• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.205-205
• /
• 2009

As a p-type semiconductor NiO is potential material which can be used in many application including QD-LED. NiO films were deposited on glass substrates using rf-sputtering method. The properties of resistivity, surface roughness, etc in the NiO films were investigated at different sputtering parameters. The resistivity of $l.88{\times}10^{-2}{\sim}3.71{\times}10^{-2}{\Omega}cm$ with sputtering power(80~200 watts) and change was very low. The sputtering pressure at 3~60 mTorr resulted in rather broad change ofresistivity of $0.58{\times}10^{-2}{\sim}4.67{\Omega}cm$. The oxygen content in sputtering gas was found to be very effective to control the resistivity from $2.01{\times}10^{-2}$ to $1.22{\times}10^2{\Omega}cm$ with 100~2.5% $O_2$ in Ar gas. In addition, the surface roughness showed the RMS values of 0.6~1.1 nm and the dependence on sputtering parameters was weak.

• 한국전기전자재료학회논문지
• /
• 제35권2호
• /
• pp.172-177
• /
• 2022

The quench voltage of the second-generation superconducting wire is affected by the resistivity characteristics of the stabilization layer. The specific resistance of the stabilization layer can be changed by the deposition process using RF magnetron sputtering. In this paper, a thin film made of a homogeneous material (Ag) and a dissimilar material (Cu) was deposited on the stabilization layer of the second-generation superconducting wire through RF magnetron sputtering. We found that the specific resistance was reduced by increasing the thickness of the stabilization layer. The reduction in the resistivity of the stabilization layer led to a decrease in the quench voltage of the second-generation superconducting wire. We suggest that various characteristic changes of the second-generation superconducting wire can be expected through the successful change in the resistivity of the stabilization layer of the proposed deposition process.

• 한국재료학회지
• /
• 제25권3호
• /
• pp.119-124
• /
• 2015

This paper investigates the change of the percolation threshold in the carbon powder-filled polystyrene matrix composites based on the experimental results of changes in the resistivity and relative permittivity of the carbon powder filling, the electric field dependence of the current, and the critical exponent of conductivity. In this research, the percolation behavior, the critical exponent of resistivity, and electrical conduction mechanism of the carbon powder-filled polystyrene matrix composites are discussed based on a study of the overall change in the resistivity. It was found that the formation of infinite clusters is interrupted by a tunneling gap in the volume fraction of the carbon powder filling, where the change in the resistivity is extremely large. In addition, it was found that the critical exponent of conductivity for the universal law of conductivity is satisfied if the percolation threshold is estimated at the volume fraction of carbon powder where non-ohmic current behavior becomes ohmic. It was considered that the mechanism for changing the gaps between the carbon powder aggregates into ohmic contacts is identical to that of the connecting conducting phases above the percolation threshold in a random resister network system. The electric field dependence is discussed with a tunneling mechanism. It is concluded that the percolation threshold should be defined at this volume fraction (the second transition of resistivity for the carbon powder-filled polystyrene matrix composites) of carbon powder.

• 한국전기전자재료학회논문지
• /
• 제15권6호
• /
• pp.518-523
• /
• 2002

The influences of ion beam energy and reactive oxygen partial pressure on the physical and crystallographic characteristics of transition metal oxide compound(CrOx) film were studied in this paper. Chromium oxide films were deposited onto a cover-glass using ion Beam Sputter Deposition(IBSD) technique according to the various processing parameters. Crystallinity and grain size of as-deposited films were analyzed using XRD analysis. Thickness and Resistivity of the films were measured by $\alpha$-step and 4-point probe measurement. According to the XRD, XPS and resistivity results, the deposited films were the cermet type films which had crystal structure including amorphous oxide(a-oxide) phase and metal Cr phase simultaneously. The increment of the ion beam energy during the deposition process led to decreasing of metal Cr grain size and the rapid change of resistivity above the critical $O_2$ partial pressure.

• 지구물리와물리탐사
• /
• 제22권3호
• /
• pp.160-167
• /
• 2019

저수지 제체는 3차원 전기비저항 구조로 구성되어 있기 때문에, 전기비저항 격자구조에 담수호의 수위변화에 따른 제체 내부의 침윤선 변동과 함께 담수호의 전기전도도가 고려되지 않는 경우 전기비저항 역산 결과가 왜곡될 수 있다. 이 연구에서는 3차원 전기비저항 탐사 모델링을 통하여, 저수지의 3차원 비저항 구조와 저수지 수위의 변화에 따른 제체 내부의 비저항 변화를 해석하였다. 이 분석 결과에 근거하여 국내 283개소 저수지를 대상으로 3차원 모델링에 의한 2차원 이론자료와 현장 2차원 탐사자료에 대한 역산 결과를 비교하였다. 마지막으로 두 역산의 비가 50% 이상이 되는 저수지를 추가 정밀조사 대상 저수지로 선정하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2006년도 춘계학술대회 논문집
• /
• pp.288-292
• /
• 2006

Usually, equations that calculate ground resistance of earth electrode was already informed well by form of earth electrode. But, when apply on the spot because general expressions are very insufficient at point that calculate exact ground resistance value by variation of earth electrode, and constant value that corrective coefficient for ground resistance calculation is fixed regardless of change of the earth resistivity specially is presented, it is actuality that difficulty is. Therefore, in this study, about these problem, proposed corrective coefficient for calculation of ground resistance according to change of the earth resistivity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 학술대회 논문집 전문대학교육위원
• /
• pp.75-78
• /
• 2002

In this paper, we investigated the change of wettability, surface potential decay and surface resistivity caused by thermal-treated and plasma-treated FRP respectively for finding out the influence of electrical characteristics on the surface of polymer composites. For the change of wettability, the contact angle of thermal-treated specimen with the high temperature of 200$^{\circ}C$ increased. But that of plasma-treated specimen decreased. The characteristic of surface potential decay shows the tendency of the remarkable decrease on plasma-treated specimens, but no difference on thermal-treated specimen compared with untreated one. Also, for the surface resistivity, it shows the same trend compared with the change of contact angle. We can conclude that the degradation phenomena of epoxy surface are dominated by the induction of hydrophilicity and hydrophobicity.

• 지질공학
• /
• 제7권2호
• /
• pp.139-149
• /
• 1997

전기비저항 모니터링을 이용하여 충적층 지하수위의 변동을 감지 할 수 있는지의 여부가 연구되었다. 연구는 유한요소법을 이용한 전기비저항 수치 모델링 시험과 20일간의 장기 양수 시험이 수행된 금강 정동리 지역의 현장 자료를 이용하여 수행되었다. 수치 모델링 시험 및 현장 자료 획득은 전극 기본 간격이 4m인 21개의 고정전극을 이용하였으며, 전극배열은 "변형 웨너 배열"과 쌍극자 배열을 이용하였다. 현장 장기 양수 시험에서 관측된 수위 변화를 단순화하여 지하 2차원 비저항 모델로 사용한 사용한 결과, 겉보기 전기비저항의 변화 양상은 수위 변화보다 둔감한 변화 양상을 보여 주며, 수위 변화가 있는 부분뿐만 아니라하부 결정질 기반암의 경계 부위에 해당하는 심도에서도 겉보기 비저항 장치가 변화하는 현상이 관측되었다. 이러한 수치 결과와 부합되는 결과가 실제 현장에서 획득된 겉보기 전기 비저항 단면에서도 나타났다. 수치 계산결과 및 현장 자료는 전기 비저한 모니터링이 지하수위 변동을 유무 감지하는데 유용하게 사용될 수 있음을 보여주었다. 그러나 겉보기 전기비저항 단면이 수위 변동량을 정량적으로 규명할 만큼의 뚜렷한 변화를 보여주지는 못하기 때문에 전기비저항 방법만으로 정략적인 수위변동을 감지하는데 한계가 있는 것으로 판단되었다. 이러한 지하 수위 변동량 등을 명확히 규명하기 위해서는 고해상도 탄성파 또는 지하레이다 탐사처럼 지하의 모습을 영상화 할 수 있는 지구물리 탐사법이 병행되는 것이 바람직하다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2001년도 추계학술발표회
• /
• pp.92-96
• /
• 2001

Although the problem of seawater intrusion at the coastal aquifer was recognized before over one hundred years at the coastal aquifer, much groundwater keep on being salinitized by several reasons such as groundwater exhaustion, coastalline change, and human activities. The horizontal and vertical electrical soundings and geostatistical methods were used to define the local characteristics of saltwater intrusion and to estimate the saltwater interface in the southeastern area of the Pusan City. The 24 points of the Schlumberger vertical electrical soundings(VES) to loom depth and the 2 lines of dipole-dipole horizontal soundings are peformed. The resistivity data have lognormal distributions. The horizontal extents of saline water intrusion were estimated from the inversion of horizontal prospecting data. Lognormal ordinary kriging is used in A-A' resistivity profiles on May and July because the data have stationary models in semivariograms. Lognormal IRF-k kriging is used for the isopleth maps using vertical resistivity data. The 10 ohm-m resistivity line on the isopleth maps of 21m, 30m, 50m, and 70m depth using resisitivity data measured in July is sifted to the east, cpomparing that of the isopleth maps measured in May. The kriged vertical and horizontal resistivity isopleth maps suggested that the geostatistical methods can be used to define the variation of earth resistivity distribution at the saltwater interface.

• 한국재료학회지
• /
• 제17권9호
• /
• pp.453-457
• /
• 2007

Interest in use of ink-jet printing for pattern-on-demand fabrication of metal interconnects without complicated and wasteful etching process has been on rapid increase. However, ink-jet printing is a wet process and needs an additional thermal treatment such as an annealing process. Since a metal ink is a suspension containing metal nanoparticles and organic capping molecules to prevent aggregation of them, the microstructure of an ink-jet printed metal interconnect 'as dried' can be characterized as a stack of loosely packed nanoparticles. Therefore, during being treated thermally, an inkjet-printed interconnect is likely to evolve a characteristic microstructure, different from that of the conventionally vacuum-deposited metal films. Microstructure characteristics can significantly affect the corresponding electrical and mechanical properties. The characteristics of change in microstructure and electrical resistivity of inkjet-printed silver (Ag) films when annealed isothermally at a temperature between 170 and $240^{\circ}C$ were analyzed. The change in electrical resistivity was described using the first-order exponential decay kinetics. The corresponding activation energy of 0.44 eV was explained in terms of a thermally-activated mechanism, i.e., migration of point defects such as vacancy-oxygen pairs, rather than microstructure evolution such as grain growth or change in porosity.