• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.12a
• /
• pp.114-118
• /
• 2006

We investigated the transient electroluminescence (EL) and modulation characteristics of red organic light-emitting diodes (OLEDs), which consist with 4-(dicyanomethylene)-2-i -propyl-6-(1,1,7,7-tetramethyljulolidyl-9-cnyl)-4H-pyran (DCJTI) and rubrene doped into tris(8-hydroxyquinoline)aluminum ($Alq_3$). The transient EL waveforms showed two components, the overshooting peak and constant component, indicating that the excess amount of accumulated charges simultaneously recombine at the onset moment. This overshooting effect reduced the rise time of transient EL and enhanced the optical output of OLEDs when the pulse voltage applied to the device. We demonstrated that the red OLEDs could be use for the high-speed switching application by driving at more than 100 MHz and transmitting the video signals utilized as the electro-optical conversion device

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.943-946
• /
• 2001

In this study, We have investigated degradation effects of blue organic electroluminescence devices that was consisted of TPD(N,N'-dyphenyl-N-N\`-bis(3-methyphenyl) as hole transport layer and Butyl-PBD (2- (4-Biphenylyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole)-as emission layer and electron transport layer. We have studied characteristics of brightness and current density about blue OEL that was degradated layer. Two kinds of samples that were fabricated each continuous and non-continuous method was used.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.53-56
• /
• 2002

Today, interest in electroluminescent(EL) diodes has been increasing since vacuum-sublimed thin-film dioes exhibited high performance. And since the discovery of electroluminescence from aluminaqinone, which has uniform $\pi$-conjugated segment by Eastmann kodack,$^1$ lots of attentions have been concentrated on organic EL devices. However, they have disadvantage such as low mechanical intensity, thermic crystallization. (omitted)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.68-68
• /
• 2010

Electroluminescence (EL) characteristics of green-emission ZnS:Cu,Cl-based ac-type inorganic powder electroluminescent structures were examined by inserting carbon nanotubes (CNTs) into or next to the dielectric layer. For the top-emission type EL structure, where the luminescent light was emitted from the top of the structure, was fabricated by assembling in order, a top electrode, an emitting layer, a dielectric layer, and a bottom electrode from the top. $BaTiO_3$ powder mixed with CNTs was used as a dielectric layer or CNTs were deposited between the bottom electrode and $BaTiO_3$ dielectric layer in order to improve the role of the dielectric layer in the structure. Luminance of an EL structure with CNTs inclusion was greatly enhanced possibly due to the high dielectric constant in the dielectric layer of $BaTiO_3$/CNTs, which is one of hot research topics utilizing nano-objects for intensifying dielectric constant and reducing dielectric loss at the same time. A variation on the CNTs themselves and their inclusion methods in the dielectric layer has been exhorted, and the underlying mechanism for the role of CNTs in the EL structure will be explained in the poster. In order to extend the flexibility of EL devices, EL devices were fabricated on the paper substrate and their performance was compared other EL devices on the plastic-based substrate.

• Journal of the Korean Applied Science and Technology
• /
• v.16 no.1
• /
• pp.41-44
• /
• 1999

Recently, high luminance and efficiency were realize in organic thin film electroluminescence (EL) cells with multilayer structures including an emitting layer (EML), hole transporting layer (HTL), and an electron transporting layer (ETL). In this study, Bis(10-hydroxybenzo[h]quinolinato)beryllium (Bebq2) was synthesized. PL and EL characteristics of their thin film were investigated by fabricating the devices having a structure of ITO/PVK/Bebq2/Al, ITO/PVK dispersed with TPD/Bebq2/Al. The EL color of these device was greenish and the wavelength of their EL peaks was located, respectly, at 495nm, and 492.5nm.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.9
• /
• pp.762-767
• /
• 2001

We report the white light emission from the multilayer organic electroluminescent(EL) device using exciplex emission. The exciplex at 500nm originated between poly(N-vinylcarvazole)(PVK) and 2,5-bis(5'-tert-butyl-2-benzoxazoly)thiophene(BBOT) and exciplex of 50nm originated from N,N'-diphenyl-N,N'-(3-methyphenyl)-1,1'-biphenyl-4,4'-diamine(TPD) and BBOT were observed. Also, the energy transfer from PVK to BBOT and poly(3-hexylthiophene)(P3HT) in mixed emitting materials was occurred. The electroluminescence(EL) spectra of organic EL device which have a device structure of ITO/CuPc(5nm)/emitting layer(100nm)/BBOT(30nm)/LiF(1.4nm)/Al(200nm) were slightly changed as a function of the applied voltage. The luminance fo 12.3 ${\mu}$W/$\textrm{cm}^2$ was achieved at 20V and EL spectrum measured at 20V corresponds to Commission Internationale de L\`Eclairage(CIE) coordinates of x=0.29 and y=0.353.

• Electrical & Electronic Materials
• /
• v.8 no.6
• /
• pp.752-758
• /
• 1995

Red emitting CaS:Eu,S electroluminescent(EL) device prepared at 550.deg. C by an electron-beam evaporation technique, demonstrated luminance of 175cd/m$\^$2/ and efficiency of 0.311m/W with 3kHz drive. Luminance was increased with the increase of applied voltage and frequency. From the results of the PL spectrum and the EL spectrum, the CaS:Eu, S device showed emission peak near 640nm resulted from the transition of EU$\^$2+/ 4f$\^$6/5d.rarw.4f$\^$7/. The capacitance of the phosphor layer from the Sawyer-Tower circuit was 10.5nF/cm$\^$2/.

• Journal of the Korean Chemical Society
• /
• v.49 no.2
• /
• pp.233-238
• /
• 2005

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.07a
• /
• pp.174-175
• /
• 2004

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.320-321
• /
• 2000

전기장 발광현상(Electroluminescence, 이하 EL)은 1936년 Destriau$^{[1]}$ 가 ZnS:Cu 분말에서 처음 전기장 발광현상을 발견한 이래 TFEL(Thin Film EL)소자의 구동전압을 감소시키는 문제는 ACTFEL(Alternating Current Thin Film EL)소자의 개발이후 계속적인 관심의 대상이 되어왔다. TFEL 소자는 전기적으로 용량소자이므로 전기장 인가시 각 층의 정전용량의 역수에 비례하는 전압이 분배되므로 동일한 조건의 형광막 사용시 소자의 구동전압을 낮추기 위해서는 절연박막의 두께를 줄이는 방법과 유전율이 높은 물질을 사용하는 방법이 있으나, 전자의 경우에는 박막의 결함이 생기기 쉬워 한계가 있기 때문에 고유전율 특성을 갖는 새로운 물질을 개발하는 것이 바람직하다. Ta$_2$O$_{5}$ 박막의 경우 작은 누설전류 특성과 고유전율 특성으로 인해 고집적을 요하는 반도체 분야에서 많은 연구가 진행되어 왔다. 또한 EL소자 응용시 효율면에서 우수한 특성이 기대되며, 특히 수분에 강한 특성을 가지고 있어 EL소자의 안정성이 예견되는 바이다. 본 연구에서는 Ta$_2$O$_{5}$ 박막의 산소 결핍에 따른 전기적 특성에 대해 연구하였고 Ta$_2$O$_{5}$ 박막을 이용한 저전압에서 구동가능한 전기장 발광소자를 제작하여 전기광학적 특성에 대해 연구하였다. (중략