• 한국표면공학회지
• /
• 제42권1호
• /
• pp.53-57
• /
• 2009

Recovery of heavy-metallic component from a waste solution of factory was undertaken by the solar cell electricity. The solution was obtained from an electrolytic etching process of 316L stainless steel. The electrolysis of the solution for recovery of heavy metallic components was made with platinum plated titanium mesh anode and copper plate cathode. Analysis for the solution and electro-winned materials were made by EDS, XRD and SEM. Iron, chromium, and sulfur components were recovered on the cathode from the solution. Result of EDS analysis for the electro-winned materials revealed that some metal oxide were contained in the recovered material. The recovered materials were expected to have metallic form only by the electrolysis, but metal compounds were contained because of weak solar cell power. Nickel and manganese component in the solution doesn't recovered by this electrolysis process, but they made a sludge with phosphoric acid in the solution.

• 상하수도학회지
• /
• 제30권1호
• /
• pp.69-75
• /
• 2016

This study was conducted to examine the byproducts formation characteristics at the water treatment plants which applying electrolysis as a disinfection process in Gangwondo, Korea. Total of forty plants located in Gangwon Province, Korea were selected for the study. Correlation between dissolved organic carbon(DOC) and $SUVA_{254}$ was not clear. Among the species of the disinfection byproducts(DBPs), chlorate and trihalomethanes(THMs) accounted for 76% and 14% of DBPs, respectively. The effect of DOC or $SUVA_{254}$ on DBPs formation was not clearly demonstrated. The increased amount of THMs due to the raw water bromide content was found primarily in the form of chloroform, and the percent fraction of BDCM(bromodichloromethane) and DBCM(Dibromochloromethnae) was relatively insignificant. When the value of $SUVA_{254}$ was greater than $2L/mg{\cdot}m$, the percent fraction of BDCM and DBCM decreased while percent fraction of CF(chloroform) increased.

• 한국표면공학회지
• /
• 제36권2호
• /
• pp.155-160
• /
• 2003

The effect of the temperature, current density and deposit time on hard chromium deposition in trivalent chromium bath was investigated. Cathode current efficiency increased with increasing current density. Increasing bath temperature from $20^{\circ}C$ to $50^{\circ}C$, chromium deposits were produced in higher current density and the maximum current efficiency was increased. At the plating conditions of $40^{\circ}C$, $30A/dm\m^2$, the deposition thickness increased in proportion to increasing electrolysis time The rate is$ 90\mu\textrm{m}$/hrs. for 2 hours. Microhardness of chromium deposits increased with increasing bath temperature and decreasing current density, and it was constant with electrolysis time. All of bath conditions, microstructure of chromium deposits has nodular structure with some cracking pattern and nodule size increased with increasing deposit thickness.

• 한국표면공학회지
• /
• 제16권1호
• /
• pp.3-9
• /
• 1983

The change of the hardness and yield strength depending upon the electrolysis conditions was investigated for Watts and bright nickel electrodeposits. The hardness of Watts nickel electrodeposits decreased with increasing current density in the range of 1-15A/Am2, while it increased with increasing bath temperature. The hardness of bright nickel deposits increased noticebly in comparison with that of Watts nickel electro-deposits. The hardness and the yield strength of the bright nickel electrodeposits increased considerably with decreasing current density and the highest value was obtained at the lowest current density (1A/dm2), while they decreased noticebly at the bath temperature of 80$^{\circ}C$ in comparison with that of 40-60$^{\circ}C$. The change of the hardness and the yield strength of bright nickel electrodeposits depending upon the electrolysis conditions could be mainly attributed to the variation of organic additives codeposited in the electrodeposits. The recrystallizatioin temperature(50% softening temperature) of the Wattss and the bright nickel electro-deposits was 520-280$^{\circ}C$ and 350-410$^{\circ}C$ respectively and then the recystallization temperature of bright nickel deposits was lower than that of the Watts nickel electrodeposits.

• 대한환경공학회지
• /
• 제32권2호
• /
• pp.149-154
• /
• 2010

전기분해와 공침법을 이용한 해수 중의 납 제거 가능성에 대하여 실험하였다. 전기분해조는 음이온교환수지를 채운 격막으로 분리되었다. 전기분해가 진행됨에 따라 음극식의 pH는 상승하여 콜로이드 형태의 $Mg(OH)_2$와 $CaCO_3$이 생성되었다. 넓은 표면적을 가지는 콜로이드 입자는 납 이온을 흡착하여 침천되었다. 전류밀도를 변화시키면서 바닷물의 전기분해하였으며 바닷물에 남아있는 Mg, Ca, Pb의 양을 적정법과 ASV 방법을 이용하여 측정하였다. 전류밀도와 pH가 증가함에 따라 바닷물 중의 납은 대부분 효과적으로 제거되었다.

• 대한화학회지
• /
• 제53권2호
• /
• pp.159-165
• /
• 2009

2-Amino-5-Substituted-1,3,4-Oxadiazoles의 합성은 비분활된 셀에서 포텐셜 전기분해의 제어하에 백금전극의 세미카바존 전기적 산화로부터 수행되었다. 이것은 유기화학 합성분야에서 환경적으로 양호한 방법이다. 아세트산 및 아세트니트릴, 무수용매와 리튬 과염소산염 이 전기적 산화에서 전기분해을 위하여 사용 되어졌다. 생성물은 IR, $^1H$-NMR, $^{13}C$-NMR 그리고 원소분석을 통해 구조분석 하였다.

• 한국수소및신에너지학회논문집
• /
• 제16권4호
• /
• pp.372-378
• /
• 2005

Ni/YSZ ($Y_2O_3$-stabilized $ZrO_2$) composite powder for a cathode material in high temperature electrolysis(HTE) was synthesized by a mechanical alloying method with Ni and YSZ powder. Microstructure of the composite and cell thickness for HTE reaction has been analyzed with various techniques of XRD, SEM to investigate effects of fabrication conditions. Employing the composite material, furthermore, the unit cell for HTE has been studied to evolve hydrogen from water. XRD patterns showed that the composites after wet mechanical alloying were composed of respective nano-sized crystalline Ni and YSZ. While ethanol as additive for mechanical alloying increased to $20\;{\mu}m$ of average particle size of the composites, alpha-terpineol effectively decreased to sub-micro size of that. This study has been found out the evolution of hydrogen by HTE reaction employing the fabricated cathode material, showing 1.4 ml/min of $H_2$ generation rate as increasing $20\;{\mu}m$ of cathode thickness.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.255-260
• /
• 2016

The health effects of environmental and occupational exposure to steady magnetic fields is a matter of concern. The aim of this study was to evaluate the hematologic effects of exposure to steady magnetic fields at the electrolysis unit of a Copper complex. The population under study was the workers of the electrolysis unit of the copper refinery. The average steady magnetic field in the exposure group was 2.5 mT. The blood indices of workers exposure to steady magnetic fields after adjusting for confounders showed decreased white blood cells (except neutrophils) and increase in the number and volume of platelets. Red blood cells did not show any significant difference. Exposure to steady magnetic fields even in proposed safe limits may have hematologic effects on humans. There is a necessity for more research about the safe doses of exposure to magnetic fields.

• 한국수소및신에너지학회논문집
• /
• 제17권2호
• /
• pp.141-148
• /
• 2006

This study was carried out to analyze the microstructure characteristics of electrolyte membrane through XRD, SEM and AC impedance measurement for using in high temperature steam electrolysis(HTE). It was investigated that thermal stability and electric characteristics by sintering condition using dry and wet process, and confirmed growth of particle and density change by sintering temperature. The sintering temperature and behavior had an effect on the relative density of the ceramic and the average grain size. The more amount of dispersant in organic compound increase, the more the density increased. But the binder was shown opposite phenomenon. It was analyzed that electrolyte resistance and electrical characteristics using AC impedance. The electrical properties of YSZ grain boundary changed with the sintering temperature.

• 전기화학회지
• /
• 제2권4호
• /
• pp.209-212
• /
• 1999

H-형의 분리 셀을 사용하여 중성 및 실온의 온화한 조건에서 조절 전위법 음전극 반응에 의한 nitroarene화합물들의 환원 짝지음 반응으로 높은 수율의 azobenzene유도체를 합성하였다. Pb또는 Pt cathode와 Pt anode를 사용하여 메탄을 용액 하에서 cyclic voltammetry에 근거하여 각 반응의 최적의 반응 조건을 결정한 후 반응을 실행하였으며, 대부분의 경우 환원 짝지음 반응은 치환기의 성질과 위치에 영향을 받지 않고 높은 수율로 성공적인 결과를 얻을 수 있었다.