• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.276-281
• /
• 2010

In this paper, an electromagnetic induction on a telecommunication line by the distribution line of a power provision system or a feeder line of an electrified railway system has been verified through experiments. The basic cause of induction occurrence by these practical power provision systems is the returning current through the earth. This principle has been confirmed by the experiments documented in this paper which implemented these mechanisms to incur an induction. Experimental methods were used to produce the returning current through the earth. The experiment to find a relationship between inducing strength and the distance between the two phase lines in a power provision line has also been included to confirm that, when the distance is enlarged, the induction effect increases as the cross-nullification effect of magnetic fluxes decreases. An experiment for the existence of a shielding effect by another conduction length material has been addedas a protection measure against the induction.

• 소성∙가공
• /
• 제16권2호
• /
• pp.113-119
• /
• 2007

Rapid mold heating has been recent issue to enable the injection molding of thin-walled parts or micro/nano structures. Induction heating is an efficient way to heat material by means of an electric current that is caused to flow through the material or its container by electromagnetic induction. It has various applications such as heat treatment, brazing, welding, melting, and mold heating. The present study covers a finite element analysis of the induction heating process which can rapidly raise mold temperature. To simulate the induction heating process, the electromagnetic field analysis and transient heat transfer analysis are required collectively. In this study, a coupled analysis connecting electromagnetic analysis with heat transfer simulation is carried out. The estimated temperature changes are compared with experimental measurements for various heating conditions.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권4호
• /
• pp.179-186
• /
• 2008

콘크리트 구조물 내의 철근탐사는 구조물의 상태를 평가하는 가장 중요한 단계중의 하나이다. 콘크리트 내의 철근 탐사 장비는 전자파레이더법과 전자기 유도법의 원리를 적용하고 있으며, 본 연구에서는 두 가지 원리를 적용한 비파괴시험장비의 철근직경, 피복두께 및 습윤상태에 따른 철근탐사 신뢰성을 시험적으로 분석하였다. 시험에는 1,000mm(길이)${\times}$300mm(폭)인 9개의 콘크리트 시험체가 이용되었으며, 시험체내 철근의 피복두께는 45, 60, 100mm로 변화시키고 배근간격은 100mm이상으로 하였다. 시험결과, 전자기 유도법의 경우, 철근직경이 커짐에 따라 오차가 증가하는 것으로 나타났다. 그 반면에 전자파레이더법의 경우, 실제 피복두께에 맞는 비유전율에 따라 계측하여 깊은 심도의 경우에도 신뢰성이 우수한 것으로 나타났다.

• 한국정밀공학회지
• /
• 제29권11호
• /
• pp.1159-1163
• /
• 2012

In this paper, we would like to introduce two dimensional non-contact position sensor by using an electromagnetic induction based coil system and an algorithm to estimate the position of pointer. The sensor which will introduce in this paper is composed of a pointer including LC resonant circuit and a sensor board to detect the electromagnetic signal from the pointer. Because of the simplicity shape of the line antenna, low cost and free form curved shape of the sensor device is possible. In this research, we proposed a new two dimensional non-contact type electromagnetic sensor system and realized the proposed sensor device. From the experiments, the proposed device can be employed for the two dimensional position sensor.

• Smart Structures and Systems
• /
• 제3권3호
• /
• pp.385-403
• /
• 2007

The effectiveness of the newly developed smart passive control system employing a magnetorheological (MR) damper and an electromagnetic induction (EMI) part for seismic protection of base isolated structures is numerically investigated. An EMI part in the system consists of a permanent magnet and a coil, which changes the kinetic energy of the deformation of an MR damper into the electric energy (i.e. the induced current) according to the Faraday's law of electromagnetic induction. In the smart passive control system, the damping characteristics of an MR damper are varied with the current input generated from an EMI part. Hence, it does not need any control system consisting of sensors, a controller and an external power source. This makes the system much simpler as well as more economic. To verify the efficacy of the smart passive control system, a series of numerical simulations are carried out by considering the benchmark base isolated structure control problems. The numerical simulation results show that the smart passive control system has the comparable control performance to the conventional MR damper-based semiactive control system. Therefore, the smart passive control system could be considered as one of the promising control devices for seismic protection of seismically excited base isolated structures.

• Nuclear Engineering and Technology
• /
• 제52권7호
• /
• pp.1380-1385
• /
• 2020

An annular linear induction electromagnetic pump (ALIP) which has a developed pressure of 0.76 bar and a flow rate of 100 L/min is designed to analysis end effect which is main problem to use ALIP in thermohydraulic system of the prototype generation-IV sodium-cooled fast reactor (PGSFR). Because there is no moving part which is directly in contact with the liquid, such as the impeller of a mechanical pump, an ALIP is one of the best options for transporting sodium, considering the high temperature and reactivity of liquid sodium. For the analysis of an ALIP, some of the most important characteristics are the electromagnetic properties such as the magnetic field, current density, and the Lorentz force. These electromagnetic properties not only affect the performance of an ALIP, but they additionally influence the end effect. The end effect is caused by distortion to the electromagnetic field at both ends of an ALIP, influencing both the flow stability and developed pressure. The electromagnetic field distribution in an ALIP is analyzed in this study by solving Maxwell's equations and using numerical analysis.

• 한국건축시공학회지
• /
• 제9권1호
• /
• pp.103-109
• /
• 2009

Strong winds according to global warming cause the increase of the frequency and the repair cost of damaged roofs. In the United States, Factory Mutual Insurance Company(FMIC) promotes the roofing design that resists heavy wind-load, as the means of strict criteria. This fact reveals that more durable roofing system will be also required in Korea. Therefore, this study aims at developing such a system with high wind-resistance performance using Thermoplastic polyolefin(TPO) and Electromagnetic induction technology(EIT) than the previous systems. The system presented in this study consists of 4 main devices as follow; 1) a disc to fix sheets for TPO & EIT method, which can conduct structural design according to site condition, such as region, building height, and wind load. 2) a nail to have about 30% stronger lifting-up capacity than that of the previous nail. 3) a disc to fix sheets, which has triangle protuberance not to damage sheets in the repeatable wind load, and 4) a electromagnetic induction device to combine a disc and a sheet by heating uniformly and quickly adhesive agent on the disc. The results of mock-up test illustrate that the system provides wind-resistant performance to achieve satisfactorily the structural design criteria of FMIC. In addition, the system is faster, chipper, and easier than the existing system, and is expected that this roofing system can be applied to the rehabilitations of an existing as well as a new building.

• 한국전산구조공학회논문집
• /
• 제23권1호
• /
• pp.27-35
• /
• 2010

본 논문에서는 지진이나 강풍과 같은 동적하중으로부터 구조물을 효과적으로 보호하기 위한 MR 감쇠기 기반의 스마트수동시스템의 제진성능을 파악하였다. 스마트 수동시스템은 MR 감쇠기와 MR 감쇠기의 전력원으로 사용하기 위한 전자기유도(Electromagnetic Induction, EMI)장치를 결합시킨 시스템이다. EMI 장치는 영구자석과 코일로 이루어져 있으며, MR감쇠기와 같이 구조물에 설치되어 구조물의 상대변위에 의해 발생하는 운동에너지를 Faraday의 전자기유도법칙에 따라 전기에너지로 변환시켜 감쇠특성을 변화시키기 위해 MR 감쇠기에 제공하게 된다. 스마트 수동 제어시스템은 기존의 MR 감쇠기 기반 반능동 제진시스템에서 필요로 하는 센서, 제어기, 전원공급장치 등의 피드백 제어시스템을 EMI 장치로 대체함으로써 훨씬 간편하고 설치 및 유지관리가 용이하게 된다. 본 연구에서는 6층 규모의 철골 구조물을 대상으로 다양한 역사지진 하중에 대한 진동대 실험을 통해 스마트 수동 제어시스템의 제진성능을 확인하였다.

• 소음진동
• /
• 제8권6호
• /
• pp.1086-1092
• /
• 1998

This paper presents a general analytical method for analyzing the instability of unbalanced electromagnetic forces produced in induction motors with an eccentric rotor. The equations to be solved are a set of second order differential equations which give matrices with periodic coefficients that are a function of time due to the unbalanced electromagnetic force. The method is based on an extension of the Floquet theory. A transfer matrix over one period of the motion is obtained. and the stability of the system can be determined with the eigenvalues of the matrix. The analysis results of instability zone were coincided upon comparing that of transfer matrix method with that of rotating frame. Two examples are given. including an industrial application. The results show that the method proposed is satisfactory.

• Journal of electromagnetic engineering and science
• /
• 제9권4호
• /
• pp.175-181
• /
• 2009

The measurements were performed to verify experimentally that the voltage arising on a telecommunication line by a power line is due to the induction phenomena because there has been an opinion that the arising voltage on a telecommunication line is not by induction, but by other causality. The voltage appeared on the telecommunication line by way of an electric field or magnetic field generated by the source apparatus that had been artificially made to provide intentional constant high-voltage or current in ELF, that is, 60 Hz as an emulated commercial power.