• 제목/요약/키워드: electrical resistivity method

검색결과 838건 처리시간 0.028초

Fe - Hf - O계 박막에서 조성이 미세구조 및 연자기 특성에 미치는 효과 (Effects of Composition on Soft Magnetic Properties and Microstructures of Fe-Hf-O Thin Films)

  • 박진영;김종열;김광윤;한석희;김희중
    • 한국자기학회지
    • /
    • 제7권5호
    • /
    • pp.237-242
    • /
    • 1997
  • 초미세결정 구조를 갖는 Fe-Hf-O계 연자성박막을 Ar+ $O_{2}$ 혼합가스 중에서 산소분압을 10%로 고정하고 Hf의 면적비를 변화시켜 반응성 스퍼터링에 의해 제조하였다. 가장 우수한 연자기 특성을 나타낸 F $e_{82}$H $f_{3.4}$ $O_{14.6}$의 초미세결정 박막의 경우 증착상태에서 각각 포화자속밀도 17.7 kG, 보자력 0.7 Oe 및 실효투자율 (0.5 ~ 100 MHz) 2,500을 나타내었다. Fe-Hf-O계 박막의 조성은 고정된 산소분압 하에서 Hf함량의 변화에 따라 박막내 산소의 함량이 비례하여 변화하였다. 또한 미세구조는 Hf-oxide의 함량이 적은 경우에는 .alpha. -Fe 결정상에 Hf-oxide가 석출된 형태로 나타났으며 Hf-oxide의 양이 증가할수록 .alpha. -Fe 결정상과 Hf-oxide 비정질의 혼상을 거쳐 전체적으로 비정질로 변화하는 경향을 나타내었다. Fe-Hf-O계 박막의 전기비저항은 Hf-oxide의 양이 증가할수록 증가하는 경향을 나타내었고 가장 우수한 연자기 특성을 나타내는 F $e_{82}$H $f_{3.48}$ $O_{14.6}$ 박막의 경우, 약 150 .mu. .ohm. cm로 $O_{2}$를 첨가하지 않은 경우의 30 .mu. .ohm. cm에 비하여 약 5배 증가된 값을 나타내었다. 또한 Fe-Hf-O 박막의 성능지수는 수십 MHz 영역에서 20 ~ 50의 값을 나타내었다.내었다.다.내었다.다.

  • PDF

태양전지(太陽電池) 원재료(原材料)로 사용(使用)하기 위한 폴리실리콘 미세분말(微細粉末)의 무점결제(無粘結劑) 성형(成形) (Binderless Consolidation of Fine Poly-Si Powders for the Application as Photovoltaic Feedstock)

  • 신제식;김대석;김기영;손인진;문병문
    • 자원리싸이클링
    • /
    • 제18권1호
    • /
    • pp.38-43
    • /
    • 2009
  • 본 고에서는 현행 고순도 폴리실리콘 제조공정에서 부산물로 발생하고 있는 실리콘 미세분말을 경제적인 가격에 태양전지급 원료로 재이용하고자 실리콘 미세분말의 무점결제 성형공정에 대한 연구를 수행하였다. 폴리실리콘 미세분말의 평균 크기는 $7.8{\mu}m$였으며, 주요 불순물은 표면 산화물과 수분이었다. 표면 산화물을 제거하기 위한 HF수용액-에탄올 혼합용액을 이용한 전처리공정을 행함으로써 폴리실리콘 분말의 성형성 그리고 성형체의 밀도 및 강도를 향상시킬 수 있었다. 진공 중에서 성형하는 경우 성형체 회수율이 20%증가하였다. 폴리실리콘 미세 분말은 공정 부산물 상태에서는 태양전지용 원료로 사용되기에 적합한 순도가 아니었지만, 건식 열처리를 행함으로써 태양전지급 이상의 순도를 확보할 수 있었다.

A topological metal at the surface of an ultrathin BiSb alloy film

  • Hirahara, T.;Sakamoto, Y.;Saisyu, Y.;Miyazaki, H.;Kimura, S.;Okuda, T.;Matsuda, I.;Murakami, S.;Hasegawa, S.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.14-15
    • /
    • 2010
  • Recently there has been growing interest in topological insulators or the quantum spin Hall (QSH) phase, which are insulating materials with bulk band gaps but have metallic edge states that are formed topologically and robust against any non-magnetic impurity [1]. In a three-dimensional material, the two-dimensional surface states correspond to the edge states (topological metal) and their intriguing nature in terms of electronic and spin structures have been experimentally observed in bulk Bi1-xSbx single crystals [2,3,4]. However, if we want to know the transport properties of these topological metals, high purity samples as well as very low temperature will be needed because of the contribution from bulk states or impurity effects. In a recent report, it was also shown that an intriguing coupling between the surface and bulk states will occur [5]. A simple solution to this bothersome problem is to prepare a topological metal on an ultrathin film, in which the surface-to-bulk ratio is drastically increased. Therefore in the present study, we have investigated if there is a method to make an ultrathin Bi1-xSbx film on a semiconductor substrate. From reflection high-energy electron diffraction observation, it was found that single crystal Bi1-xSbx films (0${\sim}30\;{\AA}A$ can be prepared on Si(111)-$7{\times}7$. The transport properties of such films were characterized by in situ monolithic micro four-point probes [6]. The temperature dependence of the resistivity for the x=0.1 samples was insulating when the film thickness was $240\;{\AA}A$. However, it became metallic as the thickness was reduced down to $30\;{\AA}A$, indicating surface-state dominant electrical conduction. Figure 1 shows the Fermi surface of $40\;{\AA}A$ thick Bi0.92Sb0.08 (a) and Bi0.84Sb0.16 (b) films mapped by angle-resolved photoemission spectroscopy. The basic features of the electronic structure of these surface states were shown to be the same as those found on bulk surfaces, meaning that topological metals can be prepared at the surface of an ultrathin film. The details will be given in the presentation.

  • PDF

물리탐사를 활용한 땅밀림 원인분석의 사례적 연구 (A Case Study on the Cause Analysis of Land creep Using Geophysical Exploration)

  • 박재현;탁경미;임국묵
    • 한국산림과학회지
    • /
    • 제112권3호
    • /
    • pp.382-392
    • /
    • 2023
  • 최근 기후변화와 지질환경변화로 인해 산지토사재해의 발생 빈도가 급증하는 경향이 보고되고 있다. 최근 국내에서 땅밀림이 빈번하게 발생하고 있는 만큼, 땅밀림지의 체계적이고 효율적인 복구 및 관리가 필요하다. 본 연구는 경기도 양평군 개군면 자연리 산 4-1에 발생한 땅밀림에 대하여 물리탐사기법을 통해 재해취약성을 파악하고, 파괴 지반의 전반적 지질구조를 규명하여 안정성을 검토하는 것이 목적이다. 또한, 시추조사도 함께 실시하여 측정한 데이터의 신뢰성을 검증하였다. 연구 결과, 토사층과 풍화대의 상부에 저비저항 이상대가 분포하며, 이 구간은 탐사측선 50-120 m 구간으로 땅밀림현상의 주요 지시자인 인장균열이 관찰되는 연경도가 낮은 땅밀림구역으로 확인되며, 토사층 내에 불연속면 잔존 가능성을 추정한 후, 활동연약대를 안정시키는 복구방법을 강구하였다. 따라서 국내 현실에서 땅밀림 위험지를 파악하여 땅밀림 발생 징후에 대한 지속적인 모니터링을 통해 경제적, 사회적 피해를 줄일 수 있는 대책마련을 위한 연구가 필요하다고 사료된다.

THE CURRENT STATUS OF BIOMEDICAL ENGINEERING IN THE USA

  • Webster, John G.
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1992년도 춘계학술대회
    • /
    • pp.27-47
    • /
    • 1992
  • Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

  • PDF

PREPARATION OF AMORPHOUS CARBON NITRIDE FILMS AND DLC FILMS BY SHIELDED ARC ION PLATING AND THEIR TRIBOLOGICAL PROPERTIES

  • Takai, Osamu
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2000년도 추계학술발표회 초록집
    • /
    • pp.3-4
    • /
    • 2000
  • Many researchers are interested in the synthesis and characterization of carbon nitride and diamond-like carbon (DLq because they show excellent mechanical properties such as low friction and high wear resistance and excellent electrical properties such as controllable electical resistivity and good field electron emission. We have deposited amorphous carbon nitride (a-C:N) thin films and DLC thin films by shielded arc ion plating (SAIP) and evaluated the structural and tribological properties. The application of appropriate negative bias on substrates is effective to increase the film hardness and wear resistance. This paper reports on the deposition and tribological OLC films in relation to the substrate bias voltage (Vs). films are compared with those of the OLC films. A high purity sintered graphite target was mounted on a cathode as a carbon source. Nitrogen or argon was introduced into a deposition chamber through each mass flow controller. After the initiation of an arc plasma at 60 A and 1 Pa, the target surface was heated and evaporated by the plasma. Carbon atoms and clusters evaporated from the target were ionized partially and reacted with activated nitrogen species, and a carbon nitride film was deposited onto a Si (100) substrate when we used nitrogen as a reactant gas. The surface of the growing film also reacted with activated nitrogen species. Carbon macropartic1es (0.1 -100 maicro-m) evaporated from the target at the same time were not ionized and did not react fully with nitrogen species. These macroparticles interfered with the formation of the carbon nitride film. Therefore we set a shielding plate made of stainless steel between the target and the substrate to trap the macropartic1es. This shielding method is very effective to prepare smooth a-CN films. We, therefore, call this method "shielded arc ion plating (SAIP)". For the deposition of DLC films we used argon instead of nitrogen. Films of about 150 nm in thickness were deposited onto Si substrates. Their structures, chemical compositions and chemical bonding states were analyzed by using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy and infrared spectroscopy. Hardness of the films was measured with a nanointender interfaced with an atomic force microscope (AFM). A Berkovich-type diamond tip whose radius was less than 100 nm was used for the measurement. A force-displacement curve of each film was measured at a peak load force of 250 maicro-N. Load, hold and unload times for each indentation were 2.5, 0 and 2.5 s, respectively. Hardness of each film was determined from five force-displacement curves. Wear resistance of the films was analyzed as follows. First, each film surface was scanned with the diamond tip at a constant load force of 20 maicro-N. The tip scanning was repeated 30 times in a 1 urn-square region with 512 lines at a scanning rate of 2 um/ s. After this tip-scanning, the film surface was observed in the AFM mode at a constant force of 5 maicro-N with the same Berkovich-type tip. The hardness of a-CN films was less dependent on Vs. The hardness of the film deposited at Vs=O V in a nitrogen plasma was about 10 GPa and almost similar to that of Si. It slightly increased to 12 - 15 GPa when a bias voltage of -100 - -500 V was applied to the substrate with showing its maximum at Vs=-300 V. The film deposited at Vs=O V was least wear resistant which was consistent with its lowest hardness. The biased films became more wear resistant. Particularly the film deposited at Vs=-300 V showed remarkable wear resistance. Its wear depth was too shallow to be measured with AFM. On the other hand, the DLC film, deposited at Vs=-l00 V in an argon plasma, whose hardness was 35 GPa was obviously worn under the same wear test conditions. The a-C:N films show higher wear resistance than DLC films and are useful for wear resistant coatings on various mechanical and electronic parts.nic parts.

  • PDF

점성액체 기포탑에서 탑의 직경이 기포, wake 및 연속액상 체류량에 미치는 영향 (Effects of Column Diameter on the Holdups of Bubble, Wake and Continuous Liquid Phase in Bubble Columns with Viscous Liquid Medium)

  • 임대호;장지화;강용;전기원
    • Korean Chemical Engineering Research
    • /
    • 제49권5호
    • /
    • pp.582-587
    • /
    • 2011
  • 점성액체 기포탑에서 기포, wake 및 연속액상들의 체류량 특성을 고찰하였다. 기포탑의 직경(0.051, 0.076, 0.102 and 0.152 m ID), 기체 유속(0.02~0.16 m/s) 그리고 연속액상의 점도(0.001~0.050 $Pa{\cdot}s$)가 기포, wake 및 연속액상의 체류량에 미치는 영향을 검토하였다. 기포, wake 그리고 연속액상들은 이중 전기 저항탐침방법에 의하여 성공적으로 구별할 수 있었다. 압축된 여과공기와 물 또는 CMC 수용액을 각각 기체와 연속액상으로 사용하였다. 기포탑에서 기포와 wake 상들을 연속적으로 검침하기위해 자료수집장치(DT 2805 Lab Card)와 컴퓨터를 사용하였다. 탐침 써키트로부터 수집된 아날로그 자료는 디지털 자료로 변환되었으며, 이들 자료를 이용하여 기포탑에서 상승하는 단일기포 뿐만이 아니라 다중기포들의 후면에서 wake 상을 검침할 수 있었다. 기포와 wake 상의 체류량은 각각 기포탑의 직경과 연속액상의 점도가 증가함에 따라 감소하였으나 연속액상의 체류량은 증가하였다. 그러나, 기포와 wake의 체류량은 각각 기체 유속이 증가함에 따라 증가한 반면 연속액상의 체류량은 감소하였다. wake 상 체류량에 대한 기포 체류량의 비율은 기포탑의 직경 또는 기체의 유속이 증가함에 따라 감소한 반면 연속액상의 점도가 증가함에 점성액체 기포탑에서 기포, wake 그리고 연속액상의 체류량은 본 연구의 실험범위에서 다음과 같은 실험변수의 상관식으로 나타낼 수 있었다. ${\varepsilon}_B=0.043D^{-0.18}U_G^{0.56}{\mu}_L^{-0.13}$, ${\varepsilon}_W=0.003D^{-0.85}U_G^{0.46}{\mu}_L^{-0.10}$, ${\varepsilon}_C=1.179D^{0.09}U_G^{-0.13}{\mu}_L^{0.04}$.

무령왕릉보존에 있어서의 지질공학적 고찰

  • 서만철;최석원;구민호
    • 대한자원환경지질학회:학술대회논문집
    • /
    • 대한자원환경지질학회 2001년도 제17차 공동학술강연회 및 춘계학술답사
    • /
    • pp.42-63
    • /
    • 2001
  • 무령왕릉의 보존대책을 수립하기 위하여 누수 현상, 고분구조 벽체거동 상황 및 구조안전점검, 고분 내에 서식하는 조류의 제거, 고분내 습기 및 결로현상 제거를 위한 공기조화시설 등을 포함하는 종합 정밀저사를 1996년 5월 1일 부터 1997년 4월 30일 까지 1년간 수행하였다. 이러한 연구를 수행하기 위하여 기초 지반에 대한 정밀측량, 고분 내외부의 년중 온습도 모니터링, 지반의 내부물성 파악을 위한 지구물리 탐사, 시추 자료에 대한 각종 물성실험, 지반의 투수계수 측정 및 지구화학적 분석을 실시하였다. 고분 내외부에 대한 정밀측량 결과 봉분 중심의 현실 중심보다 북동쪽으로 5m 이격되어 있다. 무령왕릉의 경우는 발굴 당시에도 유사한 분포를 하였으나, 이로 인하여 불균형적인 토압을 발생시키는 원인이 되고 있다. 벽돌깨짐 상황 조사결과 무령왕릉의 조사 대상 벽돌 6025장중 1972년에는 435장 파손되었던 것이 1996년 조사결과 1072장이 파손된 것으로 밝혀져 파손율이 2.5배로 증가하였다. 6호분의 경우는 이보다 더 심하여 벽돌 파손율이 2.9배로 증가하고 있다. 1972년 상황은 약 1450년간 진행된 것이고 1996년의 상황은 불과 24년간 진행된 것임을 감안할 고분이 발굴된 이후 벽돌의 균열은 상당한 가속도로 진행되어 온것이 사실이며 이대로 진행된다면 더욱 더 가속화될 것으로 판단된다. 고분벽체의 거동상태를 계측한 결과 무령왕릉 동측벽의 경우 우기와 건기에 각각 2.95 mm/myr및 1.52 mm/myr의 거동을 보여 우기에 지하수 유입에 의한 지반의 약화로 인하여 건기보다 2배정도 거동하는 양상을 보인다. 한편, 연도 입구의 호벽은 건기에 전실쪽으로 0.43 mm/myr, 연도쪽으로 2.05 mm/myr의 거동을 보여 무령왕릉에서는 가장 심한 거동을 보이고 있다. 6호분의 거동현황은 건기에만 측정된 바, 현실의 동측벽과 서측벽이 각각 벽체 뒤쪽으로 7.44 mm/myr, 현실안쪽으로 3.61 mm/myr의 거동을 보여 조사대상 5호분, 6호분, 7호분, 중 가장 심한 거동을 보이고 있다. 이는 고분 벽돌의 깨짐이 6호분이 가장 심하다는 사실과 무관하지 않은 것으로 판단된다. 봉분내부의 토양층구조에 대한 지오레이다 영상단면을 분석한 결과 무령왕릉 연도상부의 누수지방지층이 심하게 균열되어 있음을 발견하였다. 이 곳은 고분내부로 직접누수가 발생하는 곳이다. 직접누수와 지하수 형태로 유입된 침투수는 고분군 주위의 지반의 함수비를 증가시켜 지반의 지지력을 약화시키고 또한 고분내로 서서히 유입되어 고분내부의 습도를 100%로 유지시키는 주된 원인이다. 이러한 높은 습도는 고분내의 남조류의 번식을 가져왔으며 남조류의 번식은 현재 6호분이 가장 심각하고 7호분이 우려되는 수준이며 5호분은 문제가 없는 것으로 판단된다. 이와 같이 고분군의 발굴후 인위적인 환경변화와 지속적인 강우침투 및 배수 불량의 영향은 고분군의 안정성에 상당한 위험을 초래하였으며, 현 상태는 각 고분에 대한 보강이 불가피한 것으로 판단된다. 고분 벽돌의 깨짐, 고분 벽체의 거동, 조류의 서식등을 포함하여 송산리 고분군에서 발생되고 있는 보존상의 제반 문제점들을 일차적으로 누수 및 침투수에 의한 결과이다. 그러므로 무엇보다도 고분군 내부 및 고분 주변으로의 강우 및 지하수 침투를 막는 차수 대책이 시급한 것으로 판단된다. 또한 이미 발생한 변위가 더 이상 진행되지 않도록 하중을 경감하고 토압의 균형을 이루는 보강대책이 시급한 실정이다. 고분군의 보존대책으로는 고분의 구조안전에 관하여 근본적인 구조변경이 불가피한 직접 보강대책보다 간접적인 보강대책이 바람직한 것으로 판단된다. 간접적 보강대책으로서는 현 봉분규모의 축소, 불균등토압의 조정, 강우침투 방지를 위한 최종복토시스템, 유도배수구의 설치 및 능선 상부로부터의 지하수 차단시설을 포함한다. 이러한 차수대책은 고분군의 제문제를 해결하는 가장 근본적인 대책이라 할 수 있다. 고분내 결로현상 및 습기 제거를 위하여 항온항습장치를 전실에 설치하고 덕트를 통하여 고분내 현실로 순환시키는 방법을 제안하며 외부 온도의 영향을 덜 받게 하기 위하여 전실상부 토양을 현재보다 두껍게 하고 전실의 천정마감재를 열전도도가 낮은 목재로 교체하며 출입문의 이동등을 제안하였다. 금번 조사 연구를 통하여 얻어진 각종 보수 및 보존대책은 고분구조 자체에 가능한 한 최소의 변화를 주면서 가장 시급한 문제점부터 해결하도록 제시되었다. 설계 및 시공단계에서는 보수의 경중을 가려 순서에 입각하여 이루어져야만 하며 설계 및 시공단계에서 고분의 구조안전에 영향을 주지 않도록 각별한 주의가 요망된다. 끝으로, 상기의 보수대책이 실시된 후 이에 대한 평가 및 향후의 영구 보존을 위한 벽체경사 계측, 함수비 및 지하수위 계측, 온습도 측정 등을 포함하는 사후계측시스템은 필수적이라 할 수 있다. 각종 계측자료를 이용한 장기적이고도 세심한 분석을 통하여 완벽한 보존 관리가 이루어져야할 것으로 사료된다.로 사료된다.

  • PDF