• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1998년도 학술발표회논문집
• /
• pp.9-11
• /
• 1998

A phenomenon of electroluminescent radiate as electric field applied in the phosphor, in this paper, we produced the Powder Electroluminescent Device(PELD) which was changing the structure and the thickness of phosphor and insulator for realization of the PELD with high brightness. We made PELD with structure that is WK-1(ITO film/Phosphor/Insulator/Electrode), WK-2(ITO film/Phosphor/Insulator/Electro de), WK-3(ITO film/Phosphor/Insulator/Electrode), WK-4(ITO film/Phosphor+Insulator/ Electrode). The property of the produced PELD are analyzed by measuring the spectrum which electrical and optical property, the brightness and the transferred charge density. In this result, the structure of WK-4 have good luminescence property than others, it's effective thickness is 60${\mu}{\textrm}{m}$. At 100V 400Hz, High brightness of 2700cd/m2 was performed.

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.924-930
• /
• 1998

In this study, we describe the properties of an electro-optical modulator with CPW(coplanar waveguide) electrode fabricated on $LiNvO_3$ optical waveguide, that is applicable to optical communications. These optical modulators have features that use a buffer layer to reduce velocity mismatch between microwaves and optical wave as well as employ CPW to improve impedance and propagation mode mismatch between the electrode and the external circuits. And an annealed proton exchange technique for obtaining low-loss optical waveguides and good reproducibility was employed. Taking into consideration the mentioned background, to achieve the lower driving voltage of optical modulator, we have re-disigned the longer interaction length. And their device properties are discussed also. As a result, fabricated optical modulators of good 10Gps operation and low voltage(5.6V of the halfwave lengfth voltage) at an $1.5{\mu}m$ wavelength are achived with good reproducibility.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.316-316
• /
• 2008

Using an evaporation method, $SiO_2$ was deposited as a buffer layer between a flexible PET substrate and a ITO film deposited by DC magnetron sputtering and electro-optical properties were investigated with thickness variance of $SiO_2$ layers. After coating a $SiO_2$ layer and a ITO film, the ITO/$SiO_2$/PET was heated up to $200^{\circ}C$ and the resistivity and the transmittance were measured by hall effect measurement system and UV/VIS/NIR spectroscopy. As a result of depositing a $SiO_2$ buffer layer, the resistivity increased and the transmittance and adhesion property were enhanced than ITO films with no buffer layers and the resistivity was lowered as $SiO_2$ thickness increased from 50 $\AA$ to 100 $\AA$. It was found that the transmittance was independent of annealing temperature variance in $150^{\circ}C{\sim}200^{\circ}C$ and the resistivity decreased as the temperature increased and especially decreasing rate of the resistivity was higher as the buffer layer thickness was thinner. So under optimized depositing of $SiO_2$ buffer layers and post-annealing of ITO/$SiO_2$/PET, ITO films with enhanced adhesion, electro-optical properties can obtained.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.124-127
• /
• 2002

LC aligning capabilities and the variation of pretilt angles with ion beam irradiation on the a-C:H thin films, and electro-optical (EO) performances of the ion beam aligned twisted nematic (TN)-liquid crystal display (LCD) with oblique ion beam exposure on the a-C:H thin film were studied. A high pretilt angle of $3.5{^{\circ}}$ via ion beam irradiation on the a-C:H thin film was measured. Also, the LC pretilt angle decreased due to the increase in surface roughness at over 2 min of IB exposure time. It is considered that this roughness increase due to increasing IB exposure time that generated destroy of oriented rings of atoms related to LC alignment. An excellent voltage-transmittance (V-T) curve of the ion beam aligned TN-LCD was observed with oblique ion beam exposure on the a-C:H thin film for 1 min. Also, a faster response time for the ion beam aligned TN-LCD with oblique ion beam exposure on the a-C:H thin film for 1 min can be achieved. Finally, the residual DC property of the ion beam aligned TN-LCD with ion beam exposure of 1 min on the a-C:H thin film is almost same as that of the rubbing aligned TN-LCD on a PI surface.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1043-1046
• /
• 2003

We investigated the EO performances of the UV aligned twisted nematic liquid crystal display (TN-LCD) with the UV exposure on a-C:H thin film surface. LC alignment using UV exposure on the a-C:H thin film surface was achieved. Monodomain alignment of the UV aligned TN-LCD can be observed. An good EO characteristics of the UV aligned TN-LCD was observed with oblique ion beam exposure on the a-C:H thin film surface. Therefore, the EO property of the UV-aligned TN-LCD with UV exposure on the a-C:H thin film surface is almost the same as that of the rubbing-aligned TN-LCD on a polyimide (PI) surface.

• 한국측량학회지
• /
• 제16권1호
• /
• pp.1-7
• /
• 1998

SAR 영상은 기상이나 일조량에 관계없이 자료를 취득할 수 있으므로 종래의 전자광학적 감지기가 갖는 제약을 극복할 수 있다. 또한, SAR 영상으로 취득할 수 있는 정보는 종래의 광학적 감지기에 의한 것과는 다른 형태이므로 영상에 의한 정보취득의 범위를 확대시킬 수 있다. 그러나, SAR 영상에는 레이다의 특성과 대상물의 기하학적 특성에 따라 다양한 왜곡이 포함되므로, SAR 영상으로부터 정보를 취득하는 데 있어서 소요 정확도가 확보되기 위해서는 SAR 자료에 포함되어 있는 왜곡을 보정하여야 한다. 본 연구에서는 SAR 영상 취득시 대상물과 안테나의 기하학적 구성에 따른 반사파의 변화를 모형화하여 SAR 영상을 모의제작하고, 이를 이용해 대상물의 경사에 따른 밝기값의 왜곡을 실제 영상에서 제거하므로서 SAR 영상의 기하학적 복사 왜곡을 보정하고자 하였다. 그 결과, SAR 영상으로부터 대상물의 반사특성에 따른 정상적 정보를 취득함에 있어서 기하학적 복사왜곡에 의한 영향을 최소화하여 지형공간정보 관련 분야에서 SAR 영상을 원활히 활용할 수 있도록 기여하고자 하였다.

• 한국태양에너지학회 논문집
• /
• 제34권4호
• /
• pp.39-44
• /
• 2014

The elemental composition of electro-deposited black Cr solar selective coatings before and after heating in air by using secondary ion mass spectrometry (SIMS) was investigated for optical property analysis. In addition, black Cr selective coating exposed by solar radiation for 5 months was compared with heated sample. SIMS investigation shows that $OH^+$ bearing ions were related to a near surface region of CrOH and CrO compound. The optical degradation of this coating after heating at $500^{\circ}C$ reveals that diffusion of the Cu and Ni elements in substrate material, the chemical interactions adjacent to the interface, and the interface width broadening.

• Bulletin of the Korean Chemical Society
• /
• 제19권11호
• /
• pp.1165-1168
• /
• 1998

2-Tetrahydropyranyl methacrylate with a self-crosslinkable moiety was copolymerized with methyl methacrylate and 4-[(2-methacryloxyethyl)methylamino]-4'-nitrostilbene or 4-[(2-methacryloxyethyl)ethylamino]-4'nitroazobenzene to provide second-order nonlinear optical property. Glass transition temperatures (Tg of the copolymers are around 140 ℃. The copolymers were soluble in common organic solvents such as tetrahydrofuran (THF), cyclohexanone, and N,N-dimethylformamide (DMF). Poling was carried out at 140 ℃ for 20 min and identified with UV-Vis spectroscopy. Electro-optic coefficient (r33) of copolymer was 62 pm/V for polymer 2 at 633 nm, and relaxation did not remarkably occur due to the formation of a crosslinked network at 200 ℃ for 15 min.

• 한국정보전자통신기술학회논문지
• /
• 제16권2호
• /
• pp.109-115
• /
• 2023

본 논문은 UV(ultraviolet) 처리된 자기 조립 단분자막(fluorinated self-assembled monolayers; FSAM)을 배향막으로 사용한 액정의 배향 특성을 분석하였다. 물리화학적 분석을 사용하여 UV 처리 전후의 ITO(indium-tin-oxide) 유리 기판의 FSAM 특성을 확인하였다. FSAM 표면은 UV 처리에 의해 소수성에서 친수성으로 변화하였다. LC(liquid crystal) 분자는 UV 처리된 FSAM 표면에서 수평방향으로 정렬되었고 선경사각도 90°에서 0°로 변화하였다. UV 처리된 FSAM을 배향막으로 사용하여 제작된 TN(twist nematic) 셀의 전기광학(electro optics; EO) 특성은 기존의 PI(polyimide) 배향막에 비해 응답 시간이 빠른 것을 확인하였다. 이는 UV 처리된 FSAM 이 LCD(liquid crystal display)의 기존 폴리이미드 배향막을 대체할 잠재적인 가능성을 가진다.

• 한국항공우주학회지
• /
• 제38권12호
• /
• pp.1232-1239
• /
• 2010

(주)쎄트렉아이는 지구관측위성의 주 탑재체로 사용될 고해상도 전자광학카메라, EOS-C Ver.3.0을 개발 중이다. EOS-C Ver.3.0은 현재 운용중인 DubaiSat-1의 주 탑재체인 EOS-C Ver.2.0 개발 경험을 바탕으로 능동 열제어 방식과 수동 열제어 방식을 적절하게 혼용하여 보다 향상된 성능을 갖도록 설계되었다. 설계를 바탕으로 STM을 개발하여 인증(qualification) 수준의 열진공 시험을 수행하여 설계 여유(design margin)를 확인하였다. 또한 열평형 시험 결과를 이용하여 열제어계 설계에 사용한 열-수치 모델에 대한 검증 작업을 수행하였으며, 열-수치 모델이 실제 열적 특성을 잘 모사하고 있음을 확인하였다.