• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3506-3511
• /
• 2007

The energy harvesting using smart materials has been extensively investigated to supply electric power to wireless sensor systems. In this paper, the energy harvesting using eddy current was studied with the integrated magnetic cantilever beam system. If a large conductive metal plate moves through a magnetic field which intersects perpendicularly to the sheet, the magnetic field will induce small rings of current which will actually create internal magnetic fields opposing the change. This eddy current that was induced in the coiled conductive sheet from the mechanical vibration was converted to chemical energy by charging batteries. The experimental results show that the eddy current generated the electric power up to max 31.2mW. Additionally the vibration reduction of the mechanical cantilever beam was observed by the energy dissipation in the electro-magnetic coupled system. The present result shows that the vibration level of the first natural frequency was reduced up to 7.7dB

• 한국재료학회지
• /
• 제11권11호
• /
• pp.941-946
• /
• 2001

Conductive microspheres with a density of 0.2 g/cc were fabricated by electroless silver plating for application to the light-weighted microwave absorbers. The silver plating was conducted with the variation of plating conditions (sensitizing condition, $AgNO_3$, concentration, amount of reducing agent). Specimens have very low electro-resistivity. Under an optimum processing condition, conductive microspheres with uniform silver plating layer can be produced. Rubber-sphere composites were fabricated and their microwave absorbing properties were measured by HP8722D Network Analyzer. It was found that the lower the electrical resistance of microsphere, the better the microwave absorbing properties. Feasibility of microwave absorbers using this microspheres can be demonstrated with the result of microwave reflection loss of -15 dB and thickness of 1.44 mm.

• 전기학회논문지P
• /
• 제59권2호
• /
• pp.238-244
• /
• 2010

In this paper, we studied electrical characteristics of internal converter type of LED lamps for road and street lighting. We surveyed electro-technical regulations and KS(Korean industrial standards) about LED luminairs. Waveforms of voltage and current, thermal distributions, insulation resistances between live parts and exposed conductive parts, and flame test of cover of LED lamps were experimented and analyzed. In regulations, insulation resistance between live conductors and exposed conductive parts should be greater than $0.2M{\Omega}$ in case nominal voltage of wiring is 220V. In KS codes, the value of insulation resistance should be greater than $2M{\Omega}$ while applying DC 500V or DC 100V. In the result of this study, waveforms of primary voltage and current were distorted. There was difference in waveforms of secondary voltage and current according to composition of converter. Mostly, insulation resistances were measured high more than regulation and code value but some measured points were measured badly($0.0M{\Omega}$). Cover of LED lamps was ignited easily. We expect that the results of this study would be helpful for revision of regulations and national codes for the electrical safety of LED road and street lighting.

• 마이크로전자및패키징학회지
• /
• 제18권3호
• /
• pp.33-37
• /
• 2011

본 연구에서는 Ag-에폭시계 도전성접착제와 Sn도금 부품의 접합체를 이용하여 고온 고습 분위기($85^{\circ}C$/85%RH) 중에서의 미세조직과 전기저항의 변화를 중심으로 계면열화에 미치는 Cl의 영향을 검토하였다. $85^{\circ}C$/85%RH 분위기에서 전형적인 Cl량이 함유된 Ag-에폭시계 도전성접착제를 사용한 접합체의 전기저항은 Cl 함유량이 적은 접합제를 사용한 접합체에 비해 시간의 경과에 따라 급격히 증가하는 경향을 나타내었다. 그 원인을 밝히기 위해 미세조직을 분석한 결과, 고Cl 접합체의 경우, Sn 산화물과 Sn-Cl-O가 Sn도금/Ag-에폭시계 도전성접착제의 계면에 불균일하게 생성되어 있는 반면, 저Cl 접합체에서는 Sn-Cl-O생성이 관찰되지 않았고, Sn산화물도 비교적 적은 것을 알았다. 이러한 결과들을 통해 Ag-에폭시계 도전성접착제에 함유된 Cl이 Ag-에폭시계 도전성접착제와 Sn도금 부품 접합체의 전기적 열화를 가속시키는 원인 중의 하나임을 알았다.

• 한국기계가공학회지
• /
• 제15권6호
• /
• pp.122-128
• /
• 2016

The Biosensor biosensor pattern was developed by via an EHD (electro-hydro-dynamics (EHD) patterning process that was performed under atmospheric pressure at room temperature in a single step. The drop diameter was smaller than nozzle diameter and applied high viscosity conductive ink was applied in the EHD patterning method to provide a clear advantage over the piezo and thermal inkjet printing techniques. The Biosensor's biosensor's micro electrode pattern was printed by via a continuous EHD patterning method using 3three- type types of control parameters parameter (input voltage, patterning speed, nozzle pressure). High viscosity (1000 cps) conductive ink with 75 wt% of silver nanoparticles was used for experimentation. The incremental result of impedance of biosensor impedance was measured between the antibody ($10ug{\mu}g/ml$) to spore (0.1 ng/ml, 10 ng/ml, and $1ug{\mu}g./ml$) reaction at frequency 493 MHz frequency.

• 한국재료학회지
• /
• 제16권6호
• /
• pp.386-393
• /
• 2006

Increasing environmental concerns require to solve the problem produced due to the use of heavy metals in coating formulations. Therefore, it is necessary to develop new coating strategy employing inherently conducting polymers such as polyaniline. Polyaniline is a conductive polymer that is synthesized by oxidation polymerization, and the electrochemical and chemical polymerization are possible for the oxidation of aniline. Electrochemical oxidation polymerization produces a fine surface and although voltage control is more convenient, it require electrolytic cells, and elaborate thin film can be acquired with the polymerization. Polyaniline films were electro-polymerized on cold rolled sheets using the galvanostat mode in the oxalic acidaniline-sodium molybdate electrolyte. The structure and properties of polyaniline film were studied using Potentiostat/Galvanostat 263A, FE-SEM,, AFM, SST, Colorimetry. A high corrosion resistance of polyaniline film was observed with an increase of corrosion potential by $500{\sim}600$ mV for the substrate covered with polyaniline.

• 한국항공우주학회지
• /
• 제35권12호
• /
• pp.1115-1120
• /
• 2007

본 논문은 기둥 구조의 전극이 내부에 존재하는 노즐을 이용한 정전 분무 마이크로 추진 장치의 새로운 메커니즘을 제시하였다. 기둥 구조의 노즐로 인한 제팅의 효율 증진을 수치적 및 실험적으로 연구하였다. 노즐 상부에 존재하는 전극에 인가된 전압으로 인하여 액면에 형성된 전기장은 액체의 분무를 가능하게 하며 기둥 구조의 전극은 액면의 중앙 부분에 전기장이 집중되도록 하여 제팅을 효율적으로 할 수 있게 하였다. 또한 노즐 크기에 따른 필요한 인가전압의 차이에 대한 연구를 수행하였으며 본 연구로부터 수 마이크로미터의 노즐에 대해서 500V 이하의 전압에서 구동이 가능함을 보였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.762-765
• /
• 2003

에틸렌글리콜(ethyleneglycol)을 이용한 폴리비닐에테르(polyvinyl ether)와 같은 고분자물질을 활용하여 Co$^{30}$ 방사선원으로부터 ${\gamma}$선을 조사시켜, 고분자 물질의 성질을 변화시킴으로써 화학, 전기전자, 환경 및 기타 여러 가지 응용분야에 적용하여 이용할 수 있는 기술을 개발하였다. 이를 바탕으로 관련재료의 단량체(monomer)로부터 중합체(polymer)를 합성하여 water swelling을 시키는 과정에서 각종 (금속) 이온을 흡입-제거하는 방법의 환경복원기술, 흡입 금속이온을 표면에 밀집시켜 금속막을 형성하는 응용기술, 생체조직의 대용물질로 활용하는 의용공학 및 열감지특성(thermal sensitive property) 또는 pH 감지특성(pH sensitive property)을 이용하여 의용기술에 적용하는 polymer 응용기술 등의 폭넓은 활용을 위하여 그 일환으로 전도성 고분자 제조기술로의 활용가능성을 연구하였다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.83-84
• /
• 2006

In aqueous phase, we directly prepared conducting and photoluminescent nano-structured particles by oxidation polymerization. Thiophene(PT) was initiated by $FeCl_{3}/H_{2}O_{2}$ (catalyst/oxidant) combination system. And, polydispersed core-shell poly(styrene/thiophene) and polyaniline(PANI)-coated multi core-shell polystyrene latex particles were successfully prepared by oxidative and radical polymerization. The resulting latex particles have fine improved luminescence and conductive efficiency and dispersion state due to the PT and PANI shell. Hyper functionalized nanoparticle would be expected to increase the processibility in various electrical and electro-optical fields.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1432-1435
• /
• 2006

We report on carbon nano-fibers (CNFs) for applying to epoxy as a highly thermal conductive adhesive. In order to fabricate CNFs, electro-spinning process was performed with polyacrylonitrile (PAN) solutions. The sample was stabilized at the annealing temperature of $360^{\circ}C$, and carbonized from 900 to $1100^{\circ}C$. It is shown that the synthesized CNFs have a good thermal conductivity of several hundred W/m K. LED backlight units (BLUs) fabricated with MPCB using CNF-mixed epoxy give a better heat dissipation and higher performance than normal LED BLUs. On the basis of SEM, XRD, and FTIR, the characteristics of CNFs are described.