• Proceedings of the Optical Society of Korea Conference
• /
• 1996.09a
• /
• pp.32-32
• /
• 1996

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1968-1973
• /
• 2013

We present the enhancement of narrowband modulation response of an optical source by integrating a dual-electrode distributed feedback (DFB) laser with an electro-absorption modulator (EAM). The dual-electrode DFB laser exhibits a multiple optical modes owing to a self-pulsation in GHz range. By modulating the laser and modulator sections of the integrated device simultaneously, 20-dB of narrowband modulation response enhancement at 6 GHz with 7-GHz tuning range has been observed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.4
• /
• pp.41-47
• /
• 2004

In this paper, we analyze the microwave characteristics of traveling-wave electro-absorption modulator (TW-EAM) considering the microwave feedline and the impedance mismatch. The TW-EAM is analyzed by using the equivalent circuit model. The capacitance and the inductance of the equivalent circuit are evaluated by using 3-dimensional finite difference time domain (FDTD) method, while the microwave feedline is analyzed by momentum method. In a viewpoint of microwave characteristics, we present the effect of the structure and the length of microwave feedline.

• Journal of the Optical Society of Korea
• /
• v.19 no.4
• /
• pp.371-375
• /
• 2015

The impact of equivalent optical bandwidth on the performance of a system using a reflective electroabsorption modulator (R-EAM) based optical source has been experimentally evaluated with signals operating at 2.5 Gb/s and beyond. The equivalent optical bandwidth of our source with a broadband seed light was simply adjusted by using a bandwidth tunable optical filter. From the measurements, we have estimated the required equivalent optical bandwidth of our source for an error-free transmission (@ bit-error-rate of $10^{-12}$) and a forward error correction (FEC) threshold of $2{\times}10^{-4}$.

• ETRI Journal
• /
• v.28 no.3
• /
• pp.393-396
• /
• 2006

This letter proposes a new impedance matching scheme of a traveling wave electro-absorption modulator (TWEAM) module for a 60 GHz band radio-over-fiber (ROF) link. A microstrip band pass filter (BPF) was used to achieve impedance matching at the 60 GHz band, and termination resistance was carefully designed to obtain an input impedance close to $50\;{\Omega}$. Also, a bias circuit for the device was designed in the module. The measured return loss and frequency response show that the modulator module observes the characteristics of a filter without the need of a further tuning process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.63-64
• /
• 2006

Recently, researches for high-speed optical devices have been increased to provide mass data transmission and high-speed optical communication. Optical modulator in the transmission link is one of the crucial devices in total optical network system and it can affect a great effect to the whole transmission properties. In this paper, traveling wave electro-absorption modulator (TWEAM) is examined to ensure high efficiency in the RF range and wide bandwidth. In addition, the temperature-dependence electrical characteristics of TWEAM is investigated. Temperature dependent property variations were characterized using I-V and C-V measurement.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.150-151
• /
• 2002

파장 분할 다중화(Wavelength division multiplexing ： WDM) 광전송 장치의 용량확대를 위한 방안으로 여러 가지 방법들이 연구 개발되고 있으며, 최근 들어 테라 급(Tb/s) 광전송 연구 결과들이 발표되고 있다. 이러한 장거리 광전송 장치의 광송신기는 LiNbO$_3$ 마하-젠더(Mach-Zehnder) 간섭계형 외부 변조기를 주로 사용하고 있다. 한편 반도체 레이저 집적된 전계 흡수형 변조기(Electro-absorption modulator integrated laser ： EML)를 이용한 외부 변조 방식 적용을 위해서 여러 연구소 및 기업체에서는 40Gb/s의 성능을 지닌 EML의 개발 결과들을 발표하고 있다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.40-47
• /
• 2001

The structural dependence of the performance of an 1.55 $1.55{\mu}m$ InGaAsPIInGaAsP MQW electro-absorption modulator for highspeed digital fiber communication was systematically investigated. The effects of n-doped SCH region length $t_n$ as well as the general structure parameters including quantum well number $N_w$, well-thickness $t_w$, detuning wavelength $\Delta\lambda$, and device length L were thoroughly analyzed. Thereby, a high-pelfoIDlance electro-absorption modulator with device length L of $100{\mu}m$ was successfully designed. The designed structure showed excellent characteristics that have residual loss less than -1.5 dB, operational voltage from 0 V to -2V, and extinction ratios of -2.92 dB at $V_{\alpha}$=-1 V and -10 dB at $V_{\alpha}$=-2V.X>=-2V.

• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.172-174
• /
• 2003

In this paper, we analyze the traveling-wave electro-absorption modulator (TW-EAM) in consideration of the microwave feed-line. The TW-EAM is analyzed by using the equivalent circuit model. The microwave feed-line isanalyzed by momentum method. In a view point of microwave characteristics, we present the effect of the structure and the length of microwave feed-line.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.270-271
• /
• 2000

Among many optical modulators, we are interested in traveling-wave(TW) multiple quantum well(MQW) electro-absorption modulator which can be used for wide-band applications, covering DC to 30GHz or higher frequencies. In this study, we simulate a 1.3mm InGaAs/lnGaAsP TW MQW EAM using the 3D Finite Difference-Time Domain (FDTD) method. We identify that several geometric factors affect Microwave charateristics. Our calculated data provide useful information to optimize and fabricate ridge-type TW CPW EAM.