• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2004년도 추계학술발표회 논문집
• /
• pp.238-244
• /
• 2004

In this study we have examined Copper and Nickel double metal layer on the synthetic fabrics by electroless chemical plating. We have focused on the shielding effect of the four kinds of woven and none-woven structure against electromagnetic fields. The shielding effectiveness of Copper and Nickel double metal layer showed between 90dB and 70dB, which are closely related to the fabric structure, that is cover factor and density. The more dense, The better shielding effect.

• 한국화재소방학회논문지
• /
• 제30권4호
• /
• pp.94-102
• /
• 2016

EMP 방호용 차폐 시설을 구축 할 때 소화 배관들의 방호 처리를 위하여 WBC 효과를 이용하며, 차폐도를 높이기 위해서 소화 배관 내부에 허니컴을 삽입한다. 이때 허니컴 단위 셀의 크기가 작으면 물의 흐름에 지장을 주며, 침전물에 의하여 소화 배관이 막히게 된다. 이것을 방지하기 위하여, 물의 분극손실에 의한 차폐도를 이용해서, 허니컴 셀의 크기는 키우고, 두께는 얇게 하면서도 요구하는 차폐도를 얻을 수 있는 설계 방법을 제시하였다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1241-1242
• /
• 2006

Electromagnetic properties of $CeO_2$ doped and undoped YBaCuO superconductors were evaluated to investigate the effect of pinning center on the magnetization and magnetic shielding. The variation $\DeltaM$ with doping was maximum for 3% doping and decrease with further doping. The magnetic shielding was evaluated by measuring the induced voltage in secondary coil and the voltage initially set to 0.5V, decreased to 0.17V and 0.28V respectively for the undoped and 3% $CeO_2$ doped sample. The much less change in the induced voltage for the 3% doped sample is attributed to the increased flux shielding by shielding vortex current. The $CeO_2$ was converted to fine $BaCeO_3$ particles which were trapped in YBaCuO superconductor during the reaction sintering. The trapped fine particles, $BaCeO_3$ may be acted as a flux pinning center.

• 한국전자파학회논문지
• /
• 제27권8호
• /
• pp.742-749
• /
• 2016

현재 화석연료의 고갈 및 신재생 에너지의 필요성에 따라서 바람이 풍부한 해안지대에서 풍력발전단지가 건설되고 있다. 하지만 군사작전 지역 인근에 풍력발전단지가 건설되어질 경우, 풍력발전기의 레이다 차폐 현상 및 도플러 변조로 인하여 운용 중인 군사 레이다에 방해 현상을 초래할 수 있다. 이에 따라 실제 풍력발전기를 통한 전자기적 현상의 분석이 필요하다. 본 논문에서는 기존 문헌의 발전기 형태에 따른 이론적인 차폐거리 및 레이다 신호 모델링을 통하여 얻어진 도플러 주파수와 실제 운용되는 풍력발전기에서 측정된 전자기적 차폐거리 및 도플러 주파수의 비교를 수행하였다.

• 전자공학회논문지 IE
• /
• 제44권2호
• /
• pp.21-25
• /
• 2007

본 논문에서는 표면저항을 이용한 차폐성능 및 다층박막의 광학설계 후, roll- to-roll DC 스퍼터링 공정을 이용하여 PET(Polyethylene terephtalate) 필름위에 투명 전도성 산화물 박막인 ITO와 금속을 다층박막 구조(Multilayer)로 균질하게 증착한 전파차폐필름을 1m 넓이로 제작하고 광투과 및 전파차폐특성을 조사하였다. 각 층의 면저항 및 두께에 따라서 전자파 차폐성능과 광투과도를 최적화 할 수 있도록 설계되었고, 그 조건에 따라 필름을 제작하였다. 제작된 전파차폐필름은 2-18GHz 대역에서 99.5%의 차폐성능을 나타내었으며, 400-700 nm에서의 전광선 투과율은 83.1%로 우수한 시인성과 전파차폐특성을 보유하였다.

• Carbon letters
• /
• 제9권4호
• /
• pp.298-302
• /
• 2008

Carbon blacks could be used as the filler for the electromagnetic interference (EMI) shielding. The poly vinyl alcohol (PVA) and polyvinylidene fluoride (PVDF) were used as the matrix for the carbon black fillers. Porous carbon blacks were prepared by $CO_2$ activation. The activation was performed by treating the carbon blacks in $CO_2$ to different degrees of burnoff. During the activation, the enlargement of pore diameters, and development of microporous and mesoporous structures were introduced in the carbon blacks, resulting in an increase of extremely large specific surface areas. The porosity of carbon blacks was an increasing function of the degree of burn-off. The surface area increased from $80\;m^2/g$ to $1142\;m^2/g$ and the total pore volume increased from $0.14073\;cc{\cdot}g^{-1}$ to $0.9343\;cc{\cdot}g^{-1}$. Also, the C=O functional group characterized by aldehydes, ketones, carboxylic acids and esters was enhanced during the activation process. The EMI shielding effectiveness (SE) of raw N330 carbon blacks filled with PVA was about 1 dB and those of the activated carbon blacks increased to the values between 6 and 9 dB. The EMI SE of raw N330 carbon blacks filled with PVDF was about 7 dB and the EMI SE increased to the range from 11 to 15 dB by the activation.

• 한국기계가공학회지
• /
• 제7권4호
• /
• pp.10-16
• /
• 2008

This study investigated electromagnetic interference(EMI) shielding effectiveness(SE) of the aluminum film, conductive fabric and nano carbon black carbon fiber reinforced composites. We fabricated carbon fiber reinforced composites filled with nano carbon black where they bonded aluminum film and conductive fabric. The measurements of SE were carried out frequency range from 300MHz to 1.5GHz. It is observed that the SE of the bonded aluminum film and conductive fabric composites is the frequency dependent, increase with the increase in filler nano carbon black content. The aluminum film bonded composites showed higher SE compared to that of carbon black and conductive fabric. The aluminum film bonded epoxy composite was shown to exhibit up to 80dB of SE. The result that aluminum film bonded composite can be used for the purpose of EMI shielding as well as for some microwave applications.

• 마이크로전자및패키징학회지
• /
• 제23권2호
• /
• pp.57-63
• /
• 2016

We developed a flexible and micro-thick electromagnetic interference (EMI) shielding nanofabric layer that also functions as a water resisting and heat sinking material. Electrospinning followed by a simple heat treatment process was carried on to produce the EMI-shielding Ni/C hybrid nanofibers. The ambient oxygen partial pressure ($pO_2$ = 0.1, 0.7, 1.3 Torr) applied during the heat treatment was varied in order to optimize the effectiveness of EMI-shielding by modifying the size and crystallinity of the magnetic Ni nanoparticles distributed throughout the C nanofibers. Permittivity and permeability of the nanofibers under the electromagnetic (EM) wave frequency range of 300 MHz~1 GHz were measured, which implied the EMI-shielding effectiveness (SE) optimization at $pO_2$ = 0.7 Torr during the heat treatment. The materials' heat diffusivity for both in-plane direction and vertical direction was measured to confirm the anisotropic thermal diffusivity that can effectively deliver and sink the local heat produced during device operations. Also, the nanofibers were aged at room temperature in oxygen ambient for water resisting function.

• Composites Research
• /
• 제35권4호
• /
• pp.223-231
• /
• 2022

최근 미래 모빌리티 시장의 급격한 성장으로 자동차에 전장부품이 다량 탑재되면서 부품간 오작동을 최소화하기 위해 자동차 시장에서도 전자파 차폐에 대한 중요성이 커지고 있다. 이에 따라 전기전도성 고분자 복합소재(Conductive Polymer Composites, CPC)가 자동차용 차폐재로 각광받고 있으나, 산업에 일반적으로 요구되는 20 dB 이상의 전자파 차폐 성능 달성을 위해서는 고 함량의 전도성 필러 충진이 요구되므로 기계적 물성 향상, 원가 절감 측면에서 CPC의 전도성 필러 함량을 줄이기 위한 연구가 필수적이다. 본 논문에서는 이 중 필러 함량을 획기적으로 줄일 수 있는 Segregated structure 필러 네트워크 기반의 CPC를 제조하기 위한 공법들을 소개하고, 각 제조 공법 별 전자파 차폐 성능을 비교하고 분석하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.350-353
• /
• 2009

The shielding enclosure is very essential device to test the electromagnetic wave power generated by various RF equipments. Some standards for the shielding enclosures were established to test them in right method. Generally, There are IEEE-STD-299 and MIL-STD-285 and NSA-65-6 of the method for measuring the effectiveness of shielding enclosures, the IEEE-STD-299 combined MIL-STD-285 and NSA-65-6 about the method for measuring shielding effectiveness(SE) about 1969 years, but, the measurement point of 299 proposal is many points(including shielding wall, seam, coner beat, shielding door, etc) and demand long time of measurement. To improve SE test method for shielding enclosures was studied and suggested to develop a proper test procedure. First, we measure reference level as frequency range and H/V polarization, secondly, measure leakage point, and finally, measure shield effect and calculate SE. Our method has a merit of the less measurement point than IEEE-STD-299, and shorten time than 299, and define representation SE of shielding enclosure effectively.