the cell wall material. On the other hand, in 8-13, the bacterial cells were usually not attached tightly to the plant cell wall, and no or poor encapsulation of the bacteria by the wall material occurred, although these were encircled by rather loose wall materials at the later stages.

• Applied Microscopy
• /
• v.22 no.1
• /
• pp.79-88
• /
• 1992

In order to identify the effects of the kainic acid in the retina kainic acid (120 nmol/$5{\mu}l$) were injected through the pars plana of the ciliary body into the duck eye ball at 7th day after hatching. The animals were sacrificed by decapitation on the 1st, 4th and 10th day after injection of the kainic acid. The specimen was processed for the light and electron microscopes respectively. The results obtained were as followings 1. The inner nuclear, inner plexiform and ganglion cell layers of the retina showed marked changes in all of the groups. 2. The cells in the inner nuclear layer showed marked degenerative changes of the organelles including the pyknoses and destruction of the nucleus on the 1st day after injection. These destructive changes of the cells were progressively disappeared until the 10th day after injection. 3. After injection of the kainic acid the neurites of the inner plexiform layer were swollen at the first, and thereafter those changes were gradually disappeared until the 10th day. 4. In the ganglion cell defected by the kinic acid, the enlargement and segmentation of the endoplasmic reticulum and pyknosis of the nucleus were-observed in all the groups, although the lipid droplets were only shown in the 4th day. From the above results, the evidence suggests that kainic acid gives to the toxic effect on the nuurons of the retina with exception of the photoreceptors.

• Carbon letters
• /
• v.11 no.1
• /
• pp.38-40
• /
• 2010

Carbon supported electrocatalysts are commonly used as electrode materials for polymer electrolyte membrane fuel cells(PEMFCs). These kinds of electrocatalysts provide large surface area and sufficient electrical conductivity. The support of typical PEM fuel cell catalysts has been a traditional conductive type of carbon black. However, even though the carbon particles conduct electrons, there is still significant portion of Pt that is isolated from the external circuit and the PEM, resulting in a low Pt utilization. Herein, new types of carbon materials to effectively utilize the Pt catalyst are being evaluated. Carbon nanofiber/activated carbon fiber (CNF/ACF) composite with multifunctional surfaces were prepared through catalytic growth of CNFs on ACFs. Nickel nitrate was used as a precursor of the catalyst to synthesize carbon nanofibers(CNFs). CNFs were synthesized by pyrolysising $CH_4$ using catalysts dispersed in acetone and ACF(activated carbon fiber). The as-prepared samples were characterized with transmission electron microscopy(TEM), scanning electron microscopy(SEM). In TEM image, carbon nanofibers were synthesized on the ACF to form a three-dimensional network. Pt/CNF/ACF was employed as a catalyst for PEMFC. As the ratio of prepared catalyst to commercial catalyst was changed from 0 to 50%, the performance of the mixture of 30 wt% of Pt/CNF/ACF and 70wt% of Pt/C commercial catalyst showed better perfromance than that of 100% commercial catalyst. The unique structure of CNF can supply the significant site for the stabilization of Pt particles. CNF/ACF is expected to be promising support to improve the performance in PEMFC.

• Journal of Powder Materials
• /
• v.25 no.4
• /
• pp.340-345
• /
• 2018

Additive manufacturing by electron beam melting is an affordable process for fabricating near net shaped parts of titanium and its alloys. 3D additive-manufactured parts have various kinds of voids, lack of fusion, etc., and they may affect crack initiation and propagation. Post process is necessary to eliminate or minimize these defects. Hot isostatic pressing (HIP) is the main method, which is expensive. The objective of this paper is to achieve an optimum and simple post heat treatment process without the HIP process. Various post heat treatments are conducted for the 3D-printed Ti-6Al-4V specimen below and above the beta transus temperature ($996^{\circ}C$). The as-fabricated EBM Ti-6Al-4V alloy has an ${\alpha}^{\prime}$-martensite structure and transforms into the ${\alpha}+{\beta}$ duplex phase during the post heat treatment. The fatigue strength of the as-fabricated specimen is 400 MPa. The post heat treatment at $1000^{\circ}C/30min/AC$ increases the fatigue strength to 420 MPa. By post heat treatment, the interior pore size and the pore volume fraction are reduced and this can increase the fatigue limit.

• Archives of Pharmacal Research
• /
• v.11 no.1
• /
• pp.33-40
• /
• 1988

Two new nitro analogs of tranylcypromine, (E)-2-(p-nitrophenyl)cyclopropylamine ((E)-p-NTCP) and (E)-2-(m-nitrophenyl)cyclopropylamine ((E)-m-NTCP) were synthesized in order to examine the effect of aromatic nitro substitution on the MAO-inhibitory activity of 2-phenylcyclopropylamines. The compounds were obtained by treating t-butyl (E)-2-(p-nitrophenyl) cyclopropanecarbamate and t-butyl (E)-2-(m-nitrophenyl)cyclopropanecarbamate with p-toluenesulfonic acid in $CH_3$CN. Inhibitions of rat brain mitochondrial MAO-A and B by the compounds were examined using serotonin and benzylamine as the substrate at both in vitro and ex vivo levels. It was found from in vitro measurements that (E)-p-NTCP at $6.0{\times}10^{-5}M$ elicited merely 22.5% inhibition against MAO-B without any effect on MAO-A. In contrast, (E)-m-NTCP showed fair degrees of inhibitions of MAO-A and B with $IC_{50}$ values, $2.5{\times}10^{-7}M\;and\;1.4{\times}10^{-6}M$, respectively. It was also noted from (E)-m-NTCP that m-nitro substitution caused a shift of selectivity of the inhibition toward MAO-A. According to ex vivo measurements at 1.5, 3, 6, and 12 hr following the administration of a dose of 0.015 mmol/kg, i.p. to the rats, the inhibition percents of MAO-A by (E)-m-NTCP were 58.6, 63.7 63.6, and 46.6%, slightly lower than those observed by tranylcypromine. Whereas, (E)-m-NTCP at the same dose level did not show significant inhibitions against both MAO-A and MAO-B. Possible reasons for the difference in potencies between (E)-m-NTCP and (E)-p-NTCP were sought in relation to differing electron withdrawing effects of m- and p-substituents which will influence electron density of the side chain amino functions and the partitions.