• Ceramist
• /
• v.10 no.3
• /
• pp.15-27
• /
• 2007

Fabrication and electro-optic applications of glass optical fibers were reviewed. Theoretical description on the electro-optic Kerr effect in glass optical fibers, particularly for the second-order optical nonlinearity was given. Fabrication procedure and the characterization of the nonlinear electro-optic fibers with internal electrodes were described. Several electro-optic devices based on the polarimetric cells made by the nonlinear optical fibers with internal electrodes were also discussed with the experimental results on the electro-optic effect.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.3
• /
• pp.184-188
• /
• 2014

The electro-optic properties in Langmuir Blodgett films of poly (vinylidene fluoride trifluoroethylene) are investigated in the crossover region between two and three dimensions. The absence of finite size effect is observed in the films thinner than 20 nm, which confirms that these films are two dimensional ferroelectrics. The copolymer LB film of P(VDF-TrFE) exhibits the largest electro-optic response(26 pm/V) at 10 layer thickness. The cross-over behavior of electro-optic effect around the 10 layer thickness was discussed with the formation of nanomesa after thermal annealing.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1929-1931
• /
• 1996

In this work, it is proposed new PD(partial discharge) detection technique using electro-optic effect, for which partial discharges generated from needle-plane electrode in air were detected through optical measuring system by use of $LiNbO3_3$ electro-optic crystal. As a result, it is noticed that PD measurable phase intervals are limited by the asymmetrical D-E hysteresis loop of the crystal with defects and half-wave voltage. However, both number of measured PD pulses and their amplitude were increased with applied voltage, which likely implies that it is possible to detect PD through newly proposed electro-optic method.

• Macromolecular Research
• /
• v.12 no.5
• /
• pp.484-489
• /
• 2004

We have prepared a phenothiazine-based nonlinear optical (NLO) chromophore that displays a fairly high microscopic nonlinearity through intramolecular charge transfer. The phenothiazine unit plays important roles of contributing its high electron donating ability and connecting the resonance pathway through a conjugative effect in the cyclized ring adjacent to the aromatic ring. Theoretical calculations and an absorption spectroscopic study provided useful information concerning the microscopic nonlinearity of the chromophores. We investigated the electro-optic (EO) properties of the guest-host systems in amorphous polycarbonate containing the synthesized chromophores at different concentrations under different poling temperatures. A real-time pole and probe method provided a much greater amount of information regarding how the EO properties can arise and how they can be optimized.

• Korean Journal of Optics and Photonics
• /
• v.9 no.4
• /
• pp.215-220
• /
• 1998

We proposed an in situ measurement set-up and technique to measure the various electro-optic(E-O) properties of the E-O polymer. Using the proposed measurement set-up, the electro-optic effect and birefringence of unpoled side-chain E-O polymer induced by the strong dc and ac electric field were observed. The dependence of the E-O coefficients on the various poling conditions were measured with real time. To evaluate the thermal stability of the poled polymer the relaxation of the E-O effect was measured and the result was compared with well known polymer materials. The proposed measurement reduces the number of experimental steps and saves measurement time.

• Macromolecular Research
• /
• v.14 no.6
• /
• pp.603-609
• /
• 2006

Tricyanopyrrolidene chromophores were prepared in order to compare their macroscopic nonlinear optical (NLO) properties with a conjugated structure through the long molecular axis. A thiophene or phenyl ring was tethered to an ethylenic bond; it may act as a lateral moiety to disrupt the planarity of a chromophore and lessen the electrostatic interaction. Thin film composites of these chromophores dissolved in amorphous polycarbonate (APC) were fabricated. Real time pole and probe method was employed to investigate the change of electro-optic (EO) signal during poling. The EO properties and their relaxation behaviors of the guest-host systems containing newly synthesized chromophores were investigated in detail.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.326-329
• /
• 1999

In this paper, we demonstrate a polarization independent optical phase modulator using electro-optic polymer, P2ANS. To overcome the intrinsic polarization dependency of electro-optic effect, we control the optic axis using a new electrode structure. P2ANS(42:75) and P2ANS(25:75) are used for the core layer and the cladding layer, respectively. The buried-type single mode waveguide is fabricated by oxygen ion reactive etching and electic poling is performed by applying 1, 200V at 135$^{\circ}C$. The measured V$_{\pi}$ of the device for both TE and TM modes are 70V.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.160-160
• /
• 2009

In recent years, the merging of nanomaterials and nano-technology into electro-optic (EO) device technology such as liquid crystal displays (LCDs) has attracted much attention because of their unique electro- and magneto-optic properties and novel display applications. One example of hybrid LC-inorganic systems is semiconductor nanorods added to LC for their strong reorientation effect and tunable refractive index. Doping of nanoparticles in LC or polymers can lead to changes in performance characteristics such as electro-optical, dielectric, memory effect, phase behavior, etc. Due to the tunability of LCDs with mixed inorganic materials, low voltage operation of a LC system can also be achieved using the significant electro-optical effect achieved through suspension of ferroelectric nanoparticles in NLC.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.269-273
• /
• 1990

The proton conserving effect of diffusion with self-aligned SiO2-cladding is investigated by infrared transmission spectra. Based on the proton conserving effect, proton-diffused channel waveguides with self-aligned SiO2-cladding substrates. And an electro-optic cutoff modulator with self aligned electrode that utilizes a single-mode proton-diffused channel waveguide in a Y-cut XX-propagating LiNbO3 substrate is fabricated. Over 20 dB extinction has been achieved with applied voltage of 15V.

• Journal of Sensor Science and Technology
• /
• v.31 no.4
• /
• pp.194-213
• /
• 2022

This study comprehensively reviewed four types of integrated-optic electric-field sensors based on titanium diffused lithium-niobate waveguides: symmetric and asymmetric Mach-Zehnder interferometers, 1×2 directional couplers, and Y-fed balanced-bridge Mach-Zehnder interferometers. First, we briefly explain the crystal properties and electro-optic effect of lithium niobate and the waveguide fabrication process. We theoretically analyzed the key parameters and operating principles of each sensor and antennas. We also describe and compare the design, simulation, implementation, and performance tests: dc and ac characteristics, frequency response, dynamic range, and sensitivity. The experimental results revealed that the sensitivity of the sensor based on the Y-fed balanced bridge Mach-Zehnder interferometer (YBB-MZI) was higher than that of the other types of sensors.