• Journal of the Korean Applied Science and Technology
• /
• v.16 no.2
• /
• pp.127-133
• /
• 1999

New electroluminescent materials base on anthracene chromophore, [9.10-bis(${\alpha}$-naph -thylethenyl) anthracene (${\alpha}$-BNA)] were newly synthesized. The anthracene derivatives with bulky substituent possessed high melting point and they gave stable amorphous films through vacuum - sublimation methods. Three types of electroluminescent devices were fabricated with double layer and triple layer structure : ITO/TPD/emission layer/MgAg, ITO/emission layer/ OXD-7 and ITO/ TPD/ emission layer/OXD-7/MgAg, respectively. In three types of devices with the emissive layer of ${\alpha}$-BNA, efficient orange electroluminescence was observed. In the triple layer device whit a emitting layer of 20 nm thickness , maximum luminance was about 10000 cd/ $m^2$ at an applied voltage of 10v and maximum external quantum efficiency was 1.0%.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.11C no.2
• /
• pp.37-41
• /
• 2001

In this study, organic electroluminescent devices with the ITO/TPD/Alq$_3$/cathode structure, using various materials of Al, Mg:Ag, Al:Li, MgF$_2$/Al, and LiF/Al as cathodes, were fabricated. We investigated the electrical and optical properties of the devices as follow: current density-voltage(J-V), luminance-voltage(L-V) and luminous efficiency-voltage curves. The bilayer cathodes with LiF/Al and MgF$_2$/Al exhibited better device performance than the other cathodes. It is considered that the improved performance of the organic electroluminescent devices is attributable to the lowering of driving voltage caused by the enhanced electron injection. The alkaline-earth fluorides are desirable materials to improve the performance of the EL devices with the Al cathode, and high luminous efficiency was achieved.

• Polymer(Korea)
• /
• v.24 no.1
• /
• pp.90-96
• /
• 2000

Organic electroluminescent (EL) device was fabricated with Alq$_3$ as an emitting material and PDPMA ultra thin film prepared by Langmuir-Boldgett technique as a polymer hole transport layer. A stable condensed PDPMA monolayer was obtained using arachidic acid as a surface active material. The thickness and absorbance of PDPMA LB film increased line-arly with the layer numbers. The organic multilayered device consisted of ITO/PDPMA LB film (19 layers)/Alq$_3$/Al emitted green light with brightness of 2500 cd/m$^2$ at a DC 14 V Especially, the drive voltage of EL device having PDPMA LB film of 15 layers exhibited the value as low as 4 V. The effects of thickness control and molecular orientation in the PDPMA LB film on EL performance were discussed.

• Journal of the Korean Chemical Society
• /
• v.49 no.2
• /
• pp.233-238
• /
• 2005

• Bulletin of the Korean Chemical Society
• /
• v.23 no.3
• /
• pp.528-530
• /
• 2002

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.147.3-147
• /
• 1998

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.1
• /
• pp.1-4
• /
• 2002

To obtain the blue emission of powder electroluminescent device, the emission properties of ZnS:Cu were estimated by the variation of applied frequency and the addition of dye to ZnS:Cu phosphor. The variation of applied frequency was from 400 to 4kHz and the addition ratio of dye was from 0 to 5 weight percent respectively. The increment of applied frequency made that emission peaks were shifted from 500.5nm and 460nm at 400Hz to 490nm and 450nm at 4kHz. CIE coordinate system was shifted from x=0.1647, y=0.3711 at 400Hz to x=0.1543, y=0.1856 at 4kHz. On the basis of applied voltage 100V, 400Hz, the increment of addition ratio of dye also made that emission peak was shifted from 505nm(0wt%) to 490nm(5wt%) and the CIE coordinate system was shifted from x=0.1647, y=0.3711(0wt%) to x=0.1334, y=0.2363 (5wt%). The brightness was increased from 60 cd/$m^2$(400Hz) to 174 cd/$m^2$(4kHz) with increment of frequency. When the addition ratio of dye was above 1wt%, the brightness was decreased below 42% of initial brightness and changed from 60 cd/$m^2$(0wt%) to 20.84 cd/$m^2$(5wt%).

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.12
• /
• pp.31-36
• /
• 1999

The $Mg._5Zn._5SiN_2:Tb$ and $Mg._5Zn._5SiN_2:Eu$ materials were synthesized and studied to develop new phosphors for thin-film electroluminescent device application. Photoluminescence and cathodoluminescence characteristics of the synthesized phosphors were similar to general emission spectra of Eu, Tb ion, respectively. The CIE color coordinates, threshold voltage and luminance of the $Mg._8Zn._2SiN_2:Eu$ thin-film electroluminescent device fabricated by electron-beam deposition system were x=0.47, y=0.46, 47V, and 23.5 cd/$cm^2$ at 80V, respectively. The capacitance-voltage and charge-voltage characteristics of the thin film electroluminescent devices were also measured.

• Journal of the Semiconductor & Display Technology
• /
• v.5 no.3 s.16
• /
• pp.1-4
• /
• 2006

White-light-emitting ZnS:Mn, Cu, Cl phosphors with spherical shape and the size of $20\;{\mu}m$ are successfully synthesized. They have the double phases of cubic and hexagonal structures. They are applied to electroluminescent (EL) devices by silk screen method with the following structure: $electrode/BaTiO_3$ insulator layer ($50{\sim}60\;{\mu}m$)/ ZnS:Mn, Cu, Cl phosphor layer ($30{\sim}50\;{\mu}m$)/ITO glass. The EL devices are driven with the voltage of 100 V and the frequency of 400 Hz. The EL devices show the three emission peaks. The blue and green emission bands are originated from $CICu^{2+}$ transition and $ClCu^+$ transition, respectively. The yellow emission band results from $^4T^6A$ transition of $Mn^{2+}$ ion. As an increase of Cu concentrations, the blue and green emission intensities decrease whereas the yellow emission intensity increases; the quality becomes warm white. It is due to the energy transfer from the blue and green bands to the yellow band.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1093-1095
• /
• 2006

An orange-emitting phosphor for inorganic electroluminescent device has been studied. Cu and Cl were co-doped in Mn-doped ZnS for a high-performing phosphor. The effect of $Mn^{2+}-doping$ concentration as well as $Mg^{2+}-sensitizer$ addition on the luminescence characteristics has been investigated.